On Tue, Aug 11, 2026 at 3:09 PM Hongtao Liu <[email protected]> wrote:
>
> On Sun, Aug 9, 2026 at 6:42 PM Roger Sayle <[email protected]> wrote:
> >
> >
> > This patch addresses PR target/126619, a performance regression caused by
> > my recent update of SSE vector initialization on x86_64. The new idiom
> > attempts to benefit from the implicit zero extension provided by movss
> > and movd, but this causes problems for (V4SF) cases were the (SFmode)
> > value is already in a register. Without newer extensions, GCC's approach
> > to zero extension (i.e. vec_init of (V4SF){ x, 0, 0, 0 }) is to perform
> > an interunit transfer to a general purpose integer register, and then
> > transfer the value back again. Inter-unit moves are expensive, especially
> > on older microarchitectures.
> >
> > The problem is fixed in several ways. The first is to tweak register
> > preferencing in vec_set<mode>_0's define_insn, so that general registers
> > are only used if the source/destination is already an integer GPR.
> > This changes reload from generating (two instructions):
> >
> > movd %xmm0, %eax
> > movd %eax, %xmm0
> >
> > to instead using:
> >
> > pxor %xmm1, %xmm1
> > movss %xmm0, %xmm1
> > movaps %xmm1, %xmm0
> >
> > which requires 3 instructions, and 1 extra register, but requires
> > no inter-unit moves. This matches what clang/llvm does.
> >
> > However, it's possible to do better, borrowing an idiom from
> > the middle-end's expansion of integer zero-extensions.
> >
> > pslldq $12, %xmm0
> > psrldq $12, %xmm0
> >
> > uses two instructions, and doesn't require an extra register.
> > Indeed, initializing the vector (V4SF){ 0, 0, 0, x } can be
> > done in a single instruction, as it doesn't require a "right"
> > shift.
> >
> > Additionally, for cases such as (V4SF){ a, b, c, d }, where
> > there is no benefit from zero extension, we should continue
> > using GCC's original CONCAT of V2SF idiom, avoiding any overhead
> > of zero extension (Hongtao's suggestion in the Bugzilla PR).
> >
> > Additionally, there are some additional V4SF initialization
> > tweaks. When loading from memory, where zero extension is
> > free "onevar_perm"s should construct { x, 0, 0, 0 } then
> > perform a shuffle using shufps, but when the source is a
> > register, it should construct { 0, 0, 0, x } (using the
> > single shift instruction described above), and perform a
> > modified shuffle using shufps from there.
> >
> > With TARGET_SSE4_1, the first insertps can be used to clear
> > (initialize) all the other elements to zero, and the remaining
> > non-zero elements can be inserted with regular insertps.
> >
> I think even with sse4.1 and above we should still use the original
> ix86_expand_vector_concat solution since insertps have sequential
> dependence with depth of 4, but vec_concat only with depth 2.
> so the vector_concat solution should still be faster(including the
> 4-memory case), maybe for optimization for size, insertps is prefered.
Similar for integer .i.e
v16qi
foo (char a, char b)
{
return __extension__(v16qi){a,b,a,b,a,b,a,b,a,b,a,b,a,b,a,b};
}
Now it generates 16 sequential movd/pinsrb, but originally just 5
insn{movd,pinsrb,punpcklwd,punpckldq, punpcklqdq}.
I think we should also prefer vector concat for vector integer
initialization in general, only prefer pinsr/movd for some specific
cases(.i.e. many zeros in the vector).
>
> >- else
> >+ else if (TARGET_SSE4_1)
>
> So may just
> else if (TARGET_SSE4_1 && optimize_insn_for_size_p ())
> {
> ......
> }
> else
> ix86_expand_vector_init_concat (V4SFmode, target, ops, 4);
>
> >+ {
> >+ int i;
> >+ rtx tmp = gen_reg_rtx (V4SFmode);
> >+ bool first_p = true;
> >...
> >+ else
> >+ ix86_expand_vector_init_concat (V4SFmode, target, ops, 4);
> >}
>
> > ;; see comment above inline_secondary_memory_needed function in i386.cc
> > (define_insn "vec_set<mode>_0"
> > [(set (match_operand:VI4F_128 0 "nonimmediate_operand"
> >- "=Yr,*x,v,v,v,v,x,x,v,Yr ,?x ,x ,m ,m ,m")
> >+ "=Yr,*x,v,v,v,!v,x,x,v,Yr ,?x ,x ,m ,m ,m")
> (vec_merge:VI4F_128
>
> Add *?* to the corresponding alternative *r* of operands[2] instead of
> add *!* to *v* of operands[0]?
> my experience is ?r is better to help LRA for register allocation choice.
>
> >+;; Use sse4_1_insertps_v4s[if] to vector_init one non-zero value.
> >+(define_insn "sse4_1_insertps_<mode>_init"
> >+ [(set (match_operand:VI4F_128 0 "register_operand" "=Yr,*x,v")
> >+ (vec_merge:VI4F_128
> >+ (vec_duplicate:VI4F_128
> >+ (match_operand:<ssescalarmode> 1 "nonimmediate_operand"
> >"Yrjm,*xjm,vm")
> >+ (match_operand:VI4F_128 2 "const0_operand")
> >+ (match_operand:SI 3 "const248_operand")))]
> >+ "TARGET_SSE4_1"
> >+{
> >+ int op3 = INTVAL (operands[3]);
> >+ operands[3] = GEN_INT ((exact_log2 (op3) << 4) + (op3 ^ 15));
> >+ switch (which_alternative)
> >+ {
> >+ case 0:
> >+ case 1:
> >+ return "insertps\t{%3, %1, %0|%0, %1, %3}";
> >+ case 2:
> >+ return "vinsertps\t{%3, %1, %0, %0|%0, %0, %1, %3}";
>
> Split alternative 2 into v,m and use {%3, %1, %1, %0|%0, %1, %1, %3}
> for alternative *v*, it can avoid false dependence for operands[0].
> Also for the new *m* alternative, can we only enable it when not
> preferred_for_speed since there's false dependence.
> (set (attr "preferred_for_speed")
> (cond [(eq_attr "alternative" "3")
> (symbol_ref "false")]
> (symbol_ref "true")))
>
> >+ default:
> >+ gcc_unreachable ();
> >+ }
>
> >+ if (TARGET_SSE4_1)
> >+ {
> >+ if (!REG_P (var) && !MEM_P (var))
> >+ var = force_reg (SFmode, var);
>
> - rtx tmp1 = gen_reg_rtx (V4SFmode);
> - vars[0] = ops[0];
> - vars[1] = CONST0_RTX (SFmode);
> - vars[2] = CONST0_RTX (SFmode);
> - vars[3] = CONST0_RTX (SFmode);
> - ix86_expand_vector_init_v4sf (tmp1, vars);
> + if (TARGET_SSE4_1)
> + {
> + rtx tmp = gen_reg_rtx (V4SFmode);
> + rtx val = ops[0];
> + if (!REG_P (val) && !MEM_P (val))
> + val = force_reg (SFmode, val);
> + emit_insn (gen_vec_setv4sf_0 (tmp, CONST0_RTX (V4SFmode), val));
> + val = ops[1];
> + if (!REG_P (val) && !MEM_P (val))
> + val = force_reg (SFmode, val);
> + emit_insn (gen_vec_setv4sf_sse4_1 (target, tmp, val, GEN_INT (2)));
> + }
>
> I think we can generate 1 insertps for {a,b,0,0} {a, 0, b,0}, {a, 0,
> 0, b}, here still generates 2 insertps, maybe we can directy
> gen_sse4_1_insertps_v4sf, use subreg to convert SFmode to V4SFmode?
>
>
> BR,
> Hongtao
--
BR,
Hongtao
