You need routes on the GB-1000, Nortel and the ROBOX to have full visibility across all nets.
It's been a while so I may be off on this. If the gateways listed do not work, try using the internal NIC ip of each box (respectively) instead. Route 1 (routes added to GB-1000 config) Network 192.168.71.0 Gateway 207.xxx.xxx.13 (or IP of 192.168.1.0 lan NIC) Network 10.150.4.0 Gateway 207.xxx.xxx.13 (or IP of 192.168.1.0 lan NIC) Route 2 (routes added to ROBOX config) Network 192.168.1.0 Gateway 216.xxx.xxx.118 (or IP of 192.168.71.0 lan NIC) Network 10.150.4.0 Gateway 216.xxx.xxx.118 (or IP of 192.168.71.0 lan NIC) Route 3 (routes added to Nortel config) Network 192.168.1.0 Gateway 64.xxx.xxx.xxx (or IP of 10.150.4.0 lan NIC) Network 192.168.71.0 Gateway 64.xxx.xxx.xxx (or IP of 10.150.4.0 lan NIC) This config assumes your wan is a Y config with the GB-1000 being the primary leg. Everyone, PLEASE correct me if I am wrong. Danny -----Original Message----- From: Rick Jones [mailto:[EMAIL PROTECTED]] Sent: Friday, February 07, 2003 9:46 AM To: [EMAIL PROTECTED] Subject: [gb-users] vpn connection Hi, i need some help with a connection. i am really just a pc tech that has graduated into a network tech. i am learning this stuff as i go. i have an office with a gb1000 and an office with a robox. configuration is like this... gb1000 external 207.xxx.xxx.13 internal 192.168.1.0 gateway 207.xxx.xxx.9 robox external 216.xxx.xxx.118 internal 192.168.71.0 gateway 216.xxx.xxx.65 i have a vpn between them. i also have a vpn between the gb1000 and a third office that uses a nortel contivity 600. nortel config external 64.xxx.xxx.xxx internal 10.150.4.0 i would like the robox office to be able to communicate with the nortel office. how do i go about this? i have set up a static route on the robox for 10.150.4.0 what should i use as the gateway for that route? any help would be GREAT! Thanks Rick Richard A. Jones Technical Support Specialist RISI 4 Alfred Circle. Bedford, MA. 01730-2794 (781)271-0030 ext. 33 [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] To subscribe to the digest version first unsubscribe, then e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archive of the last 1000 messages: http://www.mail-archive.com/[email protected] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] To subscribe to the digest version first unsubscribe, then e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archive of the last 1000 messages: http://www.mail-archive.com/[email protected]
