Hi Rex, Would that accumulator between generator and I.C. engine be held at close to atmospheric pressure? Is it just an inline device or is it more "active"?
Pellets seem like the way to simplify the progression to biogas-fueled automobiles; but most of the forward thrust is provided by hobbyists, not industrialists, and hobbyists derive great pleasure from being vertically integrated! Best, Mark -----Original Message----- From: Gasification [mailto:[email protected]] On Behalf Of Rex Zietsman Sent: Wednesday, July 16, 2014 12:43 AM To: [email protected] Subject: [Gasification] Wishart gasifier I agree with Tom regarding the use of pellets. I have had the good fortune to be able to gasify small, slightly longer than matchbox size, kiln dried hard wood and the difference in performance vs wood chunks was extraordinary. One thing that always amazes me that we should be doing with car/truck based systems is that there should be a small gas storage container between the gasifier and the engine. This would provide fuel in that period when you accelerate and before the gasifier catches up. Rex --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com _______________________________________________ Gasification mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenerg ylists.org for more Gasifiers, News and Information see our web site: http://gasifiers.bioenergylists.org/ _______________________________________________ Gasification mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org for more Gasifiers, News and Information see our web site: http://gasifiers.bioenergylists.org/
