Tom We have five GNATBoxes, (all running on the industrial cased PC's supplied by GTA) and one of them shows the same problem. We've changed the floppy drive twice, but it made no difference. We ended up changing to GBFlash! (Not a budget solution, but it worked!).
Sorry I can't be of more help. Brian Adams > -----Original Message----- > From: Tom Sparks [SMTP:[EMAIL PROTECTED]] > Sent: 19 December 2001 17:48 > To: [EMAIL PROTECTED] > Subject: [gb-users] Failure to save problem > > Hello.. > > We are using GNATBox Pro 3.0.3 at two locations. Our local GNATBox > frequently fails to save configuration changes. I have replaced the > floppy disk three or four times in the last six months, but the problem > continues. > > We host multiple servers and I make changes to the GNATBox about two to > four times a month. Sometimes the change is time critical and this > problem becomes a big annoyance. > > Our Remote GNATBox running 3.0.3 never has a problem. > > I am wondering if any of the following could be the cause this problem > and if any of you have similar experience and have a solution. > > 1. Bad or dirty floppy drive (the PC that runs GNATBOX is about 4 years > old) 2. To much traffic during the save changes function. (I doubt this) > > 3. Corrupted software. > > I am guessing we have a failing floppy drive. > > > I have read the mail to this list for two years and have learned a lot > for you all. Thanks to everyone! > --------------------- > Tom Sparks > Network Administrator > POP! Multimedia > > 206.728.7997 tel > 206.728.1144 fax > www.popmultimedia.com > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > To subscribe to the digest version first unsubscribe, then > e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED]
