On Thu, May 04, 2017 at 09:50:42AM +0100, Prakhar Bahuguna wrote:
<unnecessary bits snipped>
> >
> > Otherwise ok. Please respin and test with an armhf thumb32 bootstrap
> > and regression test run.
> >
> > regards
> > Ramana
>
> I've respun this patch with the suggested changes, along with a new changelog
> for docs:
And tested hopefully with a bootstrap and regression test run on armhf on
GNU/Linux ?
Ok if no regressions.
regards
Ramana
>
> doc/ChangeLog:
>
> 2017-01-11 Prakhar Bahuguna <prakhar.bahug...@arm.com>
> Andre Simoes Dias Vieira <andre.simoesdiasvie...@arm.com>
>
> * invoke.texi (-mpure-code): Change "ARMv7-M targets" for
> "M-profile targets with the MOVT instruction".
>
> --
>
> Prakhar Bahuguna
> From e0f62c9919ceb9cfc6b4cc49615fb7188ae50519 Mon Sep 17 00:00:00 2001
> From: Prakhar Bahuguna <prakhar.bahug...@arm.com>
> Date: Wed, 15 Mar 2017 10:25:03 +0000
> Subject: [PATCH] Enable Purecode for ARMv8-M Baseline.
>
> ---
> gcc/config/arm/arm.c | 78
> ++++++++++++++--------
> gcc/config/arm/arm.md | 6 +-
> gcc/doc/invoke.texi | 3 +-
> .../gcc.target/arm/pure-code/pure-code.exp | 5 +-
> 4 files changed, 58 insertions(+), 34 deletions(-)
>
> diff --git a/gcc/config/arm/arm.c b/gcc/config/arm/arm.c
> index 83914913433..e0a7cabcb2e 100644
> --- a/gcc/config/arm/arm.c
> +++ b/gcc/config/arm/arm.c
> @@ -2833,16 +2833,16 @@ arm_option_check_internal (struct gcc_options *opts)
> flag_pic = 0;
> }
>
> - /* We only support -mslow-flash-data on armv7-m targets. */
> - if (target_slow_flash_data
> - && ((!(arm_arch7 && !arm_arch_notm) && !arm_arch7em)
> - || (TARGET_THUMB1_P (flags) || flag_pic || TARGET_NEON)))
> - error ("-mslow-flash-data only supports non-pic code on armv7-m
> targets");
> -
> - /* We only support pure-code on Thumb-2 M-profile targets. */
> - if (target_pure_code
> - && (!arm_arch_thumb2 || arm_arch_notm || flag_pic || TARGET_NEON))
> - error ("-mpure-code only supports non-pic code on armv7-m targets");
> + /* We only support -mpure-code and -mslow-flash-data on M-profile targets
> + with MOVT. */
> + if ((target_pure_code || target_slow_flash_data)
> + && (!TARGET_HAVE_MOVT || arm_arch_notm || flag_pic || TARGET_NEON))
> + {
> + const char *flag = (target_pure_code ? "-mpure-code" :
> + "-mslow-flash-data");
> + error ("%s only supports non-pic code on M-profile targets with the "
> + "MOVT instruction", flag);
> + }
>
> }
>
> @@ -4077,7 +4077,7 @@ const_ok_for_arm (HOST_WIDE_INT i)
> || (i & ~0xfc000003) == 0))
> return TRUE;
> }
> - else
> + else if (TARGET_THUMB2)
> {
> HOST_WIDE_INT v;
>
> @@ -4093,6 +4093,14 @@ const_ok_for_arm (HOST_WIDE_INT i)
> if (i == v)
> return TRUE;
> }
> + else if (TARGET_HAVE_MOVT)
> + {
> + /* Thumb-1 Targets with MOVT. */
> + if (i > 0xffff)
> + return FALSE;
> + else
> + return TRUE;
> + }
>
> return FALSE;
> }
> @@ -7736,6 +7744,32 @@ arm_legitimate_address_outer_p (machine_mode mode, rtx
> x, RTX_CODE outer,
> return 0;
> }
>
> +/* Return true if we can avoid creating a constant pool entry for x. */
> +static bool
> +can_avoid_literal_pool_for_label_p (rtx x)
> +{
> + /* Normally we can assign constant values to target registers without
> + the help of constant pool. But there are cases we have to use constant
> + pool like:
> + 1) assign a label to register.
> + 2) sign-extend a 8bit value to 32bit and then assign to register.
> +
> + Constant pool access in format:
> + (set (reg r0) (mem (symbol_ref (".LC0"))))
> + will cause the use of literal pool (later in function arm_reorg).
> + So here we mark such format as an invalid format, then the compiler
> + will adjust it into:
> + (set (reg r0) (symbol_ref (".LC0")))
> + (set (reg r0) (mem (reg r0))).
> + No extra register is required, and (mem (reg r0)) won't cause the use
> + of literal pools. */
> + if (arm_disable_literal_pool && GET_CODE (x) == SYMBOL_REF
> + && CONSTANT_POOL_ADDRESS_P (x))
> + return 1;
> + return 0;
> +}
> +
> +
> /* Return nonzero if X is a valid Thumb-2 address operand. */
> static int
> thumb2_legitimate_address_p (machine_mode mode, rtx x, int strict_p)
> @@ -7799,23 +7833,7 @@ thumb2_legitimate_address_p (machine_mode mode, rtx x,
> int strict_p)
> && thumb2_legitimate_index_p (mode, xop0, strict_p)));
> }
>
> - /* Normally we can assign constant values to target registers without
> - the help of constant pool. But there are cases we have to use constant
> - pool like:
> - 1) assign a label to register.
> - 2) sign-extend a 8bit value to 32bit and then assign to register.
> -
> - Constant pool access in format:
> - (set (reg r0) (mem (symbol_ref (".LC0"))))
> - will cause the use of literal pool (later in function arm_reorg).
> - So here we mark such format as an invalid format, then the compiler
> - will adjust it into:
> - (set (reg r0) (symbol_ref (".LC0")))
> - (set (reg r0) (mem (reg r0))).
> - No extra register is required, and (mem (reg r0)) won't cause the use
> - of literal pools. */
> - else if (arm_disable_literal_pool && code == SYMBOL_REF
> - && CONSTANT_POOL_ADDRESS_P (x))
> + else if (can_avoid_literal_pool_for_label_p (x))
> return 0;
>
> else if (GET_MODE_CLASS (mode) != MODE_FLOAT
> @@ -8094,6 +8112,9 @@ thumb1_index_register_rtx_p (rtx x, int strict_p)
> int
> thumb1_legitimate_address_p (machine_mode mode, rtx x, int strict_p)
> {
> + if (TARGET_HAVE_MOVT && can_avoid_literal_pool_for_label_p (x))
> + return 0;
> +
> /* ??? Not clear if this is right. Experiment. */
> if (GET_MODE_SIZE (mode) < 4
> && !(reload_in_progress || reload_completed)
> @@ -8706,6 +8727,7 @@ thumb_legitimate_constant_p (machine_mode mode
> ATTRIBUTE_UNUSED, rtx x)
> return (CONST_INT_P (x)
> || CONST_DOUBLE_P (x)
> || CONSTANT_ADDRESS_P (x)
> + || (TARGET_HAVE_MOVT && GET_CODE (x) == SYMBOL_REF)
> || flag_pic);
> }
>
> diff --git a/gcc/config/arm/arm.md b/gcc/config/arm/arm.md
> index 21cfe3a4c31..d50059b28ab 100644
> --- a/gcc/config/arm/arm.md
> +++ b/gcc/config/arm/arm.md
> @@ -5972,7 +5972,7 @@
> {
> rtx base, offset, tmp;
>
> - if (TARGET_32BIT)
> + if (TARGET_HAVE_MOVT)
> {
> /* Everything except mem = const or mem = mem can be done easily. */
> if (MEM_P (operands[0]))
> @@ -5996,7 +5996,7 @@
> }
> }
> }
> - else /* TARGET_THUMB1... */
> + else /* Target doesn't have MOVT... */
> {
> if (can_create_pseudo_p ())
> {
> @@ -6096,7 +6096,7 @@
> (define_split
> [(set (match_operand:SI 0 "arm_general_register_operand" "")
> (match_operand:SI 1 "const_int_operand" ""))]
> - "TARGET_32BIT
> + "TARGET_HAVE_MOVT
> && (!(const_ok_for_arm (INTVAL (operands[1]))
> || const_ok_for_arm (~INTVAL (operands[1]))))"
> [(clobber (const_int 0))]
> diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
> index 438e553b340..68a558e9992 100644
> --- a/gcc/doc/invoke.texi
> +++ b/gcc/doc/invoke.texi
> @@ -15421,7 +15421,8 @@ by default.
> Do not allow constant data to be placed in code sections.
> Additionally, when compiling for ELF object format give all text sections the
> ELF processor-specific section attribute @code{SHF_ARM_PURECODE}. This
> option
> -is only available when generating non-pic code for ARMv7-M targets.
> +is only available when generating non-pic code for M-profile targets with the
> +MOVT instruction.
>
> @item -mcmse
> @opindex mcmse
> diff --git a/gcc/testsuite/gcc.target/arm/pure-code/pure-code.exp
> b/gcc/testsuite/gcc.target/arm/pure-code/pure-code.exp
> index 6a5dc552bf3..a5109231926 100644
> --- a/gcc/testsuite/gcc.target/arm/pure-code/pure-code.exp
> +++ b/gcc/testsuite/gcc.target/arm/pure-code/pure-code.exp
> @@ -26,8 +26,9 @@ if ![info exists DEFAULT_CFLAGS] then {
> }
>
> # The -mpure-code option is only available for M-profile targets that support
> -# thumb2.
> -if {[check_effective_target_arm_thumb2_ok]
> +# the MOVT instruction.
> +if {([check_effective_target_arm_thumb2_ok]
> + || [check_effective_target_arm_thumb1_movt_ok])
> && [check_effective_target_arm_cortex_m]} then {
> # Initialize `dg'.
> dg-init
> --
> 2.11.0
>
