Chris,
If you are using PPPoE to negotiate the connection. The firewall
should get assigned one IP and you should be able to add the
additional IP addresses as aliases on the firewall.
David
At 11:04 AM 5/13/2006, you wrote:
I've set up a ton of GTA units on SBC DSL Static lines, but in all
cases the DSL was delivered with a netopia which was routing the connection.
I am upgrading a customer's DSL to static and do not currently have
the netopia. In order to get the IP assignments I have to convert
the SpeedStream 5100 to bridge mode and enable the PPPoE client on
the firewall. I've researched PPPoE clients a bit on the net,
particularly related to FreeBSD, and it appears that if I do this
the server will hand down all of the IP addresses to the
firewall. Will the GB-Ware (4.0) receive and allow me to use all of
the IP's assigned via the PPPoE client? Will they appear as
interfaces just as if I had added them as aliases? I am about to
give up and just order a Netopia from Bell, but I'd like to give
this a try in the meantime.
Anyone?
Chris Green
------------------------------------------------------
To unsubscribe: [EMAIL PROTECTED]
For additional commands: [EMAIL PROTECTED]
Archive: http://archives.gnatbox.com/gb-users/
------------------------------------------------------
To unsubscribe: [EMAIL PROTECTED]
For additional commands: [EMAIL PROTECTED]
Archive: http://archives.gnatbox.com/gb-users/
