Hello.. We are using GNATBox Pro 3.0.3 at two locations. The local GNATBox frequently fails to save configuration changes. I have replaced the floppy disk three or four times in the last six months, but the problem continues.
We host multiple servers and I make changes to the GNATBox about two to four times a month. Sometimes the change is time critical and this problem becomes a big annoyance. Our Remote GNATBox running 3.0.3 never has a problem. I am wondering if any of the following could be the cause this problem and if any of you have similar experience and have a solution. 1. Bad or dirty floppy drive (the PC that runs GNATBOX is about 4 years old) 2. To much traffic during the save changes function. (I doubt this) 3. Corrupted software. I am guessing we have a failing floppy drive. I have read the mail to this list for two years and have learned a lot for you all. Thanks to everyone! --------------------- Tom Sparks Network Administrator POP! Multimedia 206.728.7997 tel 206.728.1144 fax www.popmultimedia.com
