Simple, Create rules (remote access) that allow a pre-determined ip range to access the DMZ from the Protected range.
Setup DHCP to either dish out this range to VPN clients, or exceptions from DHCP so they can be hard set for the VPN clients. This way only, allowed systems can gain access to DMZ environment. Danny -----Original Message----- From: Curtis Muncy [mailto:[EMAIL PROTECTED] Sent: Monday, November 24, 2003 11:37 AM To: [EMAIL PROTECTED] Subject: FW: [gb-users] VPN to remote network with DMZ No ideas at all!! -----Original Message----- From: Curtis Muncy Sent: Friday, November 21, 2003 12:26 AM To: [EMAIL PROTECTED] Subject: [gb-users] VPN to remote network with DMZ Setting up a VPN, have a single network at my end behind a GB-1000, need to connect to a Firebox that has a protected network and a DMZ, therefore I need to be able to get to two networks through the single VPN. The Firebox on the other end is handling all the routing between the protected and DMZ network. I created an object and placed both network definitions in it, then used this object to define the remote network in the VPN authorization and the pass through filters. I can get to the protected, but not the DMZ. Has anyone been able to route to two different networks like this? This seems like it would be a common tasks. Any help would be appreciated. Curtis Muncy Senior IT Manager, Catapult Systems ------------------------------------------------------ To unsubscribe: [EMAIL PROTECTED] For additional commands: [EMAIL PROTECTED] Archive: http://archives.gnatbox.com/gb-users/ ------------------------------------------------------ To unsubscribe: [EMAIL PROTECTED] For additional commands: [EMAIL PROTECTED] Archive: http://archives.gnatbox.com/gb-users/ ------------------------------------------------------ To unsubscribe: [EMAIL PROTECTED] For additional commands: [EMAIL PROTECTED] Archive: http://archives.gnatbox.com/gb-users/
