I had a rather strange problem recently that involved V3.1.2 on a GB1000 Basically the Protected Network had been talking to the DMZ/PSN networks OK and then delays started to become apparent which only affected that environment, and worsened the more load the GB1000 was under.
Rebooting had no effect, I used a spare GB1000 and imported the configuration then put it into service - it ran fine on the spare box. I then reloaded the config onto the 1st GB1000 and put that back in as the primary unit - it ran fine there as well. It appeared that the in memory configuration was somehow corrupt - though it never manifested itself in any way but that described above. Best Regards, Steve Leach Network Manager Miami International Limited Eaglescliffe Logistics Centre Durham Lane Egglescliffe URL: http://www.askalix.com TEL: 01642 356205 e-mail: [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Guy Sudron Sent: 03 October 2001 09:00 To: [EMAIL PROTECTED] Subject: Strange One UPDATE --------------------- Attention ----------------------------- A digest version of this list is now available. Send email to [EMAIL PROTECTED], with the following message: subscribe gb-users-digest your_email_address Then unsubscribe from this list. ------------------------------------------------------------- GNAT Box User Forum http://www.gnatbox.com/cgi-bin/Ultimate.cgi Send postings to: [EMAIL PROTECTED] Access the list archives at: http://www.gnatbox.com/gb-users/ ------------------------------------------------------------- Additional info - it was a GB1000, running 3.1.3s. Have since reset to factory defaults, setup our IP addresses and it seems to be ok. Only think I can think of is that the original config files somehow got corrupted. If anyone can shed any further light? TIA Guy ---------------------------------------------- To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe gb-users your_email_address in the body of the message
