*Dear Sir *
*I am manova, I have some doubt on gasification, Last month i took a trail on 100 kg coal gasifier (pressure mode (low pressure 3Kpa ) ,Down draft) ,* *Two hours after that i received only flue so i check the level above the reactor bed, * *Again i load the coal and starting gasifier same flue only coming out,* *Gasifier initial starting time i put 50 kg charcoal and 200kg coal up to charcoal bed gas coming out without any flue * *After full and full coal reached to reactor flue only coming out* *gasifying medium : air* *air fuel ratio (coal)1:4(air)* *ultimate analysis of coal* *C-44%,H-3%,O-10%,Ash-30%,Moisture-13%* *can u provide the solution to this* *Thank you*
_______________________________________________ Gasification mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org for more Gasifiers, News and Information see our web site: http://gasifiers.bioenergylists.org/
