I'm not 100% certain, but I think just changing the subnet and the default route are required in your situation. After that you're OK. No IP Passthrouhg is needed. Just make outbound mappings, tunnels and ext aliases. The private ip's can be put on the psn and routed through the GB. OR you can get really fancy and assign a private ip alias to the pro interface and have both be on the same net. I have never done this but I don't see why it wouldn't work. The downside would be adding the private ip subnet to each machines routing table manually. Hope this helps.
Jason S. Antonacci Computer Support Specialist IV Univ. of Georgia - Savannah River Ecology Lab ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Office: 803.725.5894 Pager: 706.869.4043 Fax: 503.218.7129 Email: [EMAIL PROTECTED] >>> <[EMAIL PROTECTED]> 08 Feb 00 21:41:08 >>> Send postings to: [EMAIL PROTECTED] Access the list archives at: http://www.gnatbox.com/gb-users/ ---------------------------------- Ok I am trying to put gnatbox in an existing public IP network where renumbering is not an option. I will use some private IPs just for an example, however, all the real IPs are public. I am wondering if this is possible. Let's say ISP has routed me 192.168.100.0/24 My router is 192.168.100.1/24 I want to put gnatbox in between my current servers which are on that same subnet. So EXT IF on gnatbox I assume could be 192.168.100.2/30 (this would allow it to talk to the router on .1) Now what would need to be entered on the PRO IF for an IP assuming all the servers reside on the /24 Also, I assume you would have to use IP Passthrough?? What would you enter in that part of the setup? ---------------------------------------------- To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe gb-users your_email_address in the body of the message
