Thanks Jeff. Nice to hear about some direct experience.
Tom From: Gasification [mailto:[email protected]] On Behalf Of Jeff Davis Sent: Thursday, September 10, 2015 6:06 PM To: Discussion of biomass pyrolysis and gasification Subject: SPAM: Re: [Gasification] Open Core Rice Husk Gasifiers Hi Tom, Not sure if this applies but the Gas-of-Fire 1000 and rice husks were a nice match. Made a burnable gas and husk charcoal. Low on tar but best used for a heat application on an average. The down side was the darkish condensate and low but not low enough tar. The other down side was the lack of automation thus the need to hand feed it. Sorry, I never had the time to collect data and a few weeks ago I used it as fill for my pond expansion project. Rice husks rock, Jeff www.puffergas.com On Sep 10, 2015 10:25 AM, "Tom Miles" <[email protected]> wrote: Does anyone on the list have experience running open core gasifiers on rice husks? I’m looking for performance data or experience for operating systems for a project in Southeast Asia. The Ankur gasifiers are well documented but there is not much on open core designs. Thanks Tom Miles _______________________________________________ Gasification mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org for more Gasifiers, News and Information see our web site: http://gasifiers.bioenergylists.org/
_______________________________________________ Gasification mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org for more Gasifiers, News and Information see our web site: http://gasifiers.bioenergylists.org/
