The 3300 turns dark and stiff like old leather when heated. It still makes a good seal and beats the heck out of cutting gaskets that don't have its high heat range. Bruce Green
On Sun, Sep 11, 2011 at 4:22 PM, jim mason <[email protected]> wrote: > On Mon, Sep 5, 2011 at 4:56 AM, Brian D Paasch > <[email protected]> wrote: > > Depending on the location and application, we have had good success using > > Deacon products 3300 (for bolted together flange surface-to-surface > seals) > > and 4011 (for threaded fittings). We don't really care for Deacon product > > 8875-Thin, but maybe we simply did not have the correct need/application > for > > that product. > > -brian > > > brian, > > i recently found this extruded cord too and ordered some as a sample. > good to hear you've had good luck with it. how plyable do you find it > remains once heated? does it keep some level of flexibility unlike > typical black mortars? > > for those who have not seen this deacon extruded cord the link is here: > > http://www.deaconindustries.com/3300_tech.html > > jim > > > > > > On Sep 5, 2011, at 7:38 AM, Bruce Green wrote: > > > > Check out this line of high temp sealants. Deacon Industries. Bruce > Green > > http://www.deaconindustries.com/high-temperature-sealant.html > > > > On Sun, Sep 4, 2011 at 11:49 PM, Pete & Sheri <[email protected] > > > > wrote: > >> > >> > >> > >> > >> > >> From current discussions about gasification system sealing, I just > >> recalled how we sealed vacuum heat treating vessels that had to be good > down > >> to about 10 ^-6 microns or better. We used Quad rings in milled > (trepanned) > >> recesses, with vacuum greases applied. These seals were resealable many > >> dozens of times. I don’t know about temperature ranges available for > them. > >> In our case, we used them on the exterior joints of the vessels where > the > >> temps seldom exceeded the boiling point of water. But that was in the > >> 1960’s, so I wouldn’t be surprised if materials have improved a lot > since > >> then. > >> > >> A “Quad ring” is a sort-of square cross section ring, with o-shaped > >> edges. > >> > >> See: > >> > >> http://www.daemar.com/pdfs/118-DMR_Quad-Ring-GrooveDesign_01.pdf > >> > >> for a better look at one style. There are others. > >> > >> > >> > >> Pete Stanaitis > >> > >> ----------------- > >> > >> _______________________________________________ > >> Gasification mailing list > >> > >> to Send a Message to the list, use the email address > >> [email protected] > >> > >> to UNSUBSCRIBE or Change your List Settings use the web page > >> > >> > http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org > >> > >> for more Gasifiers, News and Information see our web site: > >> http://gasifiers.bioenergylists.org/ > >> > > > > _______________________________________________ > > Gasification mailing list > > > > to Send a Message to the list, use the email address > > [email protected] > > > > to UNSUBSCRIBE or Change your List Settings use the web page > > > http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org > > > > for more Gasifiers, News and Information see our web site: > > http://gasifiers.bioenergylists.org/ > > > > > > > > _______________________________________________ > > Gasification mailing list > > > > to Send a Message to the list, use the email address > > [email protected] > > > > to UNSUBSCRIBE or Change your List Settings use the web page > > > http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org > > > > for more Gasifiers, News and Information see our web site: > > http://gasifiers.bioenergylists.org/ > > > > > > > > -- > > ------------------------------------------------------------------------------ > Jim Mason > Website: http://www.whatiamupto.com > Current Projects: > - Gasifier Experimenters Kit (the GEK): http://www.gekgasifier.com > - Escape from Berkeley alt fuels vehicle race: > www.escapefromberkeley.com > - ALL Power Labs on Twitter: http://twitter.com/allpowerlabs > - Shipyard Announce list: > http://lists.spaceship.com/listinfo.cgi/icp-spaceship.com > > _______________________________________________ > Gasification mailing list > > to Send a Message to the list, use the email address > [email protected] > > to UNSUBSCRIBE or Change your List Settings use the web page > > http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org > > for more Gasifiers, News and Information see our web site: > http://gasifiers.bioenergylists.org/ >
_______________________________________________ Gasification mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org for more Gasifiers, News and Information see our web site: http://gasifiers.bioenergylists.org/
