This patch moves gthr*.h and related code to toplevel libgcc. Unlike
the other outstanding patches (libgcc1, libgcc2, crtstuff, shlib), it is
pretty independent from the rest, so I'm posting it first. It was
developed last, so there may be conflicts (gcc/Makefile.in). It also
depends on the posix95 removal patch.
Instead of cluttering the libgcc directory, all non-generic gthr-*.h
files were moved to their respecitive positions in libgcc/config. The
patch simplifies gthr.h quite a bit:
* It does away with the need for thread-specific defines:
** HAVE_GTHR_DEFAULT is removed, instead I always create gthr-default.h,
even if only as a link to gthr-single.h. That simplifies the calling
runtime libs which don't need to re-determine that value.
** There's no need to treat gthr-tpf.h specially: tpf is the
only/default model on s390x-ibm-tpf*, so this can be handled by the
default case.
** The use of _PTHREADS to select gthr-posix.h is quite inconsistent:
only a few targets define that macro (m32r/linux.h, mn10300/linux.h,
netbsd.h, sh/linux.h, sol2.h), and none of them support alternative
thread models. Given that everything works fine for every other
Linux target suggests that this can go.
** _DCE_THREADS is used to select gthr-dce.h, but again dce is the
only/default model on hppa[12]*-*-hpux10* (pa-hpux10.h), so the
special-casing can be removed.
** Since gthr-default.h points to gthr-single.h if nothing else, that
explicit fallback can be removed.
I noticed that config/t-vxworks installs gthr-vxworks.h, gthr-default.h
via EXTRA_HEADERS, but the comment suggests this is only for the benefit
of the runtime libs which know how to find them, so I've removed that.
The gthr*.h headers have GCC_GTHR_* guards right now. With the move,
one might want to change them to LIBGCC_GTHR_*. If so, one needs to adapt
libstdc++-v3/include/Makefile.am. I haven't touched this yet.
The target libraries using gthr.h (libgfortran, libobjc, libstdc++-v3)
need to be adapted to search both libgcc source (for gthr.h etc.) and
build (for gthr-default.h) directories.
I haven't moved two macros used in gthr*.h yet: GTHREAD_USE_WEAK and
SUPPORTS_WEAK. This seems to warrant a separate followup patch, but for
the record I report my findings:
* GTHREAD_USE_WEAK must be defined explicitly. It needs to be poisoned
in system.h after the move. Right now, only a few targets defined a
non-default value:
darwin.h #define GTHREAD_USE_WEAK 0
i386/cygwin.h #define GTHREAD_USE_WEAK 0
ia64/hpux.h #define GTHREAD_USE_WEAK 0
pa/pa64-hpux.h #define GTHREAD_USE_WEAK 0
pa/som.h #define GTHREAD_USE_WEAK 0
The last 3 could be handled in a new hpux-lib.h, but perhaps this
isn't necessary if ax_sys_weak_alias.m4 works.
* SUPPORTS_WEAK is probably best detected with autoconf. We have
libgfortran/acinclude.m4 (LIBGFOR_GTHREAD_WEAK), but should probably
go for m4/ax_sys_weak_alias.m4 from the autoconf-archive instead. If
we're lucky, that macro can detect support for weak definitions and
replace both SUPPORTS_WEAK and GTHREAD_USE_WEAK.
We have only 2 non-default definitions right now:
config/avr/avr.h #define SUPPORTS_WEAK 1
config/cris/cris.h #define SUPPORTS_WEAK 1
I have no idea why they are made explicit; both are already correct
from the default in elfos.h (ASM_WEAKEN_LABEL) from what I can see.
A really ugly point in the gthr.h interface is that all users need to
define SUPPORTS_WEAK and GTHREAD_USE_WEAK themselves. It would be far
better to substitute the result of such a test into gthr.h to avoid
this complication.
Currently, this is handled quite inconsistently: libobjc does nothing,
libstdc++-v3/acinclude.m4 (GLIBCXX_CHECK_GTHREADS) hardcodes
SUPPORTS_WEAK, GTHREAD_USE_WEAK for posix threads, and
libgfortran/acinclude.m4 (LIBGFOR_GTHREAD_WEAK) tries to determine a
sensible value.
As I said, I'd like to handle this aspect in a followup patch and keep
the build part separate.
This patch was bootstrapped without regressions on i386-pc-solaris2.10
and i386-pc-solaris2.11. It probably needs more testing on other
non-posix platforms.
Comments?
Thanks.
Rainer
2011-08-06 Rainer Orth <r...@cebitec.uni-bielefeld.de>
gcc:
* gthr-posix.h, gthr-single.h, gthr.h: Move to ../libgcc.
* gthr-aix.h: Move to ../libgcc/config/rs6000.
* gthr-dce.h: Move to ../libgcc/config/pa.
* gthr-lynx.h: Move to ../libgcc/config.
* gthr-mipssde.h: Move to ../libgcc/config/mips.
* gthr-rtems.h: Move to ../libgcc/config.
* gthr-tpf.h: Move to ../libgcc/config/s390.
* gthr-vxworks.h: Move to ../libgcc/config.
* gthr-win32.h: Move to ../libgcc/config/i386.
* configure.ac (gthread_flags): Remove
(gthr-default.h): Don't create.
(thread_file): Don't substitute.
* configure: Regenerate.
* Makefile.in (GCC_THREAD_FILE): Remove.
(GTHREAD_FLAGS): Remove.
(libgcc.mvars): Remove GTHREAD_FLAGS.
* config/m32r/linux.h (SUBTARGET_CPP_SPEC): Don't define _PTHREADS
if -pthread.
* config/mn10300/linux.h (CPP_SPEC): Likewise.
* config/netbsd.h (NETBSD_CPP_SPEC): Likewise.
* config/sh/linux.h (SUBTARGET_CPP_SPEC): Likewise.
* config/sol2.h (CPP_SUBTARGET_SPEC): Likewise.
* config/pa/pa-hpux10.h (CPP_SPEC): Don't define _DCE_THREADS if
-threads.
* config/t-vxworks (EXTRA_HEADERS): Remove.
gcc/po:
* EXCLUDES (gthr-aix.h, gthr-dce.h, gthr-posix.c, gthr-posix.h)
(gthr-rtems.h, gthr-single.h, gthr-solaris.h, gthr-vxworks.h)
(gthr-win32.h, gthr.h): Remove.
libgcc:
* gthr-posix.h, gthr-single.h, gthr.h: New files.
* config/gthr-lynx.h, config/gthr-rtems.h, config/gthr-vxworks.h,
config/i386/gthr-win32.h, config/mips/gthr-mipssde.h,
config/pa/gthr-dce.h, config/rs6000/gthr-aix.h,
config/s390/gthr-tpf.h: New files.
* config/i386/gthr-win32.c: Include "gthr-win32.h".
* config.host (thread_header, thread_dir): New variables.
Set it depending on target_thread_file.
* configure.ac (gthr-default.h): Link from $thread_header.
* configure: Regenerate.
* Makefile.in (LIBGCC2_CFLAGS): Remove $(GTHREAD_FLAGS).
libgfortran:
* Makefile.am (AM_CPPFLAGS): Add
-I$(srcdir)/$(MULTISRCTOP)../libgcc, -I$(MULTIBUILDTOP)../libgcc.
* Makefile.in: Regenerate.
* acinclude.m4 (LIBGFOR_CHECK_GTHR_DEFAULT): Remove.
* configure.ac (LIBGFOR_CHECK_GTHR_DEFAULT): Likewise.
* configure: Regenerate.
* config.h.in: Regenerate.
libobjc:
* Makefile.in (INCLUDES): Add -I$(MULTIBUILDTOP)../libgcc.
* configure.ac (target_thread_file, HAVE_GTHR_DEFAULT): Remove.
* configure: Regenerate.
* config.h.in: Regenerate.
libstdc++-v3:
* acinclude.m4 (GLIBCXX_CONFIGURE): Determine and substitute
toplevel_builddir.
(GLIBCXX_ENABLE_THREADS): Remove glibcxx_thread_h,
HAVE_GTHR_DEFAULT, enable_thread.
(GLIBCXX_CHECK_GTHREADS): Reflect gthr move to libgcc.
* include/Makefile.am (thread_host_headers): Remove
${host_builddir}/gthr-tpf.h.
(${host_builddir}/gthr.h): Reflect gthr move to libgcc.
Use $<.
(${host_builddir}/gthr-single.h): Likewise.
(${host_builddir}/gthr-posix.h): Likewise.
(${host_builddir}/gthr-tpf.h): Remove.
(${host_builddir}/gthr-default.h): Likewise.
* configure, config.h.in: Regenerate.
* Makefile.in, doc/Makefile.in, include/Makefile.in,
libsupc++/Makefile.in, po/Makefile.in, python/Makefile.in,
src/Makefile.intestsuite/Makefile.in: Regenerate.
diff --git a/gcc/Makefile.in b/gcc/Makefile.in
--- a/gcc/Makefile.in
+++ b/gcc/Makefile.in
@@ -527,9 +527,7 @@ lang_opt_files=@lang_opt_files@ $(srcdir
lang_specs_files=@lang_specs_files@
lang_tree_files=@lang_tree_files@
target_cpu_default=@target_cpu_default@
-GCC_THREAD_FILE=@thread_file@
OBJC_BOEHM_GC=@objc_boehm_gc@
-GTHREAD_FLAGS=@gthread_flags@
extra_modes_file=@extra_modes_file@
extra_opt_files=@extra_opt_files@
host_hook_obj=@out_host_hook_obj@
@@ -1784,7 +1782,6 @@ libgcc-support: libgcc.mvars stmp-int-hd
libgcc.mvars: config.status Makefile specs xgcc$(exeext)
: > tmp-libgcc.mvars
echo GCC_CFLAGS = '$(GCC_CFLAGS)' >> tmp-libgcc.mvars
- echo GTHREAD_FLAGS = '$(GTHREAD_FLAGS)' >> tmp-libgcc.mvars
echo INHIBIT_LIBC_CFLAGS = '$(INHIBIT_LIBC_CFLAGS)' >> tmp-libgcc.mvars
echo TARGET_SYSTEM_ROOT = '$(TARGET_SYSTEM_ROOT)' >> tmp-libgcc.mvars
diff --git a/gcc/config/m32r/linux.h b/gcc/config/m32r/linux.h
--- a/gcc/config/m32r/linux.h
+++ b/gcc/config/m32r/linux.h
@@ -84,7 +84,7 @@
#undef SUBTARGET_CPP_SPEC
#define SUBTARGET_CPP_SPEC "\
%{posix:-D_POSIX_SOURCE} \
- %{pthread:-D_REENTRANT -D_PTHREADS} \
+ %{pthread:-D_REENTRANT} \
"
#define TARGET_OS_CPP_BUILTINS() GNU_USER_TARGET_OS_CPP_BUILTINS()
diff --git a/gcc/config/mn10300/linux.h b/gcc/config/mn10300/linux.h
--- a/gcc/config/mn10300/linux.h
+++ b/gcc/config/mn10300/linux.h
@@ -28,7 +28,7 @@
#undef CPP_SPEC
#define CPP_SPEC "%{mam33:-D__AM33__} %{!mam33:-D__AM33__=2 -D__AM33_2__} \
%{posix:-D_POSIX_SOURCE} \
- %{pthread:-D_REENTRANT -D_PTHREADS}"
+ %{pthread:-D_REENTRANT}"
#undef ASM_SPEC
#define ASM_SPEC ""
diff --git a/gcc/config/netbsd.h b/gcc/config/netbsd.h
--- a/gcc/config/netbsd.h
+++ b/gcc/config/netbsd.h
@@ -33,7 +33,7 @@ along with GCC; see the file COPYING3.
/* CPP_SPEC parts common to all NetBSD targets. */
#define NETBSD_CPP_SPEC \
"%{posix:-D_POSIX_SOURCE} \
- %{pthread:-D_REENTRANT -D_PTHREADS}"
+ %{pthread:-D_REENTRANT}"
/* NETBSD_NATIVE is defined when gcc is integrated into the NetBSD
source tree so it can be configured appropriately without using
diff --git a/gcc/config/pa/pa-hpux10.h b/gcc/config/pa/pa-hpux10.h
--- a/gcc/config/pa/pa-hpux10.h
+++ b/gcc/config/pa/pa-hpux10.h
@@ -1,6 +1,6 @@
/* Definitions of target machine for GNU compiler, for HP PA-RISC
Copyright (C) 1995, 1996, 1997, 2000, 2001, 2002, 2003, 2004,
- 2007, 2008, 2010 Free Software Foundation, Inc.
+ 2007, 2008, 2010, 2011 Free Software Foundation, Inc.
Contributed by Tim Moore (mo...@defmacro.cs.utah.edu)
This file is part of GCC.
@@ -77,7 +77,7 @@ along with GCC; see the file COPYING3.
} \
while (0)
-#define CPP_SPEC "%{threads: -D_REENTRANT -D_DCE_THREADS}"
+#define CPP_SPEC "%{threads: -D_REENTRANT}"
/* We can debug dynamically linked executables on hpux9; we also want
dereferencing of a NULL pointer to cause a SEGV. */
diff --git a/gcc/config/sh/linux.h b/gcc/config/sh/linux.h
--- a/gcc/config/sh/linux.h
+++ b/gcc/config/sh/linux.h
@@ -28,7 +28,7 @@ along with GCC; see the file COPYING3.
#undef SUBTARGET_CPP_SPEC
#define SUBTARGET_CPP_SPEC "\
%{posix:-D_POSIX_SOURCE} \
- %{pthread:-D_REENTRANT -D_PTHREADS} \
+ %{pthread:-D_REENTRANT} \
"
#define TARGET_OS_CPP_BUILTINS() \
diff --git a/gcc/config/sol2.h b/gcc/config/sol2.h
--- a/gcc/config/sol2.h
+++ b/gcc/config/sol2.h
@@ -72,8 +72,7 @@ along with GCC; see the file COPYING3.
#define UINTPTR_TYPE (LONG_TYPE_SIZE == 64 ? "long unsigned int" : "unsigned
int")
#undef CPP_SUBTARGET_SPEC
-#define CPP_SUBTARGET_SPEC "\
-%{pthreads|pthread:-D_REENTRANT -D_PTHREADS}"
+#define CPP_SUBTARGET_SPEC "%{pthreads|pthread:-D_REENTRANT}"
/* Names to predefine in the preprocessor for this target machine. */
#define TARGET_SUB_OS_CPP_BUILTINS()
diff --git a/gcc/config/t-vxworks b/gcc/config/t-vxworks
--- a/gcc/config/t-vxworks
+++ b/gcc/config/t-vxworks
@@ -17,10 +17,6 @@
# along with GCC; see the file COPYING3. If not see
# <http://www.gnu.org/licenses/>.
-# Some runtime modules need these. Can't set extra_headers in config.gcc
-# because the paths are always made absolute to the cpu config dir.
-EXTRA_HEADERS += $(srcdir)/gthr-vxworks.h gthr-default.h
-
# Both the kernel and RTP headers provide limits.h.
LIMITS_H_TEST = true
diff --git a/gcc/configure.ac b/gcc/configure.ac
--- a/gcc/configure.ac
+++ b/gcc/configure.ac
@@ -1370,19 +1370,6 @@ if test x${thread_file} = x; then
thread_file=${target_thread_file}
fi
-# Make gthr-default.h if we have a thread file.
-gthread_flags=
-if test $thread_file != single; then
- echo "#include \"gthr-${thread_file}.h\"" > gthr-default.h-t
- if diff gthr-default.h-t gthr-default.h 2>/dev/null; then
- rm -f gthr-default.h-t
- else
- mv -f gthr-default.h-t gthr-default.h
- fi
- gthread_flags=-DHAVE_GTHR_DEFAULT
-fi
-AC_SUBST(gthread_flags)
-
# --------
# UNSORTED
# --------
@@ -4883,7 +4870,6 @@ AC_SUBST(out_file)
AC_SUBST(out_object_file)
AC_SUBST(common_out_file)
AC_SUBST(common_out_object_file)
-AC_SUBST(thread_file)
AC_SUBST(tm_file_list)
AC_SUBST(tm_include_list)
AC_SUBST(tm_defines)
diff --git a/gcc/po/EXCLUDES b/gcc/po/EXCLUDES
--- a/gcc/po/EXCLUDES
+++ b/gcc/po/EXCLUDES
@@ -24,16 +24,6 @@
# These files are part of libgcc, or target headers provided by gcc.
gcov-io.h
gcov-iov.c
-gthr-aix.h
-gthr-dce.h
-gthr-posix.c
-gthr-posix.h
-gthr-rtems.h
-gthr-single.h
-gthr-solaris.h
-gthr-vxworks.h
-gthr-win32.h
-gthr.h
limitx.h
limity.h
diff --git a/libgcc/Makefile.in b/libgcc/Makefile.in
--- a/libgcc/Makefile.in
+++ b/libgcc/Makefile.in
@@ -223,8 +223,7 @@ endif
#
LIBGCC2_DEBUG_CFLAGS = -g
LIBGCC2_CFLAGS = -O2 $(LIBGCC2_INCLUDES) $(GCC_CFLAGS) $(HOST_LIBGCC2_CFLAGS) \
- $(LIBGCC2_DEBUG_CFLAGS) $(GTHREAD_FLAGS) \
- -DIN_LIBGCC2 \
+ $(LIBGCC2_DEBUG_CFLAGS) -DIN_LIBGCC2 \
-fbuilding-libgcc -fno-stack-protector \
$(INHIBIT_LIBC_CFLAGS)
diff --git a/libgcc/config.host b/libgcc/config.host
--- a/libgcc/config.host
+++ b/libgcc/config.host
@@ -64,6 +64,7 @@
# built for the target, not the host. These files
# are relative to $srcdir/config and must not have
# the same names as files in $srcdir/../gcc/config.
+# thread_header The name of the header file for the thread model used.
# unwind_header The name of the header file declaring the unwind
# runtime interface routines.
@@ -72,6 +73,7 @@ enable_execute_stack=
extra_parts=
tmake_file=
tm_file=
+thread_header=
md_unwind_header=no-unwind.h
unwind_header=unwind-generic.h
@@ -283,6 +285,38 @@ i[34567]86-*-mingw* | x86_64-*-mingw*)
;;
esac
+# Map from thread model to thread header.
+thread_dir=
+case $target_thread_file in
+ aix)
+ thread_dir=config/rs6000/
+ ;;
+ dce)
+ thread_dir=config/pa/
+ ;;
+ lynx)
+ thread_dir=config/
+ ;;
+ mipssde)
+ thread_dir=config/mips/
+ ;;
+ posix | single)
+ ;;
+ rtems)
+ thread_dir=config/
+ ;;
+ tpf)
+ thread_dir=config/s390/
+ ;;
+ vxworks)
+ thread_dir=config/
+ ;;
+ win32)
+ thread_dir=config/i386/
+ ;;
+esac
+thread_header=${thread_dir}gthr-${target_thread_file}.h
+
case ${host} in
alpha*-*-linux*)
tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee t-crtfm
alpha/t-linux"
diff --git a/gcc/gthr-lynx.h b/libgcc/config/gthr-lynx.h
rename from gcc/gthr-lynx.h
rename to libgcc/config/gthr-lynx.h
diff --git a/gcc/gthr-rtems.h b/libgcc/config/gthr-rtems.h
rename from gcc/gthr-rtems.h
rename to libgcc/config/gthr-rtems.h
diff --git a/gcc/gthr-vxworks.h b/libgcc/config/gthr-vxworks.h
rename from gcc/gthr-vxworks.h
rename to libgcc/config/gthr-vxworks.h
diff --git a/libgcc/config/i386/gthr-win32.c b/libgcc/config/i386/gthr-win32.c
--- a/libgcc/config/i386/gthr-win32.c
+++ b/libgcc/config/i386/gthr-win32.c
@@ -1,7 +1,8 @@
/* Implementation of W32-specific threads compatibility routines for
libgcc2. */
-/* Copyright (C) 1999, 2000, 2002, 2004, 2008, 2009 Free Software Foundation,
Inc.
+/* Copyright (C) 1999, 2000, 2002, 2004, 2008, 2009, 2011
+ Free Software Foundation, Inc.
Contributed by Mumit Khan <k...@xraylith.wisc.edu>.
Modified and moved to separate file by Danny Smith
<dannysm...@users.sourceforge.net>.
@@ -33,7 +34,7 @@ see the files COPYING3 and COPYING.RUNTI
#endif
#undef __GTHREAD_I486_INLINE_LOCK_PRIMITIVES
#define __GTHREAD_I486_INLINE_LOCK_PRIMITIVES
-#include <gthr-win32.h>
+#include "gthr-win32.h"
/* Windows32 threads specific definitions. The windows32 threading model
does not map well into pthread-inspired gcc's threading model, and so
diff --git a/gcc/gthr-win32.h b/libgcc/config/i386/gthr-win32.h
rename from gcc/gthr-win32.h
rename to libgcc/config/i386/gthr-win32.h
diff --git a/gcc/gthr-mipssde.h b/libgcc/config/mips/gthr-mipssde.h
rename from gcc/gthr-mipssde.h
rename to libgcc/config/mips/gthr-mipssde.h
diff --git a/gcc/gthr-dce.h b/libgcc/config/pa/gthr-dce.h
rename from gcc/gthr-dce.h
rename to libgcc/config/pa/gthr-dce.h
--- a/gcc/gthr-dce.h
+++ b/libgcc/config/pa/gthr-dce.h
@@ -1,6 +1,6 @@
/* Threads compatibility routines for libgcc2 and libobjc. */
/* Compile this one with gcc. */
-/* Copyright (C) 1997, 1999, 2000, 2001, 2004, 2005, 2008, 2009
+/* Copyright (C) 1997, 1999, 2000, 2001, 2004, 2005, 2008, 2009, 2011
Free Software Foundation, Inc.
This file is part of GCC.
@@ -27,10 +27,10 @@ see the files COPYING3 and COPYING.RUNTI
#ifndef GCC_GTHR_DCE_H
#define GCC_GTHR_DCE_H
-/* If _DCE_THREADS is not defined, then we're building the single
+/* If _REENTRANT is not defined, then we're building the single
threaded version of the libraries and do not want to reference
anything related to pthreads or dce. */
-#ifndef _DCE_THREADS
+#ifndef _REENTRANT
#include "gthr-single.h"
#else
/* DCE threads interface.
diff --git a/gcc/gthr-aix.h b/libgcc/config/rs6000/gthr-aix.h
rename from gcc/gthr-aix.h
rename to libgcc/config/rs6000/gthr-aix.h
diff --git a/gcc/gthr-tpf.h b/libgcc/config/s390/gthr-tpf.h
rename from gcc/gthr-tpf.h
rename to libgcc/config/s390/gthr-tpf.h
diff --git a/libgcc/configure.ac b/libgcc/configure.ac
--- a/libgcc/configure.ac
+++ b/libgcc/configure.ac
@@ -361,6 +361,7 @@ AC_CONFIG_LINKS([enable-execute-stack.c:
AC_CONFIG_LINKS([unwind.h:$unwind_header])
AC_CONFIG_LINKS([md-unwind-support.h:config/$md_unwind_header])
AC_CONFIG_LINKS([sfp-machine.h:config/$sfp_machine_header])
+AC_CONFIG_LINKS([gthr-default.h:$thread_header])
# We need multilib support.
AC_CONFIG_FILES([Makefile])
diff --git a/gcc/gthr-posix.h b/libgcc/gthr-posix.h
rename from gcc/gthr-posix.h
rename to libgcc/gthr-posix.h
diff --git a/gcc/gthr-single.h b/libgcc/gthr-single.h
rename from gcc/gthr-single.h
rename to libgcc/gthr-single.h
diff --git a/gcc/gthr.h b/libgcc/gthr.h
rename from gcc/gthr.h
rename to libgcc/gthr.h
--- a/gcc/gthr.h
+++ b/libgcc/gthr.h
@@ -132,23 +132,8 @@ see the files COPYING3 and COPYING.RUNTI
__gthread_recursive_mutex_t
*mutex,
const __gthread_time_t *abs_time)
- Currently supported threads packages are
- TPF threads with -D__tpf__
- POSIX/Unix98 threads with -D_PTHREADS
- DCE threads with -D_DCE_THREADS
-
*/
-/* Check first for thread specific defines. */
-#if defined (__tpf__)
-#include "gthr-tpf.h"
-#elif _PTHREADS
-#include "gthr-posix.h"
-#elif _DCE_THREADS
-#include "gthr-dce.h"
-
-/* Include GTHREAD_FILE if one is defined. */
-#elif defined(HAVE_GTHR_DEFAULT)
#if SUPPORTS_WEAK
#ifndef GTHREAD_USE_WEAK
#define GTHREAD_USE_WEAK 1
@@ -156,11 +141,6 @@ see the files COPYING3 and COPYING.RUNTI
#endif
#include "gthr-default.h"
-/* Fallback to single thread definitions. */
-#else
-#include "gthr-single.h"
-#endif
-
#ifndef HIDE_EXPORTS
#pragma GCC visibility pop
#endif
diff --git a/libgfortran/Makefile.am b/libgfortran/Makefile.am
--- a/libgfortran/Makefile.am
+++ b/libgfortran/Makefile.am
@@ -56,7 +56,9 @@ libcaf_single_la_LINK = $(LINK) $(libcaf
## use -iquote
AM_CPPFLAGS = -iquote$(srcdir)/io -I$(srcdir)/$(MULTISRCTOP)../gcc \
-I$(srcdir)/$(MULTISRCTOP)../gcc/config $(LIBQUADINCLUDE) \
- -I$(MULTIBUILDTOP)../../$(host_subdir)/gcc
+ -I$(MULTIBUILDTOP)../../$(host_subdir)/gcc \
+ -I$(srcdir)/$(MULTISRCTOP)../libgcc \
+ -I$(MULTIBUILDTOP)../libgcc
# Fortran rules for complex multiplication and division
AM_CFLAGS += -fcx-fortran-rules
diff --git a/libgfortran/acinclude.m4 b/libgfortran/acinclude.m4
--- a/libgfortran/acinclude.m4
+++ b/libgfortran/acinclude.m4
@@ -83,17 +83,6 @@ if (foovar > 10) return __sync_add_and_f
[Define to 1 if the target supports __sync_fetch_and_add])
fi])
-dnl Check if threads are supported.
-AC_DEFUN([LIBGFOR_CHECK_GTHR_DEFAULT], [
- AC_CACHE_CHECK([configured target thread model],
- libgfor_cv_target_thread_file, [
-libgfor_cv_target_thread_file=`$CC -v 2>&1 | sed -n 's/^Thread model: //p'`])
-
- if test $libgfor_cv_target_thread_file != single; then
- AC_DEFINE(HAVE_GTHR_DEFAULT, 1,
- [Define if the compiler has a thread header that is non single.])
- fi])
-
dnl Check for pragma weak.
AC_DEFUN([LIBGFOR_GTHREAD_WEAK], [
AC_CACHE_CHECK([whether pragma weak works],
diff --git a/libgfortran/configure.ac b/libgfortran/configure.ac
--- a/libgfortran/configure.ac
+++ b/libgfortran/configure.ac
@@ -550,9 +550,6 @@ LIBGFOR_CHECK_ATTRIBUTE_ALIAS
# Check out sync builtins support.
LIBGFOR_CHECK_SYNC_FETCH_AND_ADD
-# Check out thread support.
-LIBGFOR_CHECK_GTHR_DEFAULT
-
# Check out #pragma weak.
LIBGFOR_GTHREAD_WEAK
diff --git a/libobjc/Makefile.in b/libobjc/Makefile.in
--- a/libobjc/Makefile.in
+++ b/libobjc/Makefile.in
@@ -102,6 +102,7 @@ INCLUDES = -I$(srcdir)/$(MULTISRCTOP)../
-I$(srcdir)/$(MULTISRCTOP)../gcc/config \
-I$(MULTIBUILDTOP)../../$(host_subdir)/gcc \
-I$(srcdir)/$(MULTISRCTOP)../libgcc \
+ -I$(MULTIBUILDTOP)../libgcc \
-I$(srcdir)/$(MULTISRCTOP)../include \
$(OBJC_BOEHM_GC_INCLUDES)
diff --git a/libobjc/configure.ac b/libobjc/configure.ac
--- a/libobjc/configure.ac
+++ b/libobjc/configure.ac
@@ -217,15 +217,6 @@ AC_CHECK_HEADERS(sched.h)
# Miscellanea
# -----------
-AC_MSG_CHECKING([for thread model used by GCC])
-target_thread_file=`$CC -v 2>&1 | sed -n 's/^Thread model: //p'`
-AC_MSG_RESULT([$target_thread_file])
-
-if test $target_thread_file != single; then
- AC_DEFINE(HAVE_GTHR_DEFAULT, 1,
- [Define if the compiler has a thread header that is non single.])
-fi
-
# Check if we have thread-local storage
GCC_CHECK_TLS
diff --git a/libstdc++-v3/acinclude.m4 b/libstdc++-v3/acinclude.m4
--- a/libstdc++-v3/acinclude.m4
+++ b/libstdc++-v3/acinclude.m4
@@ -35,6 +35,7 @@ dnl SUBDIRS
dnl Substs:
dnl glibcxx_builddir (absolute path)
dnl glibcxx_srcdir (absolute path)
+dnl toplevel_builddir (absolute path)
dnl toplevel_srcdir (absolute path)
dnl with_cross_host
dnl with_newlib
@@ -59,9 +60,11 @@ AC_DEFUN([GLIBCXX_CONFIGURE], [
[\\/$]* | ?:[\\/]*) glibcxx_srcdir=${srcdir} ;;
*) glibcxx_srcdir=`cd "$srcdir" && ${PWDCMD-pwd} || echo "$srcdir"` ;;
esac
+ toplevel_builddir=${glibcxx_builddir}/..
toplevel_srcdir=${glibcxx_srcdir}/..
AC_SUBST(glibcxx_builddir)
AC_SUBST(glibcxx_srcdir)
+ AC_SUBST(toplevel_builddir)
AC_SUBST(toplevel_srcdir)
# We use these options to decide which functions to include. They are
@@ -3132,34 +3135,10 @@ dnl having to write complex code (the se
dnl namespace are complex and fragile enough as it is). We must also
dnl add a relative path so that -I- is supported properly.
dnl
-dnl Substs:
-dnl glibcxx_thread_h
-dnl
-dnl Defines:
-dnl HAVE_GTHR_DEFAULT
-dnl
AC_DEFUN([GLIBCXX_ENABLE_THREADS], [
AC_MSG_CHECKING([for thread model used by GCC])
target_thread_file=`$CXX -v 2>&1 | sed -n 's/^Thread model: //p'`
AC_MSG_RESULT([$target_thread_file])
-
- if test $target_thread_file != single; then
- AC_DEFINE(HAVE_GTHR_DEFAULT, 1,
- [Define if gthr-default.h exists
- (meaning that threading support is enabled).])
- fi
-
- glibcxx_thread_h=gthr-$target_thread_file.h
-
- dnl Check for __GTHREADS define.
- gthread_file=${toplevel_srcdir}/gcc/${glibcxx_thread_h}
- if grep __GTHREADS $gthread_file >/dev/null 2>&1 ; then
- enable_thread=yes
- else
- enable_thread=no
- fi
-
- AC_SUBST(glibcxx_thread_h)
])
@@ -3173,7 +3152,8 @@ AC_DEFUN([GLIBCXX_CHECK_GTHREADS], [
AC_LANG_CPLUSPLUS
ac_save_CXXFLAGS="$CXXFLAGS"
- CXXFLAGS="$CXXFLAGS -fno-exceptions -I${toplevel_srcdir}/gcc"
+ CXXFLAGS="$CXXFLAGS -fno-exceptions \
+ -I${toplevel_srcdir}/libgcc -I${toplevel_builddir}/libgcc"
AC_MSG_CHECKING([check whether it can be safely assumed that mutex_timedlock
is available])
diff --git a/libstdc++-v3/include/Makefile.am b/libstdc++-v3/include/Makefile.am
--- a/libstdc++-v3/include/Makefile.am
+++ b/libstdc++-v3/include/Makefile.am
@@ -846,7 +846,6 @@ thread_host_headers = \
${host_builddir}/gthr.h \
${host_builddir}/gthr-single.h \
${host_builddir}/gthr-posix.h \
- ${host_builddir}/gthr-tpf.h \
${host_builddir}/gthr-default.h
@@ -1108,43 +1107,35 @@ endif
# Host includes for threads
uppercase = [ABCDEFGHIJKLMNOPQRSTUVWXYZ_]
-${host_builddir}/gthr.h: ${toplevel_srcdir}/gcc/gthr.h stamp-${host_alias}
+${host_builddir}/gthr.h: ${toplevel_srcdir}/libgcc/gthr.h stamp-${host_alias}
sed -e '/^#pragma/b' \
-e '/^#/s/\(${uppercase}${uppercase}*\)/_GLIBCXX_\1/g' \
-e 's/_GLIBCXX_SUPPORTS_WEAK/__GXX_WEAK__/g' \
-e 's,^#include "\(.*\)",#include <bits/\1>,g' \
- < ${toplevel_srcdir}/gcc/gthr.h > $@
+ < $< > $@
-${host_builddir}/gthr-single.h: ${toplevel_srcdir}/gcc/gthr-single.h \
+${host_builddir}/gthr-single.h: ${toplevel_srcdir}/libgcc/gthr-single.h \
stamp-${host_alias}
sed -e 's/\(UNUSED\)/_GLIBCXX_\1/g' \
-e 's/\(GCC${uppercase}*_H\)/_GLIBCXX_\1/g' \
- < ${toplevel_srcdir}/gcc/gthr-single.h > $@
+ < $< > $@
-${host_builddir}/gthr-posix.h: ${toplevel_srcdir}/gcc/gthr-posix.h \
+${host_builddir}/gthr-posix.h: ${toplevel_srcdir}/libgcc/gthr-posix.h \
stamp-${host_alias}
sed -e 's/\(UNUSED\)/_GLIBCXX_\1/g' \
-e 's/\(GCC${uppercase}*_H\)/_GLIBCXX_\1/g' \
-e 's/SUPPORTS_WEAK/__GXX_WEAK__/g' \
-e 's/\(${uppercase}*USE_WEAK\)/_GLIBCXX_\1/g' \
- < ${toplevel_srcdir}/gcc/gthr-posix.h > $@
+ < $< > $@
-${host_builddir}/gthr-tpf.h: ${toplevel_srcdir}/gcc/gthr-tpf.h \
- stamp-${host_alias}
- sed -e 's/\(UNUSED\)/_GLIBCXX_\1/g' \
- -e 's/\(GCC${uppercase}*_H\)/_GLIBCXX_\1/g' \
- -e 's/SUPPORTS_WEAK/__GXX_WEAK__/g' \
- -e 's/\(${uppercase}*USE_WEAK\)/_GLIBCXX_\1/g' \
- < ${toplevel_srcdir}/gcc/gthr-tpf.h > $@
-
-${host_builddir}/gthr-default.h: ${toplevel_srcdir}/gcc/${glibcxx_thread_h} \
+${host_builddir}/gthr-default.h: ${toplevel_builddir}/libgcc/gthr-default.h \
stamp-${host_alias}
sed -e 's/\(UNUSED\)/_GLIBCXX_\1/g' \
-e 's/\(GCC${uppercase}*_H\)/_GLIBCXX_\1/g' \
-e 's/SUPPORTS_WEAK/__GXX_WEAK__/g' \
-e 's/\(${uppercase}*USE_WEAK\)/_GLIBCXX_\1/g' \
-e 's,^#include "\(.*\)",#include <bits/\1>,g' \
- < ${toplevel_srcdir}/gcc/${glibcxx_thread_h} > $@
+ < $< > $@
# Build two precompiled C++ includes, stdc++.h.gch/*.gch
${pch1a_output}: ${allstamped} ${host_builddir}/c++config.h ${pch1_source}
--
-----------------------------------------------------------------------------
Rainer Orth, Center for Biotechnology, Bielefeld University
