On Mon, 24 May 2004, Mike Benedict wrote: > We're just getting started trying to install the new 3.5 on the 64Mb flash > cards and have run into a problem. It seems that Tyan motherboards don't > want to boot from the flash card. Other systems, including a very old > Gigabyte board boot just fine, but neither a Tyan 2668 or a Tyan GS10 would > boot. We really wanted to use the Tyan GS10 as it comes in a nice 1U > chassis and is inexpensive. Anybody run into this or have a suggestion?
Where does it fail? Does it just stop at the 1/2 Slice prompt? If so, see Troubleshooting #17 in the GB-Ware install/product guide: http://www.gta.com/downloads/external/productGuide/GB-Ware_Guide.pdf If it's not that...more detail would help. (and, since this is a new product, the support department at [EMAIL PROTECTED] might be a good option) Does the BIOS recognize the flash adaptor and card as an IDE disk? -- David Raistrick Systems Administrator - Global Technology Associates, Inc [EMAIL PROTECTED] Disclaimer: All opinions expressed are the opinions of David Raistrick, not necessarily those of GTA, Inc. ------------------------------------------------------ To unsubscribe: [EMAIL PROTECTED] For additional commands: [EMAIL PROTECTED] Archive: http://archives.gnatbox.com/gb-users/
