> ----- Original Message -----
> From: <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Thursday, July 20, 2000 1:08 PM
> Subject: Web enabling Notes
>
> <SNIP>
> > My question is this. I believe that I will need a 'real' IP address for
> > the server on the DMZ, so that I can use IP passthrough to get to it
from
> > the internet, is this correct? I believe that using the 'tunnel and
> > filter' method would send all port 80 traffic to this box, which is
> > definitely not what I want.
> >
> Yes, if you only have one IP. If you have a block of external IP
> addresses you can use, use the aliasing feature of the GB to add an
> additional IP to the external interface. From that point, define another
> tunnel, using Alias_IP:80 to DMZ_address:80, and set filters as required.
> DNS records optional. As far as I know, this is exactly what Aliasing is
> for. I'm using it here with no problems.
>
> However, if you only have one IP, the best you can do is to specify a
> different port, but that's hard on the end users.
>
> I'm assuming here that you already have a webserver in place that you
don't
> want interfered with.
>
>
> Signing off,
>
> Joseph C. Bender,
> Systems Analyst, Burns & Wilcox, LTD
> <[EMAIL PROTECTED]>
> 248-932-9000
>
> #include <std_disclaimer.h>
> My opinions are NOT that of Burns&Wilcox Ltd.
> ----- Original Message -----
> From: <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Thursday, July 20, 2000 1:08 PM
> Subject: Web enabling Notes
>
>
>
