|
One question:
I just did the same thing last weekend and forgot
to change the www access rule # 1 to the new IP address. Did you go in and
change the IP address to the new IP ?
If not, go into the console then "filters >
Remote Access", scroll up to the rule base that handles your "www" access for
your web remote access and change the IP.
HTH's,
Mike
----- Original Message -----
Sent: Saturday, February 26, 2000 2:39
PM
Subject: Changed Protected IP
Address
Send postings to: [EMAIL PROTECTED]
Access the list
archives at:
http://www.gnatbox.com/gb-users/
----------------------------------
I
changed the IP addresses on my protected network, including the
gnatbox,
and set the default gateway on all the clients to the new address
for the
GnatBox. Now I can't access the GnatBox using the web
interface. I can
ping it, and I can ping other stations from the
GnatBox console, but I can't
connect to it.
Any ideas?
Joab
Ben Stieglitz
[EMAIL PROTECTED]
http://stieg.home.netcom.com/
----------------------------------------------
To
Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe
gb-users your_email_address
in the body of the
message
|
