On Sun, 5 Jun 2011 18:01:23 -0700, jim wrote in message <[email protected]>:
> i agree this is a great idea. it is likely a way to get good little > chunkettes without lots of machinery. slash is a very significant > fuel resource in many places we've found. in the tropical bush, it > is likely the most important and accessible. > > the electric chainsaws have also come a long way. if your gasifier > is part of a genset making electricity, you could use that to run the > chainsaw and be self contained without need for petrol. ..sissies, run gas hoses to your saw. ;oD > tom, there are many cnc laser cutting services that will cut out > parts like this for you. ..nope, mr Mass Production, stamp them out of sheet metal, clamp 'em, drill 'em, bend 'em in a brake, then pack'em and ship 'em. ;o) > the laser makes a near perfectly clean cut, > without any slag. it is much easier and cleaner than the plasma > cutter based systems. > > sadly, a cnc laser system costs multiple hundreds of thousands of > dollars. a cnc plasma 15k or so. maybe someday. in the interim, > there are many services cropping up that will do small runs for you > on their machines. ..cnc cutters would be the thing to make stamp etc tools with. -- ..med vennlig hilsen = with Kind Regards from Arnt Karlsen ...with a number of polar bear hunters in his ancestry... Scenarios always come in sets of three: best case, worst case, and just in case. _______________________________________________ Gasification mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org for more Gasifiers, News and Information see our web site: http://gasifiers.bioenergylists.org/
