Mr Manova,
From what I can understand, your problems you faced are related to
running the gasifier at twice its capacity, and not due to increased
pressure.
Originally the pressure at the burner was 150 mmWC & not the rated 600
mmWC. This means the gas flow is about 50% of the rated flow.
You will have to use a gasifier of double the existing capacity to
overcome your problems.
Regards
Shivanand Ramachandran
Infinite Energy Pvt Ltd
www.gasifier.in
On 2015-05-28 04:01, Mohammed Hossein wrote:
Hello Mr. Miles,
I am from Pakistan and we run a biomass briquetting plant . We use
wood waste and sugar cane bagasse to make cylindrical briquettes which
are 30mm in dia and length around 100-150mm, The bulk density is near
650kg/M3. The heat value is around 4300kcal/kg
We would like to know from the participants in list whether they have
used biomass briquettes on fixed bed updrafts on any process heating
application. Our installation is alongside a ceramic tile unit which
uses a fixed bed updraft gasifier using thermal coal to gasifiy,
puriofy and run the kiln around 1200-1250 C.
Would love to hear from you guys
Regards
Umer Hussain
KX Power
_______________________________________________
Gasification mailing list
to Send a Message to the list, use the email address
[email protected]
to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org
for more Gasifiers, News and Information see our web site:
http://gasifiers.bioenergylists.org/
_______________________________________________
Gasification mailing list
to Send a Message to the list, use the email address
[email protected]
to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org
for more Gasifiers, News and Information see our web site:
http://gasifiers.bioenergylists.org/
