I have exactly this configuration. Use HA-EXT as the Address for the GB-1000 end of the VPN. Everything else is configured the same as if you were using a single GB-1000.
Mike Burden Lynk Systems http://www.lynk.com (616)532-4985 [EMAIL PROTECTED] > -----Original Message----- > From: Phil Dye [mailto:[EMAIL PROTECTED] > Sent: Thursday, August 28, 2003 8:18 AM > To: [EMAIL PROTECTED] > Subject: [gb-users] VPN with HA > > > Before I start experimenting, and screw up what I *do* have > working, can anyone tell me if it's possible to have a VPN > between a GB-Flash and a GB1000 HA pair, or can I only do so > to one of the GB1000's? > > If not, then I presume (and have this working already) that > if my chosen half of the HA pair goes down, so does my VPN to > the remote site? > > -- > Phil Dye, Technical Services Manager > A L C H E M Y D I G I T A L > Tel: +44 (0)23 8021 3400 > http://www.alchemydigital.com/ > > ------------------------------------------------------ > To unsubscribe: [EMAIL PROTECTED] > For additional commands: [EMAIL PROTECTED] > Archive: http://www.mail-archive.com/[EMAIL PROTECTED] ------------------------------------------------------ To unsubscribe: [EMAIL PROTECTED] For additional commands: [EMAIL PROTECTED] Archive: http://www.mail-archive.com/[EMAIL PROTECTED]
