Regtested on x86_64-linux-gnu with
RUNTESTFLAGS="--target_board=unix\{-m32,-m64\}".
OK for trunk?
-- >8 --
AC_PROG_LD was obsoleted on libtool commit
388b7626dcde775ab1f48ca69bd8fdd3d94d9b1a.
Using the updated macro name everywhere also removes an extra
execution of the code that checks for GNU ld.
Update comments that reference AC_PROG_LD too.
config/ChangeLog:
* hwcaps.m4 (GCC_CHECK_LINKER_HWCAP): Update AC_PROG_LD to LT_PATH_LD.
libatomic/ChangeLog:
* acinclude.m4 (LIBAT_CHECK_LINKER_FEATURES): Update AC_PROG_LD to
LT_PATH_LD.
* configure: Regenerate.
libgomp/ChangeLog:
* acinclude.m4 (LIBGOMP_CHECK_LINKER_FEATURES): Update AC_PROG_LD to
LT_PATH_LD.
* configure: Regenerate.
libitm/ChangeLog:
* acinclude.m4 (LIBITM_CHECK_LINKER_FEATURES): Update AC_PROG_LD to
LT_PATH_LD.
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* acinclude.m4 (GLIBCXX_CHECK_LINKER_FEATURES): Update AC_PROG_LD to
LT_PATH_LD.
* configure: Regenerate.
Signed-off-by: Pietro Monteiro <[email protected]>
---
config/hwcaps.m4 | 2 +-
libatomic/acinclude.m4 | 4 +-
libatomic/configure | 112 +-------------------------------
libgomp/acinclude.m4 | 4 +-
libgomp/configure | 112 +-------------------------------
libitm/acinclude.m4 | 4 +-
libitm/configure | 112 +-------------------------------
libstdc++-v3/acinclude.m4 | 4 +-
libstdc++-v3/configure | 130 +++-----------------------------------
9 files changed, 22 insertions(+), 462 deletions(-)
diff --git a/config/hwcaps.m4 b/config/hwcaps.m4
index f3d03906447..aedbc4913fb 100644
--- a/config/hwcaps.m4
+++ b/config/hwcaps.m4
@@ -42,7 +42,7 @@ dnl LD (as a side effect of testing)
dnl
AC_DEFUN([GCC_CHECK_LINKER_HWCAP], [
test -z "$HWCAP_LDFLAGS" && HWCAP_LDFLAGS=''
- AC_REQUIRE([AC_PROG_LD])
+ AC_REQUIRE([LT_PATH_LD])
ac_save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LFLAGS -mclear-hwcap"
diff --git a/libatomic/acinclude.m4 b/libatomic/acinclude.m4
index 04fc19e5fbb..5b34d17e0e3 100644
--- a/libatomic/acinclude.m4
+++ b/libatomic/acinclude.m4
@@ -300,7 +300,7 @@ AC_DEFUN([LIBAT_CHECK_LINKER_FEATURES], [
# by now (in libtool), but require it now just to be safe...
test -z "$SECTION_LDFLAGS" && SECTION_LDFLAGS=''
test -z "$OPT_LDFLAGS" && OPT_LDFLAGS=''
- AC_REQUIRE([AC_PROG_LD])
+ AC_REQUIRE([LT_PATH_LD])
AC_REQUIRE([AC_PROG_AWK])
# The name set by libtool depends on the version of libtool. Shame on us
@@ -311,7 +311,7 @@ AC_DEFUN([LIBAT_CHECK_LINKER_FEATURES], [
# set (hence we're using an older libtool), then set it.
if test x${with_gnu_ld+set} != xset; then
if test x${ac_cv_prog_gnu_ld+set} != xset; then
- # We got through "ac_require(ac_prog_ld)" and still not set? Huh?
+ # We got through "ac_require(lt_path_ld)" and still not set? Huh?
with_gnu_ld=no
else
with_gnu_ld=$ac_cv_prog_gnu_ld
diff --git a/libatomic/configure b/libatomic/configure
index 00c29e71d79..ef8f57f41fa 100755
--- a/libatomic/configure
+++ b/libatomic/configure
@@ -15473,116 +15473,6 @@ fi
# Check linker support.
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then :
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
- with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
-$as_echo_n "checking for ld used by $CC... " >&6; }
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [\\/]* | ?:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
- # Canonicalize the pathname of ld
- ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
- while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
-$as_echo_n "checking for GNU ld... " >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
-$as_echo_n "checking for non-GNU ld... " >&6; }
-fi
-if ${lt_cv_path_LD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some variants of GNU ld only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
- ;;
- *)
- test "$with_gnu_ld" != yes && break
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
-else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
-$as_echo "$LD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU
ld" >&5
-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if ${lt_cv_prog_gnu_ld+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- # I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- lt_cv_prog_gnu_ld=yes
- ;;
-*)
- lt_cv_prog_gnu_ld=no
- ;;
-esac
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
-$as_echo "$lt_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-
-
-
-
-
# If we're not using GNU ld, then there's no point in even trying these
# tests. Check for that first. We should have already tested for gld
# by now (in libtool), but require it now just to be safe...
@@ -15599,7 +15489,7 @@ with_gnu_ld=$lt_cv_prog_gnu_ld
# set (hence we're using an older libtool), then set it.
if test x${with_gnu_ld+set} != xset; then
if test x${ac_cv_prog_gnu_ld+set} != xset; then
- # We got through "ac_require(ac_prog_ld)" and still not set? Huh?
+ # We got through "ac_require(lt_path_ld)" and still not set? Huh?
with_gnu_ld=no
else
with_gnu_ld=$ac_cv_prog_gnu_ld
diff --git a/libgomp/acinclude.m4 b/libgomp/acinclude.m4
index 4b81c23098d..086eb1a6248 100644
--- a/libgomp/acinclude.m4
+++ b/libgomp/acinclude.m4
@@ -123,7 +123,7 @@ AC_DEFUN([LIBGOMP_CHECK_LINKER_FEATURES], [
# by now (in libtool), but require it now just to be safe...
test -z "$SECTION_LDFLAGS" && SECTION_LDFLAGS=''
test -z "$OPT_LDFLAGS" && OPT_LDFLAGS=''
- AC_REQUIRE([AC_PROG_LD])
+ AC_REQUIRE([LT_PATH_LD])
AC_REQUIRE([AC_PROG_AWK])
# The name set by libtool depends on the version of libtool. Shame on us
@@ -134,7 +134,7 @@ AC_DEFUN([LIBGOMP_CHECK_LINKER_FEATURES], [
# set (hence we're using an older libtool), then set it.
if test x${with_gnu_ld+set} != xset; then
if test x${ac_cv_prog_gnu_ld+set} != xset; then
- # We got through "ac_require(ac_prog_ld)" and still not set? Huh?
+ # We got through "ac_require(lt_path_ld)" and still not set? Huh?
with_gnu_ld=no
else
with_gnu_ld=$ac_cv_prog_gnu_ld
diff --git a/libgomp/configure b/libgomp/configure
index 75ac6131dc7..94ea7935d85 100755
--- a/libgomp/configure
+++ b/libgomp/configure
@@ -16325,116 +16325,6 @@ $as_echo "#define HAVE_ATTRIBUTE_ALIAS 1" >>confdefs.h
fi
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then :
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
- with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
-$as_echo_n "checking for ld used by $CC... " >&6; }
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [\\/]* | ?:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
- # Canonicalize the pathname of ld
- ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
- while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
-$as_echo_n "checking for GNU ld... " >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
-$as_echo_n "checking for non-GNU ld... " >&6; }
-fi
-if ${lt_cv_path_LD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some variants of GNU ld only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
- ;;
- *)
- test "$with_gnu_ld" != yes && break
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
-else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
-$as_echo "$LD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU
ld" >&5
-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if ${lt_cv_prog_gnu_ld+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- # I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- lt_cv_prog_gnu_ld=yes
- ;;
-*)
- lt_cv_prog_gnu_ld=no
- ;;
-esac
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
-$as_echo "$lt_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-
-
-
-
-
# If we're not using GNU ld, then there's no point in even trying these
# tests. Check for that first. We should have already tested for gld
# by now (in libtool), but require it now just to be safe...
@@ -16451,7 +16341,7 @@ with_gnu_ld=$lt_cv_prog_gnu_ld
# set (hence we're using an older libtool), then set it.
if test x${with_gnu_ld+set} != xset; then
if test x${ac_cv_prog_gnu_ld+set} != xset; then
- # We got through "ac_require(ac_prog_ld)" and still not set? Huh?
+ # We got through "ac_require(lt_path_ld)" and still not set? Huh?
with_gnu_ld=no
else
with_gnu_ld=$ac_cv_prog_gnu_ld
diff --git a/libitm/acinclude.m4 b/libitm/acinclude.m4
index 98ac55c0ff9..d46d44d1bb7 100644
--- a/libitm/acinclude.m4
+++ b/libitm/acinclude.m4
@@ -231,7 +231,7 @@ AC_DEFUN([LIBITM_CHECK_LINKER_FEATURES], [
# by now (in libtool), but require it now just to be safe...
test -z "$SECTION_LDFLAGS" && SECTION_LDFLAGS=''
test -z "$OPT_LDFLAGS" && OPT_LDFLAGS=''
- AC_REQUIRE([AC_PROG_LD])
+ AC_REQUIRE([LT_PATH_LD])
AC_REQUIRE([AC_PROG_AWK])
# The name set by libtool depends on the version of libtool. Shame on us
@@ -242,7 +242,7 @@ AC_DEFUN([LIBITM_CHECK_LINKER_FEATURES], [
# set (hence we're using an older libtool), then set it.
if test x${with_gnu_ld+set} != xset; then
if test x${ac_cv_prog_gnu_ld+set} != xset; then
- # We got through "ac_require(ac_prog_ld)" and still not set? Huh?
+ # We got through "ac_require(lt_path_ld)" and still not set? Huh?
with_gnu_ld=no
else
with_gnu_ld=$ac_cv_prog_gnu_ld
diff --git a/libitm/configure b/libitm/configure
index 9014085a00c..b951ac6f598 100755
--- a/libitm/configure
+++ b/libitm/configure
@@ -17054,116 +17054,6 @@ $as_echo "#define HAVE_ATTRIBUTE_ALIAS 1" >>confdefs.h
# Check linker hardware capability support.
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then :
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
- with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
-$as_echo_n "checking for ld used by $CC... " >&6; }
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [\\/]* | ?:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
- # Canonicalize the pathname of ld
- ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
- while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
-$as_echo_n "checking for GNU ld... " >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
-$as_echo_n "checking for non-GNU ld... " >&6; }
-fi
-if ${lt_cv_path_LD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some variants of GNU ld only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
- ;;
- *)
- test "$with_gnu_ld" != yes && break
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
-else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
-$as_echo "$LD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU
ld" >&5
-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if ${lt_cv_prog_gnu_ld+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- # I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- lt_cv_prog_gnu_ld=yes
- ;;
-*)
- lt_cv_prog_gnu_ld=no
- ;;
-esac
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
-$as_echo "$lt_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-
-
-
-
-
test -z "$HWCAP_LDFLAGS" && HWCAP_LDFLAGS=''
@@ -17233,7 +17123,7 @@ fi
# set (hence we're using an older libtool), then set it.
if test x${with_gnu_ld+set} != xset; then
if test x${ac_cv_prog_gnu_ld+set} != xset; then
- # We got through "ac_require(ac_prog_ld)" and still not set? Huh?
+ # We got through "ac_require(lt_path_ld)" and still not set? Huh?
with_gnu_ld=no
else
with_gnu_ld=$ac_cv_prog_gnu_ld
diff --git a/libstdc++-v3/acinclude.m4 b/libstdc++-v3/acinclude.m4
index 9315c5e074b..8b4ccc1e692 100644
--- a/libstdc++-v3/acinclude.m4
+++ b/libstdc++-v3/acinclude.m4
@@ -190,7 +190,7 @@ AC_DEFUN([GLIBCXX_CHECK_LINKER_FEATURES], [
# by now (in libtool), but require it now just to be safe...
test -z "$SECTION_LDFLAGS" && SECTION_LDFLAGS=''
test -z "$OPT_LDFLAGS" && OPT_LDFLAGS=''
- AC_REQUIRE([AC_PROG_LD])
+ AC_REQUIRE([LT_PATH_LD])
AC_REQUIRE([AC_PROG_AWK])
# The name set by libtool depends on the version of libtool. Shame on us
@@ -201,7 +201,7 @@ AC_DEFUN([GLIBCXX_CHECK_LINKER_FEATURES], [
# set (hence we're using an older libtool), then set it.
if test x${with_gnu_ld+set} != xset; then
if test x${ac_cv_prog_gnu_ld+set} != xset; then
- # We got through "ac_require(ac_prog_ld)" and still not set? Huh?
+ # We got through "ac_require(lt_path_ld)" and still not set? Huh?
with_gnu_ld=no
else
with_gnu_ld=$ac_cv_prog_gnu_ld
diff --git a/libstdc++-v3/configure b/libstdc++-v3/configure
index b8eb29f4f0f..f98e54607ab 100755
--- a/libstdc++-v3/configure
+++ b/libstdc++-v3/configure
@@ -22966,116 +22966,6 @@ if $GLIBCXX_IS_NATIVE; then
CANADIAN=no
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then :
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
- with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
-$as_echo_n "checking for ld used by $CC... " >&6; }
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [\\/]* | ?:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
- # Canonicalize the pathname of ld
- ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
- while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
-$as_echo_n "checking for GNU ld... " >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
-$as_echo_n "checking for non-GNU ld... " >&6; }
-fi
-if ${lt_cv_path_LD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some variants of GNU ld only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
- ;;
- *)
- test "$with_gnu_ld" != yes && break
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
-else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
-$as_echo "$LD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU
ld" >&5
-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if ${lt_cv_prog_gnu_ld+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- # I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- lt_cv_prog_gnu_ld=yes
- ;;
-*)
- lt_cv_prog_gnu_ld=no
- ;;
-esac
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
-$as_echo "$lt_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-
-
-
-
-
# If we're not using GNU ld, then there's no point in even trying these
# tests. Check for that first. We should have already tested for gld
# by now (in libtool), but require it now just to be safe...
@@ -23092,7 +22982,7 @@ with_gnu_ld=$lt_cv_prog_gnu_ld
# set (hence we're using an older libtool), then set it.
if test x${with_gnu_ld+set} != xset; then
if test x${ac_cv_prog_gnu_ld+set} != xset; then
- # We got through "ac_require(ac_prog_ld)" and still not set? Huh?
+ # We got through "ac_require(lt_path_ld)" and still not set? Huh?
with_gnu_ld=no
else
with_gnu_ld=$ac_cv_prog_gnu_ld
@@ -29021,7 +28911,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
# set (hence we're using an older libtool), then set it.
if test x${with_gnu_ld+set} != xset; then
if test x${ac_cv_prog_gnu_ld+set} != xset; then
- # We got through "ac_require(ac_prog_ld)" and still not set? Huh?
+ # We got through "ac_require(lt_path_ld)" and still not set? Huh?
with_gnu_ld=no
else
with_gnu_ld=$ac_cv_prog_gnu_ld
@@ -32155,7 +32045,7 @@ done
# set (hence we're using an older libtool), then set it.
if test x${with_gnu_ld+set} != xset; then
if test x${ac_cv_prog_gnu_ld+set} != xset; then
- # We got through "ac_require(ac_prog_ld)" and still not set? Huh?
+ # We got through "ac_require(lt_path_ld)" and still not set? Huh?
with_gnu_ld=no
else
with_gnu_ld=$ac_cv_prog_gnu_ld
@@ -38280,7 +38170,7 @@ done
# set (hence we're using an older libtool), then set it.
if test x${with_gnu_ld+set} != xset; then
if test x${ac_cv_prog_gnu_ld+set} != xset; then
- # We got through "ac_require(ac_prog_ld)" and still not set? Huh?
+ # We got through "ac_require(lt_path_ld)" and still not set? Huh?
with_gnu_ld=no
else
with_gnu_ld=$ac_cv_prog_gnu_ld
@@ -38571,7 +38461,7 @@ done
# set (hence we're using an older libtool), then set it.
if test x${with_gnu_ld+set} != xset; then
if test x${ac_cv_prog_gnu_ld+set} != xset; then
- # We got through "ac_require(ac_prog_ld)" and still not set? Huh?
+ # We got through "ac_require(lt_path_ld)" and still not set? Huh?
with_gnu_ld=no
else
with_gnu_ld=$ac_cv_prog_gnu_ld
@@ -39038,7 +38928,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
# set (hence we're using an older libtool), then set it.
if test x${with_gnu_ld+set} != xset; then
if test x${ac_cv_prog_gnu_ld+set} != xset; then
- # We got through "ac_require(ac_prog_ld)" and still not set? Huh?
+ # We got through "ac_require(lt_path_ld)" and still not set? Huh?
with_gnu_ld=no
else
with_gnu_ld=$ac_cv_prog_gnu_ld
@@ -42435,7 +42325,7 @@ done
# set (hence we're using an older libtool), then set it.
if test x${with_gnu_ld+set} != xset; then
if test x${ac_cv_prog_gnu_ld+set} != xset; then
- # We got through "ac_require(ac_prog_ld)" and still not set? Huh?
+ # We got through "ac_require(lt_path_ld)" and still not set? Huh?
with_gnu_ld=no
else
with_gnu_ld=$ac_cv_prog_gnu_ld
@@ -45785,7 +45675,7 @@ $as_echo "#define HAVE_TLS 1" >>confdefs.h
# set (hence we're using an older libtool), then set it.
if test x${with_gnu_ld+set} != xset; then
if test x${ac_cv_prog_gnu_ld+set} != xset; then
- # We got through "ac_require(ac_prog_ld)" and still not set? Huh?
+ # We got through "ac_require(lt_path_ld)" and still not set? Huh?
with_gnu_ld=no
else
with_gnu_ld=$ac_cv_prog_gnu_ld
@@ -46001,7 +45891,7 @@ done
# set (hence we're using an older libtool), then set it.
if test x${with_gnu_ld+set} != xset; then
if test x${ac_cv_prog_gnu_ld+set} != xset; then
- # We got through "ac_require(ac_prog_ld)" and still not set? Huh?
+ # We got through "ac_require(lt_path_ld)" and still not set? Huh?
with_gnu_ld=no
else
with_gnu_ld=$ac_cv_prog_gnu_ld
@@ -53740,7 +53630,7 @@ $as_echo "$glibcxx_cv_libbacktrace_atomics" >&6; }
CXXFLAGS='-O0 -S'
cat > conftest.$ac_ext << EOF
-#line 53743 "configure"
+#line 53633 "configure"
#include <stddef.h>
int main()
{
--
2.54.0
