Hi Clement,
On Fri, 2011-08-26 at 23:58 +0000, Clement Aigbogun wrote: > I believe it should be the same way for all biomass reduction, ie via > a gasifier. Well, this is a complicated issue. My weed charcoal producer is a loose variation of a gasifier. But before this one I had a more traditional weed gas producer and learned all about rat holing. I had to chop/reduce the weed material for the more traditional gasifier were now I gasifiy/charcoalfiy the whole bale. Also, my goal is to convert weeds into a high quality fuel with minimal investment. > But don't you worry about the smoke? No. Because, ultimately, I'll burn the off gas for thermal needs. I'm not at that point right now but have had some luck converting bales of weed into charcoal. If or when I'm happy with the charcoal conversion end I'll work on a burner for this low calorific value gas. I'm not declaring success at this point just seeing a little light at the end of the tunnel. Jeff -- ________________________________________________ www.puffergas.com Sent from any port in the storm via Acer netbook & Ubuntu Remix. _______________________________________________ Gasification mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org for more Gasifiers, News and Information see our web site: http://gasifiers.bioenergylists.org/
