Thanks,  Thomas We see that in practice but I have never seen it documented.
Do you know of any published data on load response?

 

Tom

 

From: Gasification [mailto:[email protected]] On
Behalf Of Thomas Koch
Sent: Tuesday, July 09, 2013 7:43 AM
To: Discussion of biomass pyrolysis and gasification
Subject: Re: [Gasification] Mini Grid Load Following With a Biomass Gasifier

 

Tom 

 

Load response on small gasifiers – fixed bed downdraft or fixed bed staged
gasifiers I assume -  is extremely good as there is a large inventory of
char. The principle is used for automobiles.  

 

Most of these gasifiers can go from 10 % lo0ad to 80 % load with in a few
seconds. 

 

Best regards

 

Tom  

 

Fra: Gasification [mailto:[email protected]] På
vegne af Tom Miles
Sendt: 9. juli 2013 16:38
Til: Discussion of biomass pyrolysis and gasification
Emne: [Gasification] Mini Grid Load Following With a Biomass Gasifier

 

Does anyone have any experience or data to comment on the load response of
biomass gasifiers?

 

We’re looking at using a gasifier on a mini-grid in a remote community. The
utility is looking for data to confirm that a biomass fired generator can
follow load changes on a minute to minute basis. The gasifiers will be in
the size range of 50-500 kWe. 

 

Thanks

 

Tom Miles

_______________________________________________
Gasification mailing list

to Send a Message to the list, use the email address
[email protected]

to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org

for more Gasifiers,  News and Information see our web site:
http://gasifiers.bioenergylists.org/

Reply via email to