I was upgrading from 3.2.5 to 3.3.4 and I only had the 3 default VPN objects after the upgrade. I copied/pasted new instances of the default objects Ike, manual, and mobile (with new names) and it seems to be working now.
The decoded registration codes say: GB-1000 3.3 - Registered GB-1000 3.3 - VPN (7 clients) -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, July 15, 2003 9:32 AM To: [EMAIL PROTECTED] Subject: RE: [gb-users] Probably a simple VPN question First question would be, what version did you upgrade from? The second question would be what exactly the text description of the decoded registration code says. Mike Burden Lynk Systems http://www.lynk.com (616)532-4985 [EMAIL PROTECTED] > -----Original Message----- > From: Richard Ashley [mailto:[EMAIL PROTECTED] > Sent: Monday, July 14, 2003 4:58 PM > To: [EMAIL PROTECTED] > Subject: [gb-users] Probably a simple VPN question > > > I have a GB-1000 that I recently upgraded to 3.3.4, with the > registration code for 7 VPN clients installed successfully. > Unfortunately, now the firewall is only allowing one VPN > client to connect at a time. Assuming the 7 client license > has been installed correctly, what else might be causing this > to happen? > > ------------------------------------------------------ > To unsubscribe: [EMAIL PROTECTED] > For additional commands: [EMAIL PROTECTED] > Archive: http://www.mail-archive.com/[EMAIL PROTECTED] ------------------------------------------------------ To unsubscribe: [EMAIL PROTECTED] For additional commands: [EMAIL PROTECTED] Archive: http://www.mail-archive.com/[EMAIL PROTECTED] ------------------------------------------------------ To unsubscribe: [EMAIL PROTECTED] For additional commands: [EMAIL PROTECTED] Archive: http://www.mail-archive.com/[EMAIL PROTECTED]
