Hello, Greg. I know that the correct solution to tar is to keep the reactor temp up, but, just in case, how do YOU test for tar?
Pete Stanaitis -------------- -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Greg Manning Sent: Monday, October 10, 2011 3:13 PM To: jai balwanshi; Discussion of biomass pyrolysis and gasification Subject: Re: [Gasification] reducing temp. of gasification Greetings, Jai, and list members. Reducing tars in gas output, is really quite simple, design a gasifier that works correctly for the desired feedstock is the main method, however, you can also design a poorly built gasifier, and use many cleaning filters after the gasifier, in the gas output pipes. But really, one must understand what "tars" are, and at what internal temperature the gasifier runs at, once this is known, then the design can be re-designed to achive the correct temperature to reduce the tars BEFORE they enter the gas output area. In other words, generally 2 or more gasifiers must be built (or the original one modified) to the point of acceptable level of tars within the gas output. Greg Manning Canadian Gasifier Ltd. _______________________________________________ Gasification mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org for more Gasifiers, News and Information see our web site: http://gasifiers.bioenergylists.org/
