A restored build has been detected on builder gccrust-fedora-x86_64 while
building gccrust.
Full details are available at:
https://builder.sourceware.org/buildbot/#builders/16/builds/547
Build state: build successful
Revision: fe648fb91c51cb477cf0380105c0bb85796be2df
Worker: bb1-2
Build Reason: (unknown)
Blamelist: Aldy Hernandez <al...@redhat.com>, Alex Coplan
<alex.cop...@arm.com>, Alexander Monakov <amona...@ispras.ru>, Alexandre Oliva
<ol...@adacore.com>, Andre Vieira <andre.simoesdiasvie...@arm.com>, Andrea
Corallo <andrea.cora...@arm.com>, Andrew Carlotti <andrew.carlo...@arm.com>,
Andrew MacLeod <amacl...@redhat.com>, Andrew Pinski <apin...@marvell.com>,
Andrew Pinski <pins...@gmail.com>, Andrew Stubbs <a...@codesourcery.com>,
Antoni Boucher <boua...@zoho.com>, Arnaud Charlet <char...@adacore.com>, Arsen
Arsenović <ar...@aarsen.me>, Arthur Cohen <arthur.co...@embecosm.com>, Bernhard
Reutner-Fischer <al...@gcc.gnu.org>, Bernhard Reutner-Fischer
<rep.dot....@gmail.com>, Björn Schäpers <bjo...@hazardy.de>, Bob Duff
<d...@adacore.com>, Boris Yakobowski <yakobow...@adacore.com>, Cedric Landet
<lan...@adacore.com>, Cesar Philippidis <ce...@codesourcery.com>,
Charles-François Natali <cf.nat...@gmail.com>, Christoph Müllner
<christoph.muell...@vrull.eu>, Christophe Lyon <christophe.l...@arm.com>,
Claire Dross <dr...@adacore.com>, David Faust <david.fa...@oracle.com>, David
Malcolm <dmalc...@redhat.com>, David Seifert <s...@gentoo.org>, Dimitar
Dimitrov <dimi...@dinux.eu>, Eric Botcazou <ebotca...@adacore.com>, Eric
Gallager <egalla...@gcc.gnu.org>, Eugene Rozenfeld <ero...@microsoft.com>, Fei
Gao <gao...@eswincomputing.com>, Florian Weimer <fwei...@redhat.com>, François
Dumont <fdum...@gcc.gnu.org>, Frolov Daniil <frolov...@phystech.edu>, GCC
Administrator <gccad...@gcc.gnu.org>, Gaius Mulley <gaiusm...@gmail.com>, Gary
Dismukes <dismu...@adacore.com>, Ghjuvan Lacambre <lacam...@adacore.com>, H.J.
Lu <hjl.to...@gmail.com>, Hans-Peter Nilsson <h...@axis.com>, Haochen Gui
<guih...@gcc.gnu.org>, Haochen Jiang <haochen.ji...@intel.com>, Harald Anlauf
<anl...@gmx.de>, Hongyu Wang <hongyu.w...@intel.com>, Hu, Lin1
<lin1...@intel.com>, Iain Buclaw <ibuc...@gdcproject.org>, Iain Sandoe
<i...@sandoe.co.uk>, Ian Lance Taylor <i...@golang.org>, Iskander Shakirzyanov
<iskan...@ispras.ru>, Jakob Hasse <0xja...@users.noreply.github.com>, Jakub
Jelinek <ja...@redhat.com>, Jason Merrill <ja...@redhat.com>, Javier Miranda
<mira...@adacore.com>, Jeff Chapman II <jchap...@lock3software.com>, Jeff Law
<jeffreya...@gmail.com>, Jeff Law <j...@ventanamicro.com>, Jia-Wei Chen
<jia...@iscas.ac.cn>, Jinyang He <hejiny...@loongson.cn>, Jiufu Guo
<guoji...@linux.ibm.com>, Joel Brobecker <brobec...@adacore.com>, Johannes
Kliemann <kliem...@adacore.com>, John David Anglin <dang...@gcc.gnu.org>,
Jonathan Wakely <jwak...@redhat.com>, Joseph Myers <jos...@codesourcery.com>,
Josue Nava Bello <n...@adacore.com>, José Rui Faustino de Sousa
<jrfso...@gmail.com>, Ju-Zhe Zhong <juzhe.zh...@rivai.ai>, Justin Squirek
<squi...@adacore.com>, Kewen Lin <li...@linux.ibm.com>, Kewen.Lin
<li...@gcc.gnu.org>, Kwok Cheung Yeung <k...@codesourcery.com>, Kyrylo Tkachov
<kyrylo.tkac...@arm.com>, Lewis Hyatt <lhy...@gmail.com>, Liaiss Merzougue
<merzou...@adacore.com>, Lili Cui <lili....@intel.com>, Lulu Cheng
<chengl...@loongson.cn>, Maciej W. Rozycki <ma...@embecosm.com>, Marc Poulhiès
<poulh...@adacore.com>, Marcel Vollweiler <mar...@codesourcery.com>, Marek
Polacek <pola...@redhat.com>, Martin Jambor <mjam...@suse.cz>, Martin Liska
<mli...@suse.cz>, Max Filippov <jcmvb...@gmail.com>, Michael Collison
<colli...@rivosinc.com>, Nathan Sidwell <nat...@acm.org>, Nathaniel Shead
<nathanielosh...@gmail.com>, Patrick Bernardi <berna...@adacore.com>, Patrick
Palka <ppa...@redhat.com>, Paul Thomas <pa...@gcc.gnu.org>, Paul-Antoine Arras
<p...@codesourcery.com>, Philipp Tomsich <philipp.toms...@vrull.eu>, Piotr
Trojanek <troja...@adacore.com>, Prathamesh Kulkarni
<prathamesh.kulka...@linaro.org>, Qing Zhao <qing.z...@oracle.com>, Quentin
Ochem <oc...@adacore.com>, Rainer Orth <r...@cebitec.uni-bielefeld.de>, Ramana
Radhakrishnan <ramana....@gmail.com>, Rasmus Villemoes
<r...@rasmusvillemoes.dk>, Richard Biener <rguent...@suse.de>, Richard Purdie
<richard.pur...@linuxfoundation.org>, Ronan Desplanques
<desplanq...@adacore.com>, Sam James <s...@gentoo.org>, Sandra Loosemore
<san...@codesourcery.com>, Scott Snyder <s...@li-snyder.org>, Sebastian Huber
<sebastian.hu...@embedded-brains.de>, Sebastian Pop <s...@amazon.com>, Siddhesh
Poyarekar <siddh...@gotplt.org>, Sinan <sinan....@linux.alibaba.com>, Srinath
Parvathaneni <srinath.parvathan...@arm.com>, Stam Markianos-Wright
<stam.markianos-wri...@arm.com>, Steve Baird <ba...@adacore.com>, Steve Kargl
<ka...@gcc.gnu.org>, Surya Kumari Jangala <jskum...@linux.ibm.com>, Tamar
Christina <tamar.christ...@arm.com>, Thomas Schwinge <tho...@codesourcery.com>,
Tobias Burnus <tob...@codesourcery.com>, Torbjörn SVENSSON
<torbjorn.svens...@foss.st.com>, Uros Bizjak <ubiz...@gmail.com>, Vladimir N.
Makarov <vmaka...@redhat.com>, Weimin Pan <weimin....@oracle.com>, Wilco
Dijkstra <wdijk...@arm.com>, Wilco Dijkstra <wilco.dijks...@arm.com>, Will
Hawkins <wh...@obs.cr>, Xi Ruoyao <xry...@xry111.site>, Xionghu Luo
<xionghu...@tencent.com>, Yannick Moy <m...@adacore.com>, Yixuan Chen
<chenyix...@iscas.ac.cn>, YunQiang Su <yunqiang...@cipunited.com>, Yuri Gribov
<y.gri...@samsung.com>, bors[bot]
<26634292+bors[bot]@users.noreply.github.com>, konglin1
<lingling.k...@intel.com>, liuhongt <hongtao....@intel.com>, mtsamis
<manolis.tsa...@vrull.eu>
Steps:
- 0: worker_preparation ( success )
- 1: git checkout ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/16/builds/547/steps/1/logs/stdio
- 2: rm -rf gccrs-build ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/16/builds/547/steps/2/logs/stdio
- 3: configure ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/16/builds/547/steps/3/logs/stdio
- 4: make ( warnings )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/16/builds/547/steps/4/logs/stdio
- warnings (34):
https://builder.sourceware.org/buildbot/#builders/16/builds/547/steps/4/logs/warnings__34_
- 5: make check ( warnings )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/16/builds/547/steps/5/logs/stdio
- rust.sum:
https://builder.sourceware.org/buildbot/#builders/16/builds/547/steps/5/logs/rust_sum
- rust.log:
https://builder.sourceware.org/buildbot/#builders/16/builds/547/steps/5/logs/rust_log
- warnings (6):
https://builder.sourceware.org/buildbot/#builders/16/builds/547/steps/5/logs/warnings__6_
- 6: grep unexpected rust.sum ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/16/builds/547/steps/6/logs/stdio
- 7: prep ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/16/builds/547/steps/7/logs/stdio
- 8: build bunsen.cpio.gz ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/16/builds/547/steps/8/logs/stdio
- 9: fetch bunsen.cpio.gz ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/16/builds/547/steps/9/logs/stdio
- 10: unpack bunsen.cpio.gz ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/16/builds/547/steps/10/logs/stdio
- 11: pass .bunsen.source.gitname ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/16/builds/547/steps/11/logs/stdio
- 12: pass .bunsen.source.gitdescribe ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/16/builds/547/steps/12/logs/stdio
- 13: pass .bunsen.source.gitbranch ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/16/builds/547/steps/13/logs/stdio
- 14: pass .bunsen.source.gitrepo ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/16/builds/547/steps/14/logs/stdio
- 15: upload to bunsen ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/16/builds/547/steps/15/logs/stdio
- 16: clean up ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/16/builds/547/steps/16/logs/stdio
- 17: rm -rf gccrs-build_1 ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/16/builds/547/steps/17/logs/stdio
A restored build has been detected on builder gccrust-debian-i386 while
building gccrust.
Full details are available at:
https://builder.sourceware.org/buildbot/#builders/27/builds/562
Build state: build successful
Revision: fe648fb91c51cb477cf0380105c0bb85796be2df
Worker: debian-i386-2
Build Reason: (unknown)
Blamelist: Aldy Hernandez <al...@redhat.com>, Alex Coplan
<alex.cop...@arm.com>, Alexander Monakov <amona...@ispras.ru>, Alexandre Oliva
<ol...@adacore.com>, Andre Vieira <andre.simoesdiasvie...@arm.com>, Andrea
Corallo <andrea.cora...@arm.com>, Andrew Carlotti <andrew.carlo...@arm.com>,
Andrew MacLeod <amacl...@redhat.com>, Andrew Pinski <apin...@marvell.com>,
Andrew Pinski <pins...@gmail.com>, Andrew Stubbs <a...@codesourcery.com>,
Antoni Boucher <boua...@zoho.com>, Arnaud Charlet <char...@adacore.com>, Arsen
Arsenović <ar...@aarsen.me>, Arthur Cohen <arthur.co...@embecosm.com>, Bernhard
Reutner-Fischer <al...@gcc.gnu.org>, Bernhard Reutner-Fischer
<rep.dot....@gmail.com>, Björn Schäpers <bjo...@hazardy.de>, Bob Duff
<d...@adacore.com>, Boris Yakobowski <yakobow...@adacore.com>, Cedric Landet
<lan...@adacore.com>, Cesar Philippidis <ce...@codesourcery.com>,
Charles-François Natali <cf.nat...@gmail.com>, Christoph Müllner
<christoph.muell...@vrull.eu>, Christophe Lyon <christophe.l...@arm.com>,
Claire Dross <dr...@adacore.com>, David Faust <david.fa...@oracle.com>, David
Malcolm <dmalc...@redhat.com>, David Seifert <s...@gentoo.org>, Dimitar
Dimitrov <dimi...@dinux.eu>, Eric Botcazou <ebotca...@adacore.com>, Eric
Gallager <egalla...@gcc.gnu.org>, Eugene Rozenfeld <ero...@microsoft.com>, Fei
Gao <gao...@eswincomputing.com>, Florian Weimer <fwei...@redhat.com>, François
Dumont <fdum...@gcc.gnu.org>, Frolov Daniil <frolov...@phystech.edu>, GCC
Administrator <gccad...@gcc.gnu.org>, Gaius Mulley <gaiusm...@gmail.com>, Gary
Dismukes <dismu...@adacore.com>, Ghjuvan Lacambre <lacam...@adacore.com>, H.J.
Lu <hjl.to...@gmail.com>, Hans-Peter Nilsson <h...@axis.com>, Haochen Gui
<guih...@gcc.gnu.org>, Haochen Jiang <haochen.ji...@intel.com>, Harald Anlauf
<anl...@gmx.de>, Hongyu Wang <hongyu.w...@intel.com>, Hu, Lin1
<lin1...@intel.com>, Iain Buclaw <ibuc...@gdcproject.org>, Iain Sandoe
<i...@sandoe.co.uk>, Ian Lance Taylor <i...@golang.org>, Iskander Shakirzyanov
<iskan...@ispras.ru>, Jakob Hasse <0xja...@users.noreply.github.com>, Jakub
Jelinek <ja...@redhat.com>, Jason Merrill <ja...@redhat.com>, Javier Miranda
<mira...@adacore.com>, Jeff Chapman II <jchap...@lock3software.com>, Jeff Law
<jeffreya...@gmail.com>, Jeff Law <j...@ventanamicro.com>, Jia-Wei Chen
<jia...@iscas.ac.cn>, Jinyang He <hejiny...@loongson.cn>, Jiufu Guo
<guoji...@linux.ibm.com>, Joel Brobecker <brobec...@adacore.com>, Johannes
Kliemann <kliem...@adacore.com>, John David Anglin <dang...@gcc.gnu.org>,
Jonathan Wakely <jwak...@redhat.com>, Joseph Myers <jos...@codesourcery.com>,
Josue Nava Bello <n...@adacore.com>, José Rui Faustino de Sousa
<jrfso...@gmail.com>, Ju-Zhe Zhong <juzhe.zh...@rivai.ai>, Justin Squirek
<squi...@adacore.com>, Kewen Lin <li...@linux.ibm.com>, Kewen.Lin
<li...@gcc.gnu.org>, Kwok Cheung Yeung <k...@codesourcery.com>, Kyrylo Tkachov
<kyrylo.tkac...@arm.com>, Lewis Hyatt <lhy...@gmail.com>, Liaiss Merzougue
<merzou...@adacore.com>, Lili Cui <lili....@intel.com>, Lulu Cheng
<chengl...@loongson.cn>, Maciej W. Rozycki <ma...@embecosm.com>, Marc Poulhiès
<poulh...@adacore.com>, Marcel Vollweiler <mar...@codesourcery.com>, Marek
Polacek <pola...@redhat.com>, Martin Jambor <mjam...@suse.cz>, Martin Liska
<mli...@suse.cz>, Max Filippov <jcmvb...@gmail.com>, Michael Collison
<colli...@rivosinc.com>, Nathan Sidwell <nat...@acm.org>, Nathaniel Shead
<nathanielosh...@gmail.com>, Patrick Bernardi <berna...@adacore.com>, Patrick
Palka <ppa...@redhat.com>, Paul Thomas <pa...@gcc.gnu.org>, Paul-Antoine Arras
<p...@codesourcery.com>, Philipp Tomsich <philipp.toms...@vrull.eu>, Piotr
Trojanek <troja...@adacore.com>, Prathamesh Kulkarni
<prathamesh.kulka...@linaro.org>, Qing Zhao <qing.z...@oracle.com>, Quentin
Ochem <oc...@adacore.com>, Rainer Orth <r...@cebitec.uni-bielefeld.de>, Ramana
Radhakrishnan <ramana....@gmail.com>, Rasmus Villemoes
<r...@rasmusvillemoes.dk>, Richard Biener <rguent...@suse.de>, Richard Purdie
<richard.pur...@linuxfoundation.org>, Ronan Desplanques
<desplanq...@adacore.com>, Sam James <s...@gentoo.org>, Sandra Loosemore
<san...@codesourcery.com>, Scott Snyder <s...@li-snyder.org>, Sebastian Huber
<sebastian.hu...@embedded-brains.de>, Sebastian Pop <s...@amazon.com>, Siddhesh
Poyarekar <siddh...@gotplt.org>, Sinan <sinan....@linux.alibaba.com>, Srinath
Parvathaneni <srinath.parvathan...@arm.com>, Stam Markianos-Wright
<stam.markianos-wri...@arm.com>, Steve Baird <ba...@adacore.com>, Steve Kargl
<ka...@gcc.gnu.org>, Surya Kumari Jangala <jskum...@linux.ibm.com>, Tamar
Christina <tamar.christ...@arm.com>, Thomas Schwinge <tho...@codesourcery.com>,
Tobias Burnus <tob...@codesourcery.com>, Torbjörn SVENSSON
<torbjorn.svens...@foss.st.com>, Uros Bizjak <ubiz...@gmail.com>, Vladimir N.
Makarov <vmaka...@redhat.com>, Weimin Pan <weimin....@oracle.com>, Wilco
Dijkstra <wdijk...@arm.com>, Wilco Dijkstra <wilco.dijks...@arm.com>, Will
Hawkins <wh...@obs.cr>, Xi Ruoyao <xry...@xry111.site>, Xionghu Luo
<xionghu...@tencent.com>, Yannick Moy <m...@adacore.com>, Yixuan Chen
<chenyix...@iscas.ac.cn>, YunQiang Su <yunqiang...@cipunited.com>, Yuri Gribov
<y.gri...@samsung.com>, bors[bot]
<26634292+bors[bot]@users.noreply.github.com>, konglin1
<lingling.k...@intel.com>, liuhongt <hongtao....@intel.com>, mtsamis
<manolis.tsa...@vrull.eu>
Steps:
- 0: worker_preparation ( success )
- 1: git checkout ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/27/builds/562/steps/1/logs/stdio
- 2: rm -rf gccrs-build ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/27/builds/562/steps/2/logs/stdio
- 3: configure ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/27/builds/562/steps/3/logs/stdio
- 4: make ( warnings )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/27/builds/562/steps/4/logs/stdio
- warnings (28):
https://builder.sourceware.org/buildbot/#builders/27/builds/562/steps/4/logs/warnings__28_
- 5: make check ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/27/builds/562/steps/5/logs/stdio
- rust.sum:
https://builder.sourceware.org/buildbot/#builders/27/builds/562/steps/5/logs/rust_sum
- rust.log:
https://builder.sourceware.org/buildbot/#builders/27/builds/562/steps/5/logs/rust_log
- 6: grep unexpected rust.sum ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/27/builds/562/steps/6/logs/stdio
- 7: prep ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/27/builds/562/steps/7/logs/stdio
- 8: build bunsen.cpio.gz ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/27/builds/562/steps/8/logs/stdio
- 9: fetch bunsen.cpio.gz ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/27/builds/562/steps/9/logs/stdio
- 10: unpack bunsen.cpio.gz ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/27/builds/562/steps/10/logs/stdio
- 11: pass .bunsen.source.gitname ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/27/builds/562/steps/11/logs/stdio
- 12: pass .bunsen.source.gitdescribe ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/27/builds/562/steps/12/logs/stdio
- 13: pass .bunsen.source.gitbranch ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/27/builds/562/steps/13/logs/stdio
- 14: pass .bunsen.source.gitrepo ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/27/builds/562/steps/14/logs/stdio
- 15: upload to bunsen ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/27/builds/562/steps/15/logs/stdio
- 16: clean up ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/27/builds/562/steps/16/logs/stdio
- 17: rm -rf gccrs-build_1 ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/27/builds/562/steps/17/logs/stdio
A restored build has been detected on builder gccrust-opensusetw-x86_64 while
building gccrust.
Full details are available at:
https://builder.sourceware.org/buildbot/#builders/103/builds/399
Build state: build successful
Revision: fe648fb91c51cb477cf0380105c0bb85796be2df
Worker: bb2-2
Build Reason: (unknown)
Blamelist: Aldy Hernandez <al...@redhat.com>, Alex Coplan
<alex.cop...@arm.com>, Alexander Monakov <amona...@ispras.ru>, Alexandre Oliva
<ol...@adacore.com>, Andre Vieira <andre.simoesdiasvie...@arm.com>, Andrea
Corallo <andrea.cora...@arm.com>, Andrew Carlotti <andrew.carlo...@arm.com>,
Andrew MacLeod <amacl...@redhat.com>, Andrew Pinski <apin...@marvell.com>,
Andrew Pinski <pins...@gmail.com>, Andrew Stubbs <a...@codesourcery.com>,
Antoni Boucher <boua...@zoho.com>, Arnaud Charlet <char...@adacore.com>, Arsen
Arsenović <ar...@aarsen.me>, Arthur Cohen <arthur.co...@embecosm.com>, Bernhard
Reutner-Fischer <al...@gcc.gnu.org>, Bernhard Reutner-Fischer
<rep.dot....@gmail.com>, Björn Schäpers <bjo...@hazardy.de>, Bob Duff
<d...@adacore.com>, Boris Yakobowski <yakobow...@adacore.com>, Cedric Landet
<lan...@adacore.com>, Cesar Philippidis <ce...@codesourcery.com>,
Charles-François Natali <cf.nat...@gmail.com>, Christoph Müllner
<christoph.muell...@vrull.eu>, Christophe Lyon <christophe.l...@arm.com>,
Claire Dross <dr...@adacore.com>, David Faust <david.fa...@oracle.com>, David
Malcolm <dmalc...@redhat.com>, David Seifert <s...@gentoo.org>, Dimitar
Dimitrov <dimi...@dinux.eu>, Eric Botcazou <ebotca...@adacore.com>, Eric
Gallager <egalla...@gcc.gnu.org>, Eugene Rozenfeld <ero...@microsoft.com>, Fei
Gao <gao...@eswincomputing.com>, Florian Weimer <fwei...@redhat.com>, François
Dumont <fdum...@gcc.gnu.org>, Frolov Daniil <frolov...@phystech.edu>, GCC
Administrator <gccad...@gcc.gnu.org>, Gaius Mulley <gaiusm...@gmail.com>, Gary
Dismukes <dismu...@adacore.com>, Ghjuvan Lacambre <lacam...@adacore.com>, H.J.
Lu <hjl.to...@gmail.com>, Hans-Peter Nilsson <h...@axis.com>, Haochen Gui
<guih...@gcc.gnu.org>, Haochen Jiang <haochen.ji...@intel.com>, Harald Anlauf
<anl...@gmx.de>, Hongyu Wang <hongyu.w...@intel.com>, Hu, Lin1
<lin1...@intel.com>, Iain Buclaw <ibuc...@gdcproject.org>, Iain Sandoe
<i...@sandoe.co.uk>, Ian Lance Taylor <i...@golang.org>, Iskander Shakirzyanov
<iskan...@ispras.ru>, Jakob Hasse <0xja...@users.noreply.github.com>, Jakub
Jelinek <ja...@redhat.com>, Jason Merrill <ja...@redhat.com>, Javier Miranda
<mira...@adacore.com>, Jeff Chapman II <jchap...@lock3software.com>, Jeff Law
<jeffreya...@gmail.com>, Jeff Law <j...@ventanamicro.com>, Jia-Wei Chen
<jia...@iscas.ac.cn>, Jinyang He <hejiny...@loongson.cn>, Jiufu Guo
<guoji...@linux.ibm.com>, Joel Brobecker <brobec...@adacore.com>, Johannes
Kliemann <kliem...@adacore.com>, John David Anglin <dang...@gcc.gnu.org>,
Jonathan Wakely <jwak...@redhat.com>, Joseph Myers <jos...@codesourcery.com>,
Josue Nava Bello <n...@adacore.com>, José Rui Faustino de Sousa
<jrfso...@gmail.com>, Ju-Zhe Zhong <juzhe.zh...@rivai.ai>, Justin Squirek
<squi...@adacore.com>, Kewen Lin <li...@linux.ibm.com>, Kewen.Lin
<li...@gcc.gnu.org>, Kwok Cheung Yeung <k...@codesourcery.com>, Kyrylo Tkachov
<kyrylo.tkac...@arm.com>, Lewis Hyatt <lhy...@gmail.com>, Liaiss Merzougue
<merzou...@adacore.com>, Lili Cui <lili....@intel.com>, Lulu Cheng
<chengl...@loongson.cn>, Maciej W. Rozycki <ma...@embecosm.com>, Marc Poulhiès
<poulh...@adacore.com>, Marcel Vollweiler <mar...@codesourcery.com>, Marek
Polacek <pola...@redhat.com>, Martin Jambor <mjam...@suse.cz>, Martin Liska
<mli...@suse.cz>, Max Filippov <jcmvb...@gmail.com>, Michael Collison
<colli...@rivosinc.com>, Nathan Sidwell <nat...@acm.org>, Nathaniel Shead
<nathanielosh...@gmail.com>, Patrick Bernardi <berna...@adacore.com>, Patrick
Palka <ppa...@redhat.com>, Paul Thomas <pa...@gcc.gnu.org>, Paul-Antoine Arras
<p...@codesourcery.com>, Philipp Tomsich <philipp.toms...@vrull.eu>, Piotr
Trojanek <troja...@adacore.com>, Prathamesh Kulkarni
<prathamesh.kulka...@linaro.org>, Qing Zhao <qing.z...@oracle.com>, Quentin
Ochem <oc...@adacore.com>, Rainer Orth <r...@cebitec.uni-bielefeld.de>, Ramana
Radhakrishnan <ramana....@gmail.com>, Rasmus Villemoes
<r...@rasmusvillemoes.dk>, Richard Biener <rguent...@suse.de>, Richard Purdie
<richard.pur...@linuxfoundation.org>, Ronan Desplanques
<desplanq...@adacore.com>, Sam James <s...@gentoo.org>, Sandra Loosemore
<san...@codesourcery.com>, Scott Snyder <s...@li-snyder.org>, Sebastian Huber
<sebastian.hu...@embedded-brains.de>, Sebastian Pop <s...@amazon.com>, Siddhesh
Poyarekar <siddh...@gotplt.org>, Sinan <sinan....@linux.alibaba.com>, Srinath
Parvathaneni <srinath.parvathan...@arm.com>, Stam Markianos-Wright
<stam.markianos-wri...@arm.com>, Steve Baird <ba...@adacore.com>, Steve Kargl
<ka...@gcc.gnu.org>, Surya Kumari Jangala <jskum...@linux.ibm.com>, Tamar
Christina <tamar.christ...@arm.com>, Thomas Schwinge <tho...@codesourcery.com>,
Tobias Burnus <tob...@codesourcery.com>, Torbjörn SVENSSON
<torbjorn.svens...@foss.st.com>, Uros Bizjak <ubiz...@gmail.com>, Vladimir N.
Makarov <vmaka...@redhat.com>, Weimin Pan <weimin....@oracle.com>, Wilco
Dijkstra <wdijk...@arm.com>, Wilco Dijkstra <wilco.dijks...@arm.com>, Will
Hawkins <wh...@obs.cr>, Xi Ruoyao <xry...@xry111.site>, Xionghu Luo
<xionghu...@tencent.com>, Yannick Moy <m...@adacore.com>, Yixuan Chen
<chenyix...@iscas.ac.cn>, YunQiang Su <yunqiang...@cipunited.com>, Yuri Gribov
<y.gri...@samsung.com>, bors[bot]
<26634292+bors[bot]@users.noreply.github.com>, konglin1
<lingling.k...@intel.com>, liuhongt <hongtao....@intel.com>, mtsamis
<manolis.tsa...@vrull.eu>
Steps:
- 0: worker_preparation ( success )
- 1: git checkout ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/103/builds/399/steps/1/logs/stdio
- 2: rm -rf gccrs-build ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/103/builds/399/steps/2/logs/stdio
- 3: configure ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/103/builds/399/steps/3/logs/stdio
- 4: make ( warnings )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/103/builds/399/steps/4/logs/stdio
- warnings (33):
https://builder.sourceware.org/buildbot/#builders/103/builds/399/steps/4/logs/warnings__33_
- 5: make check ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/103/builds/399/steps/5/logs/stdio
- rust.sum:
https://builder.sourceware.org/buildbot/#builders/103/builds/399/steps/5/logs/rust_sum
- rust.log:
https://builder.sourceware.org/buildbot/#builders/103/builds/399/steps/5/logs/rust_log
- 6: grep unexpected rust.sum ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/103/builds/399/steps/6/logs/stdio
- 7: prep ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/103/builds/399/steps/7/logs/stdio
- 8: build bunsen.cpio.gz ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/103/builds/399/steps/8/logs/stdio
- 9: fetch bunsen.cpio.gz ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/103/builds/399/steps/9/logs/stdio
- 10: unpack bunsen.cpio.gz ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/103/builds/399/steps/10/logs/stdio
- 11: pass .bunsen.source.gitname ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/103/builds/399/steps/11/logs/stdio
- 12: pass .bunsen.source.gitdescribe ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/103/builds/399/steps/12/logs/stdio
- 13: pass .bunsen.source.gitbranch ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/103/builds/399/steps/13/logs/stdio
- 14: pass .bunsen.source.gitrepo ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/103/builds/399/steps/14/logs/stdio
- 15: upload to bunsen ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/103/builds/399/steps/15/logs/stdio
- 16: clean up ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/103/builds/399/steps/16/logs/stdio
- 17: rm -rf gccrs-build_1 ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/103/builds/399/steps/17/logs/stdio
A restored build has been detected on builder gccrust-opensuseleap-x86_64 while
building gccrust.
Full details are available at:
https://builder.sourceware.org/buildbot/#builders/104/builds/401
Build state: build successful
Revision: fe648fb91c51cb477cf0380105c0bb85796be2df
Worker: bb2-1
Build Reason: (unknown)
Blamelist: Aldy Hernandez <al...@redhat.com>, Alex Coplan
<alex.cop...@arm.com>, Alexander Monakov <amona...@ispras.ru>, Alexandre Oliva
<ol...@adacore.com>, Andre Vieira <andre.simoesdiasvie...@arm.com>, Andrea
Corallo <andrea.cora...@arm.com>, Andrew Carlotti <andrew.carlo...@arm.com>,
Andrew MacLeod <amacl...@redhat.com>, Andrew Pinski <apin...@marvell.com>,
Andrew Pinski <pins...@gmail.com>, Andrew Stubbs <a...@codesourcery.com>,
Antoni Boucher <boua...@zoho.com>, Arnaud Charlet <char...@adacore.com>, Arsen
Arsenović <ar...@aarsen.me>, Arthur Cohen <arthur.co...@embecosm.com>, Bernhard
Reutner-Fischer <al...@gcc.gnu.org>, Bernhard Reutner-Fischer
<rep.dot....@gmail.com>, Björn Schäpers <bjo...@hazardy.de>, Bob Duff
<d...@adacore.com>, Boris Yakobowski <yakobow...@adacore.com>, Cedric Landet
<lan...@adacore.com>, Cesar Philippidis <ce...@codesourcery.com>,
Charles-François Natali <cf.nat...@gmail.com>, Christoph Müllner
<christoph.muell...@vrull.eu>, Christophe Lyon <christophe.l...@arm.com>,
Claire Dross <dr...@adacore.com>, David Faust <david.fa...@oracle.com>, David
Malcolm <dmalc...@redhat.com>, David Seifert <s...@gentoo.org>, Dimitar
Dimitrov <dimi...@dinux.eu>, Eric Botcazou <ebotca...@adacore.com>, Eric
Gallager <egalla...@gcc.gnu.org>, Eugene Rozenfeld <ero...@microsoft.com>, Fei
Gao <gao...@eswincomputing.com>, Florian Weimer <fwei...@redhat.com>, François
Dumont <fdum...@gcc.gnu.org>, Frolov Daniil <frolov...@phystech.edu>, GCC
Administrator <gccad...@gcc.gnu.org>, Gaius Mulley <gaiusm...@gmail.com>, Gary
Dismukes <dismu...@adacore.com>, Ghjuvan Lacambre <lacam...@adacore.com>, H.J.
Lu <hjl.to...@gmail.com>, Hans-Peter Nilsson <h...@axis.com>, Haochen Gui
<guih...@gcc.gnu.org>, Haochen Jiang <haochen.ji...@intel.com>, Harald Anlauf
<anl...@gmx.de>, Hongyu Wang <hongyu.w...@intel.com>, Hu, Lin1
<lin1...@intel.com>, Iain Buclaw <ibuc...@gdcproject.org>, Iain Sandoe
<i...@sandoe.co.uk>, Ian Lance Taylor <i...@golang.org>, Iskander Shakirzyanov
<iskan...@ispras.ru>, Jakob Hasse <0xja...@users.noreply.github.com>, Jakub
Jelinek <ja...@redhat.com>, Jason Merrill <ja...@redhat.com>, Javier Miranda
<mira...@adacore.com>, Jeff Chapman II <jchap...@lock3software.com>, Jeff Law
<jeffreya...@gmail.com>, Jeff Law <j...@ventanamicro.com>, Jia-Wei Chen
<jia...@iscas.ac.cn>, Jinyang He <hejiny...@loongson.cn>, Jiufu Guo
<guoji...@linux.ibm.com>, Joel Brobecker <brobec...@adacore.com>, Johannes
Kliemann <kliem...@adacore.com>, John David Anglin <dang...@gcc.gnu.org>,
Jonathan Wakely <jwak...@redhat.com>, Joseph Myers <jos...@codesourcery.com>,
Josue Nava Bello <n...@adacore.com>, José Rui Faustino de Sousa
<jrfso...@gmail.com>, Ju-Zhe Zhong <juzhe.zh...@rivai.ai>, Justin Squirek
<squi...@adacore.com>, Kewen Lin <li...@linux.ibm.com>, Kewen.Lin
<li...@gcc.gnu.org>, Kwok Cheung Yeung <k...@codesourcery.com>, Kyrylo Tkachov
<kyrylo.tkac...@arm.com>, Lewis Hyatt <lhy...@gmail.com>, Liaiss Merzougue
<merzou...@adacore.com>, Lili Cui <lili....@intel.com>, Lulu Cheng
<chengl...@loongson.cn>, Maciej W. Rozycki <ma...@embecosm.com>, Marc Poulhiès
<poulh...@adacore.com>, Marcel Vollweiler <mar...@codesourcery.com>, Marek
Polacek <pola...@redhat.com>, Martin Jambor <mjam...@suse.cz>, Martin Liska
<mli...@suse.cz>, Max Filippov <jcmvb...@gmail.com>, Michael Collison
<colli...@rivosinc.com>, Nathan Sidwell <nat...@acm.org>, Nathaniel Shead
<nathanielosh...@gmail.com>, Patrick Bernardi <berna...@adacore.com>, Patrick
Palka <ppa...@redhat.com>, Paul Thomas <pa...@gcc.gnu.org>, Paul-Antoine Arras
<p...@codesourcery.com>, Philipp Tomsich <philipp.toms...@vrull.eu>, Piotr
Trojanek <troja...@adacore.com>, Prathamesh Kulkarni
<prathamesh.kulka...@linaro.org>, Qing Zhao <qing.z...@oracle.com>, Quentin
Ochem <oc...@adacore.com>, Rainer Orth <r...@cebitec.uni-bielefeld.de>, Ramana
Radhakrishnan <ramana....@gmail.com>, Rasmus Villemoes
<r...@rasmusvillemoes.dk>, Richard Biener <rguent...@suse.de>, Richard Purdie
<richard.pur...@linuxfoundation.org>, Ronan Desplanques
<desplanq...@adacore.com>, Sam James <s...@gentoo.org>, Sandra Loosemore
<san...@codesourcery.com>, Scott Snyder <s...@li-snyder.org>, Sebastian Huber
<sebastian.hu...@embedded-brains.de>, Sebastian Pop <s...@amazon.com>, Siddhesh
Poyarekar <siddh...@gotplt.org>, Sinan <sinan....@linux.alibaba.com>, Srinath
Parvathaneni <srinath.parvathan...@arm.com>, Stam Markianos-Wright
<stam.markianos-wri...@arm.com>, Steve Baird <ba...@adacore.com>, Steve Kargl
<ka...@gcc.gnu.org>, Surya Kumari Jangala <jskum...@linux.ibm.com>, Tamar
Christina <tamar.christ...@arm.com>, Thomas Schwinge <tho...@codesourcery.com>,
Tobias Burnus <tob...@codesourcery.com>, Torbjörn SVENSSON
<torbjorn.svens...@foss.st.com>, Uros Bizjak <ubiz...@gmail.com>, Vladimir N.
Makarov <vmaka...@redhat.com>, Weimin Pan <weimin....@oracle.com>, Wilco
Dijkstra <wdijk...@arm.com>, Wilco Dijkstra <wilco.dijks...@arm.com>, Will
Hawkins <wh...@obs.cr>, Xi Ruoyao <xry...@xry111.site>, Xionghu Luo
<xionghu...@tencent.com>, Yannick Moy <m...@adacore.com>, Yixuan Chen
<chenyix...@iscas.ac.cn>, YunQiang Su <yunqiang...@cipunited.com>, Yuri Gribov
<y.gri...@samsung.com>, bors[bot]
<26634292+bors[bot]@users.noreply.github.com>, konglin1
<lingling.k...@intel.com>, liuhongt <hongtao....@intel.com>, mtsamis
<manolis.tsa...@vrull.eu>
Steps:
- 0: worker_preparation ( success )
- 1: git checkout ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/104/builds/401/steps/1/logs/stdio
- 2: rm -rf gccrs-build ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/104/builds/401/steps/2/logs/stdio
- 3: configure ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/104/builds/401/steps/3/logs/stdio
- 4: make ( warnings )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/104/builds/401/steps/4/logs/stdio
- warnings (113):
https://builder.sourceware.org/buildbot/#builders/104/builds/401/steps/4/logs/warnings__113_
- 5: make check ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/104/builds/401/steps/5/logs/stdio
- rust.sum:
https://builder.sourceware.org/buildbot/#builders/104/builds/401/steps/5/logs/rust_sum
- rust.log:
https://builder.sourceware.org/buildbot/#builders/104/builds/401/steps/5/logs/rust_log
- 6: grep unexpected rust.sum ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/104/builds/401/steps/6/logs/stdio
- 7: prep ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/104/builds/401/steps/7/logs/stdio
- 8: build bunsen.cpio.gz ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/104/builds/401/steps/8/logs/stdio
- 9: fetch bunsen.cpio.gz ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/104/builds/401/steps/9/logs/stdio
- 10: unpack bunsen.cpio.gz ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/104/builds/401/steps/10/logs/stdio
- 11: pass .bunsen.source.gitname ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/104/builds/401/steps/11/logs/stdio
- 12: pass .bunsen.source.gitdescribe ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/104/builds/401/steps/12/logs/stdio
- 13: pass .bunsen.source.gitbranch ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/104/builds/401/steps/13/logs/stdio
- 14: pass .bunsen.source.gitrepo ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/104/builds/401/steps/14/logs/stdio
- 15: upload to bunsen ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/104/builds/401/steps/15/logs/stdio
- 16: clean up ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/104/builds/401/steps/16/logs/stdio
- 17: rm -rf gccrs-build_1 ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/104/builds/401/steps/17/logs/stdio
A restored build has been detected on builder gccrust-rawhide-x86_64 while
building gccrust.
Full details are available at:
https://builder.sourceware.org/buildbot/#builders/132/builds/335
Build state: build successful
Revision: fe648fb91c51cb477cf0380105c0bb85796be2df
Worker: bbo1-1
Build Reason: (unknown)
Blamelist: Aldy Hernandez <al...@redhat.com>, Alex Coplan
<alex.cop...@arm.com>, Alexander Monakov <amona...@ispras.ru>, Alexandre Oliva
<ol...@adacore.com>, Andre Vieira <andre.simoesdiasvie...@arm.com>, Andrea
Corallo <andrea.cora...@arm.com>, Andrew Carlotti <andrew.carlo...@arm.com>,
Andrew MacLeod <amacl...@redhat.com>, Andrew Pinski <apin...@marvell.com>,
Andrew Pinski <pins...@gmail.com>, Andrew Stubbs <a...@codesourcery.com>,
Antoni Boucher <boua...@zoho.com>, Arnaud Charlet <char...@adacore.com>, Arsen
Arsenović <ar...@aarsen.me>, Arthur Cohen <arthur.co...@embecosm.com>, Bernhard
Reutner-Fischer <al...@gcc.gnu.org>, Bernhard Reutner-Fischer
<rep.dot....@gmail.com>, Björn Schäpers <bjo...@hazardy.de>, Bob Duff
<d...@adacore.com>, Boris Yakobowski <yakobow...@adacore.com>, Cedric Landet
<lan...@adacore.com>, Cesar Philippidis <ce...@codesourcery.com>,
Charles-François Natali <cf.nat...@gmail.com>, Christoph Müllner
<christoph.muell...@vrull.eu>, Christophe Lyon <christophe.l...@arm.com>,
Claire Dross <dr...@adacore.com>, David Faust <david.fa...@oracle.com>, David
Malcolm <dmalc...@redhat.com>, David Seifert <s...@gentoo.org>, Dimitar
Dimitrov <dimi...@dinux.eu>, Eric Botcazou <ebotca...@adacore.com>, Eric
Gallager <egalla...@gcc.gnu.org>, Eugene Rozenfeld <ero...@microsoft.com>, Fei
Gao <gao...@eswincomputing.com>, Florian Weimer <fwei...@redhat.com>, François
Dumont <fdum...@gcc.gnu.org>, Frolov Daniil <frolov...@phystech.edu>, GCC
Administrator <gccad...@gcc.gnu.org>, Gaius Mulley <gaiusm...@gmail.com>, Gary
Dismukes <dismu...@adacore.com>, Ghjuvan Lacambre <lacam...@adacore.com>, H.J.
Lu <hjl.to...@gmail.com>, Hans-Peter Nilsson <h...@axis.com>, Haochen Gui
<guih...@gcc.gnu.org>, Haochen Jiang <haochen.ji...@intel.com>, Harald Anlauf
<anl...@gmx.de>, Hongyu Wang <hongyu.w...@intel.com>, Hu, Lin1
<lin1...@intel.com>, Iain Buclaw <ibuc...@gdcproject.org>, Iain Sandoe
<i...@sandoe.co.uk>, Ian Lance Taylor <i...@golang.org>, Iskander Shakirzyanov
<iskan...@ispras.ru>, Jakob Hasse <0xja...@users.noreply.github.com>, Jakub
Jelinek <ja...@redhat.com>, Jason Merrill <ja...@redhat.com>, Javier Miranda
<mira...@adacore.com>, Jeff Chapman II <jchap...@lock3software.com>, Jeff Law
<jeffreya...@gmail.com>, Jeff Law <j...@ventanamicro.com>, Jia-Wei Chen
<jia...@iscas.ac.cn>, Jinyang He <hejiny...@loongson.cn>, Jiufu Guo
<guoji...@linux.ibm.com>, Joel Brobecker <brobec...@adacore.com>, Johannes
Kliemann <kliem...@adacore.com>, John David Anglin <dang...@gcc.gnu.org>,
Jonathan Wakely <jwak...@redhat.com>, Joseph Myers <jos...@codesourcery.com>,
Josue Nava Bello <n...@adacore.com>, José Rui Faustino de Sousa
<jrfso...@gmail.com>, Ju-Zhe Zhong <juzhe.zh...@rivai.ai>, Justin Squirek
<squi...@adacore.com>, Kewen Lin <li...@linux.ibm.com>, Kewen.Lin
<li...@gcc.gnu.org>, Kwok Cheung Yeung <k...@codesourcery.com>, Kyrylo Tkachov
<kyrylo.tkac...@arm.com>, Lewis Hyatt <lhy...@gmail.com>, Liaiss Merzougue
<merzou...@adacore.com>, Lili Cui <lili....@intel.com>, Lulu Cheng
<chengl...@loongson.cn>, Maciej W. Rozycki <ma...@embecosm.com>, Marc Poulhiès
<poulh...@adacore.com>, Marcel Vollweiler <mar...@codesourcery.com>, Marek
Polacek <pola...@redhat.com>, Martin Jambor <mjam...@suse.cz>, Martin Liska
<mli...@suse.cz>, Max Filippov <jcmvb...@gmail.com>, Michael Collison
<colli...@rivosinc.com>, Nathan Sidwell <nat...@acm.org>, Nathaniel Shead
<nathanielosh...@gmail.com>, Patrick Bernardi <berna...@adacore.com>, Patrick
Palka <ppa...@redhat.com>, Paul Thomas <pa...@gcc.gnu.org>, Paul-Antoine Arras
<p...@codesourcery.com>, Philipp Tomsich <philipp.toms...@vrull.eu>, Piotr
Trojanek <troja...@adacore.com>, Prathamesh Kulkarni
<prathamesh.kulka...@linaro.org>, Qing Zhao <qing.z...@oracle.com>, Quentin
Ochem <oc...@adacore.com>, Rainer Orth <r...@cebitec.uni-bielefeld.de>, Ramana
Radhakrishnan <ramana....@gmail.com>, Rasmus Villemoes
<r...@rasmusvillemoes.dk>, Richard Biener <rguent...@suse.de>, Richard Purdie
<richard.pur...@linuxfoundation.org>, Ronan Desplanques
<desplanq...@adacore.com>, Sam James <s...@gentoo.org>, Sandra Loosemore
<san...@codesourcery.com>, Scott Snyder <s...@li-snyder.org>, Sebastian Huber
<sebastian.hu...@embedded-brains.de>, Sebastian Pop <s...@amazon.com>, Siddhesh
Poyarekar <siddh...@gotplt.org>, Sinan <sinan....@linux.alibaba.com>, Srinath
Parvathaneni <srinath.parvathan...@arm.com>, Stam Markianos-Wright
<stam.markianos-wri...@arm.com>, Steve Baird <ba...@adacore.com>, Steve Kargl
<ka...@gcc.gnu.org>, Surya Kumari Jangala <jskum...@linux.ibm.com>, Tamar
Christina <tamar.christ...@arm.com>, Thomas Schwinge <tho...@codesourcery.com>,
Tobias Burnus <tob...@codesourcery.com>, Torbjörn SVENSSON
<torbjorn.svens...@foss.st.com>, Uros Bizjak <ubiz...@gmail.com>, Vladimir N.
Makarov <vmaka...@redhat.com>, Weimin Pan <weimin....@oracle.com>, Wilco
Dijkstra <wdijk...@arm.com>, Wilco Dijkstra <wilco.dijks...@arm.com>, Will
Hawkins <wh...@obs.cr>, Xi Ruoyao <xry...@xry111.site>, Xionghu Luo
<xionghu...@tencent.com>, Yannick Moy <m...@adacore.com>, Yixuan Chen
<chenyix...@iscas.ac.cn>, YunQiang Su <yunqiang...@cipunited.com>, Yuri Gribov
<y.gri...@samsung.com>, bors[bot]
<26634292+bors[bot]@users.noreply.github.com>, konglin1
<lingling.k...@intel.com>, liuhongt <hongtao....@intel.com>, mtsamis
<manolis.tsa...@vrull.eu>
Steps:
- 0: worker_preparation ( success )
- 1: git checkout ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/132/builds/335/steps/1/logs/stdio
- 2: rm -rf gccrs-build ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/132/builds/335/steps/2/logs/stdio
- 3: configure ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/132/builds/335/steps/3/logs/stdio
- 4: make ( warnings )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/132/builds/335/steps/4/logs/stdio
- warnings (44):
https://builder.sourceware.org/buildbot/#builders/132/builds/335/steps/4/logs/warnings__44_
- 5: make check ( warnings )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/132/builds/335/steps/5/logs/stdio
- rust.sum:
https://builder.sourceware.org/buildbot/#builders/132/builds/335/steps/5/logs/rust_sum
- rust.log:
https://builder.sourceware.org/buildbot/#builders/132/builds/335/steps/5/logs/rust_log
- warnings (8):
https://builder.sourceware.org/buildbot/#builders/132/builds/335/steps/5/logs/warnings__8_
- 6: grep unexpected rust.sum ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/132/builds/335/steps/6/logs/stdio
- 7: prep ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/132/builds/335/steps/7/logs/stdio
- 8: build bunsen.cpio.gz ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/132/builds/335/steps/8/logs/stdio
- 9: fetch bunsen.cpio.gz ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/132/builds/335/steps/9/logs/stdio
- 10: unpack bunsen.cpio.gz ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/132/builds/335/steps/10/logs/stdio
- 11: pass .bunsen.source.gitname ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/132/builds/335/steps/11/logs/stdio
- 12: pass .bunsen.source.gitdescribe ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/132/builds/335/steps/12/logs/stdio
- 13: pass .bunsen.source.gitbranch ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/132/builds/335/steps/13/logs/stdio
- 14: pass .bunsen.source.gitrepo ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/132/builds/335/steps/14/logs/stdio
- 15: upload to bunsen ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/132/builds/335/steps/15/logs/stdio
- 16: clean up ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/132/builds/335/steps/16/logs/stdio
- 17: rm -rf gccrs-build_1 ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/132/builds/335/steps/17/logs/stdio
A restored build has been detected on builder gccrust-debian-testing-x86_64
while building gccrust.
Full details are available at:
https://builder.sourceware.org/buildbot/#builders/146/builds/330
Build state: build successful
Revision: fe648fb91c51cb477cf0380105c0bb85796be2df
Worker: bb1-1
Build Reason: (unknown)
Blamelist: Aldy Hernandez <al...@redhat.com>, Alex Coplan
<alex.cop...@arm.com>, Alexander Monakov <amona...@ispras.ru>, Alexandre Oliva
<ol...@adacore.com>, Andre Vieira <andre.simoesdiasvie...@arm.com>, Andrea
Corallo <andrea.cora...@arm.com>, Andrew Carlotti <andrew.carlo...@arm.com>,
Andrew MacLeod <amacl...@redhat.com>, Andrew Pinski <apin...@marvell.com>,
Andrew Pinski <pins...@gmail.com>, Andrew Stubbs <a...@codesourcery.com>,
Antoni Boucher <boua...@zoho.com>, Arnaud Charlet <char...@adacore.com>, Arsen
Arsenović <ar...@aarsen.me>, Arthur Cohen <arthur.co...@embecosm.com>, Bernhard
Reutner-Fischer <al...@gcc.gnu.org>, Bernhard Reutner-Fischer
<rep.dot....@gmail.com>, Björn Schäpers <bjo...@hazardy.de>, Bob Duff
<d...@adacore.com>, Boris Yakobowski <yakobow...@adacore.com>, Cedric Landet
<lan...@adacore.com>, Cesar Philippidis <ce...@codesourcery.com>,
Charles-François Natali <cf.nat...@gmail.com>, Christoph Müllner
<christoph.muell...@vrull.eu>, Christophe Lyon <christophe.l...@arm.com>,
Claire Dross <dr...@adacore.com>, David Faust <david.fa...@oracle.com>, David
Malcolm <dmalc...@redhat.com>, David Seifert <s...@gentoo.org>, Dimitar
Dimitrov <dimi...@dinux.eu>, Eric Botcazou <ebotca...@adacore.com>, Eric
Gallager <egalla...@gcc.gnu.org>, Eugene Rozenfeld <ero...@microsoft.com>, Fei
Gao <gao...@eswincomputing.com>, Florian Weimer <fwei...@redhat.com>, François
Dumont <fdum...@gcc.gnu.org>, Frolov Daniil <frolov...@phystech.edu>, GCC
Administrator <gccad...@gcc.gnu.org>, Gaius Mulley <gaiusm...@gmail.com>, Gary
Dismukes <dismu...@adacore.com>, Ghjuvan Lacambre <lacam...@adacore.com>, H.J.
Lu <hjl.to...@gmail.com>, Hans-Peter Nilsson <h...@axis.com>, Haochen Gui
<guih...@gcc.gnu.org>, Haochen Jiang <haochen.ji...@intel.com>, Harald Anlauf
<anl...@gmx.de>, Hongyu Wang <hongyu.w...@intel.com>, Hu, Lin1
<lin1...@intel.com>, Iain Buclaw <ibuc...@gdcproject.org>, Iain Sandoe
<i...@sandoe.co.uk>, Ian Lance Taylor <i...@golang.org>, Iskander Shakirzyanov
<iskan...@ispras.ru>, Jakob Hasse <0xja...@users.noreply.github.com>, Jakub
Jelinek <ja...@redhat.com>, Jason Merrill <ja...@redhat.com>, Javier Miranda
<mira...@adacore.com>, Jeff Chapman II <jchap...@lock3software.com>, Jeff Law
<jeffreya...@gmail.com>, Jeff Law <j...@ventanamicro.com>, Jia-Wei Chen
<jia...@iscas.ac.cn>, Jinyang He <hejiny...@loongson.cn>, Jiufu Guo
<guoji...@linux.ibm.com>, Joel Brobecker <brobec...@adacore.com>, Johannes
Kliemann <kliem...@adacore.com>, John David Anglin <dang...@gcc.gnu.org>,
Jonathan Wakely <jwak...@redhat.com>, Joseph Myers <jos...@codesourcery.com>,
Josue Nava Bello <n...@adacore.com>, José Rui Faustino de Sousa
<jrfso...@gmail.com>, Ju-Zhe Zhong <juzhe.zh...@rivai.ai>, Justin Squirek
<squi...@adacore.com>, Kewen Lin <li...@linux.ibm.com>, Kewen.Lin
<li...@gcc.gnu.org>, Kwok Cheung Yeung <k...@codesourcery.com>, Kyrylo Tkachov
<kyrylo.tkac...@arm.com>, Lewis Hyatt <lhy...@gmail.com>, Liaiss Merzougue
<merzou...@adacore.com>, Lili Cui <lili....@intel.com>, Lulu Cheng
<chengl...@loongson.cn>, Maciej W. Rozycki <ma...@embecosm.com>, Marc Poulhiès
<poulh...@adacore.com>, Marcel Vollweiler <mar...@codesourcery.com>, Marek
Polacek <pola...@redhat.com>, Martin Jambor <mjam...@suse.cz>, Martin Liska
<mli...@suse.cz>, Max Filippov <jcmvb...@gmail.com>, Michael Collison
<colli...@rivosinc.com>, Nathan Sidwell <nat...@acm.org>, Nathaniel Shead
<nathanielosh...@gmail.com>, Patrick Bernardi <berna...@adacore.com>, Patrick
Palka <ppa...@redhat.com>, Paul Thomas <pa...@gcc.gnu.org>, Paul-Antoine Arras
<p...@codesourcery.com>, Philipp Tomsich <philipp.toms...@vrull.eu>, Piotr
Trojanek <troja...@adacore.com>, Prathamesh Kulkarni
<prathamesh.kulka...@linaro.org>, Qing Zhao <qing.z...@oracle.com>, Quentin
Ochem <oc...@adacore.com>, Rainer Orth <r...@cebitec.uni-bielefeld.de>, Ramana
Radhakrishnan <ramana....@gmail.com>, Rasmus Villemoes
<r...@rasmusvillemoes.dk>, Richard Biener <rguent...@suse.de>, Richard Purdie
<richard.pur...@linuxfoundation.org>, Ronan Desplanques
<desplanq...@adacore.com>, Sam James <s...@gentoo.org>, Sandra Loosemore
<san...@codesourcery.com>, Scott Snyder <s...@li-snyder.org>, Sebastian Huber
<sebastian.hu...@embedded-brains.de>, Sebastian Pop <s...@amazon.com>, Siddhesh
Poyarekar <siddh...@gotplt.org>, Sinan <sinan....@linux.alibaba.com>, Srinath
Parvathaneni <srinath.parvathan...@arm.com>, Stam Markianos-Wright
<stam.markianos-wri...@arm.com>, Steve Baird <ba...@adacore.com>, Steve Kargl
<ka...@gcc.gnu.org>, Surya Kumari Jangala <jskum...@linux.ibm.com>, Tamar
Christina <tamar.christ...@arm.com>, Thomas Schwinge <tho...@codesourcery.com>,
Tobias Burnus <tob...@codesourcery.com>, Torbjörn SVENSSON
<torbjorn.svens...@foss.st.com>, Uros Bizjak <ubiz...@gmail.com>, Vladimir N.
Makarov <vmaka...@redhat.com>, Weimin Pan <weimin....@oracle.com>, Wilco
Dijkstra <wdijk...@arm.com>, Wilco Dijkstra <wilco.dijks...@arm.com>, Will
Hawkins <wh...@obs.cr>, Xi Ruoyao <xry...@xry111.site>, Xionghu Luo
<xionghu...@tencent.com>, Yannick Moy <m...@adacore.com>, Yixuan Chen
<chenyix...@iscas.ac.cn>, YunQiang Su <yunqiang...@cipunited.com>, Yuri Gribov
<y.gri...@samsung.com>, bors[bot]
<26634292+bors[bot]@users.noreply.github.com>, konglin1
<lingling.k...@intel.com>, liuhongt <hongtao....@intel.com>, mtsamis
<manolis.tsa...@vrull.eu>
Steps:
- 0: worker_preparation ( success )
- 1: git checkout ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/146/builds/330/steps/1/logs/stdio
- 2: rm -rf gccrs-build ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/146/builds/330/steps/2/logs/stdio
- 3: configure ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/146/builds/330/steps/3/logs/stdio
- 4: make ( warnings )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/146/builds/330/steps/4/logs/stdio
- warnings (33):
https://builder.sourceware.org/buildbot/#builders/146/builds/330/steps/4/logs/warnings__33_
- 5: make check ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/146/builds/330/steps/5/logs/stdio
- rust.sum:
https://builder.sourceware.org/buildbot/#builders/146/builds/330/steps/5/logs/rust_sum
- rust.log:
https://builder.sourceware.org/buildbot/#builders/146/builds/330/steps/5/logs/rust_log
- 6: grep unexpected rust.sum ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/146/builds/330/steps/6/logs/stdio
- 7: prep ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/146/builds/330/steps/7/logs/stdio
- 8: build bunsen.cpio.gz ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/146/builds/330/steps/8/logs/stdio
- 9: fetch bunsen.cpio.gz ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/146/builds/330/steps/9/logs/stdio
- 10: unpack bunsen.cpio.gz ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/146/builds/330/steps/10/logs/stdio
- 11: pass .bunsen.source.gitname ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/146/builds/330/steps/11/logs/stdio
- 12: pass .bunsen.source.gitdescribe ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/146/builds/330/steps/12/logs/stdio
- 13: pass .bunsen.source.gitbranch ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/146/builds/330/steps/13/logs/stdio
- 14: pass .bunsen.source.gitrepo ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/146/builds/330/steps/14/logs/stdio
- 15: upload to bunsen ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/146/builds/330/steps/15/logs/stdio
- 16: clean up ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/146/builds/330/steps/16/logs/stdio
- 17: rm -rf gccrs-build_1 ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/146/builds/330/steps/17/logs/stdio
A restored build has been detected on builder gccrust-fedora-arm64 while
building gccrust.
Full details are available at:
https://builder.sourceware.org/buildbot/#builders/179/builds/306
Build state: build successful
Revision: fe648fb91c51cb477cf0380105c0bb85796be2df
Worker: fedora-arm64
Build Reason: (unknown)
Blamelist: Aldy Hernandez <al...@redhat.com>, Alex Coplan
<alex.cop...@arm.com>, Alexander Monakov <amona...@ispras.ru>, Alexandre Oliva
<ol...@adacore.com>, Andre Vieira <andre.simoesdiasvie...@arm.com>, Andrea
Corallo <andrea.cora...@arm.com>, Andrew Carlotti <andrew.carlo...@arm.com>,
Andrew MacLeod <amacl...@redhat.com>, Andrew Pinski <apin...@marvell.com>,
Andrew Pinski <pins...@gmail.com>, Andrew Stubbs <a...@codesourcery.com>,
Antoni Boucher <boua...@zoho.com>, Arnaud Charlet <char...@adacore.com>, Arsen
Arsenović <ar...@aarsen.me>, Arthur Cohen <arthur.co...@embecosm.com>, Bernhard
Reutner-Fischer <al...@gcc.gnu.org>, Bernhard Reutner-Fischer
<rep.dot....@gmail.com>, Björn Schäpers <bjo...@hazardy.de>, Bob Duff
<d...@adacore.com>, Boris Yakobowski <yakobow...@adacore.com>, Cedric Landet
<lan...@adacore.com>, Cesar Philippidis <ce...@codesourcery.com>,
Charles-François Natali <cf.nat...@gmail.com>, Christoph Müllner
<christoph.muell...@vrull.eu>, Christophe Lyon <christophe.l...@arm.com>,
Claire Dross <dr...@adacore.com>, David Faust <david.fa...@oracle.com>, David
Malcolm <dmalc...@redhat.com>, David Seifert <s...@gentoo.org>, Dimitar
Dimitrov <dimi...@dinux.eu>, Eric Botcazou <ebotca...@adacore.com>, Eric
Gallager <egalla...@gcc.gnu.org>, Eugene Rozenfeld <ero...@microsoft.com>, Fei
Gao <gao...@eswincomputing.com>, Florian Weimer <fwei...@redhat.com>, François
Dumont <fdum...@gcc.gnu.org>, Frolov Daniil <frolov...@phystech.edu>, GCC
Administrator <gccad...@gcc.gnu.org>, Gaius Mulley <gaiusm...@gmail.com>, Gary
Dismukes <dismu...@adacore.com>, Ghjuvan Lacambre <lacam...@adacore.com>, H.J.
Lu <hjl.to...@gmail.com>, Hans-Peter Nilsson <h...@axis.com>, Haochen Gui
<guih...@gcc.gnu.org>, Haochen Jiang <haochen.ji...@intel.com>, Harald Anlauf
<anl...@gmx.de>, Hongyu Wang <hongyu.w...@intel.com>, Hu, Lin1
<lin1...@intel.com>, Iain Buclaw <ibuc...@gdcproject.org>, Iain Sandoe
<i...@sandoe.co.uk>, Ian Lance Taylor <i...@golang.org>, Iskander Shakirzyanov
<iskan...@ispras.ru>, Jakob Hasse <0xja...@users.noreply.github.com>, Jakub
Jelinek <ja...@redhat.com>, Jason Merrill <ja...@redhat.com>, Javier Miranda
<mira...@adacore.com>, Jeff Chapman II <jchap...@lock3software.com>, Jeff Law
<jeffreya...@gmail.com>, Jeff Law <j...@ventanamicro.com>, Jia-Wei Chen
<jia...@iscas.ac.cn>, Jinyang He <hejiny...@loongson.cn>, Jiufu Guo
<guoji...@linux.ibm.com>, Joel Brobecker <brobec...@adacore.com>, Johannes
Kliemann <kliem...@adacore.com>, John David Anglin <dang...@gcc.gnu.org>,
Jonathan Wakely <jwak...@redhat.com>, Joseph Myers <jos...@codesourcery.com>,
Josue Nava Bello <n...@adacore.com>, José Rui Faustino de Sousa
<jrfso...@gmail.com>, Ju-Zhe Zhong <juzhe.zh...@rivai.ai>, Justin Squirek
<squi...@adacore.com>, Kewen Lin <li...@linux.ibm.com>, Kewen.Lin
<li...@gcc.gnu.org>, Kwok Cheung Yeung <k...@codesourcery.com>, Kyrylo Tkachov
<kyrylo.tkac...@arm.com>, Lewis Hyatt <lhy...@gmail.com>, Liaiss Merzougue
<merzou...@adacore.com>, Lili Cui <lili....@intel.com>, Lulu Cheng
<chengl...@loongson.cn>, Maciej W. Rozycki <ma...@embecosm.com>, Marc Poulhiès
<poulh...@adacore.com>, Marcel Vollweiler <mar...@codesourcery.com>, Marek
Polacek <pola...@redhat.com>, Martin Jambor <mjam...@suse.cz>, Martin Liska
<mli...@suse.cz>, Max Filippov <jcmvb...@gmail.com>, Michael Collison
<colli...@rivosinc.com>, Nathan Sidwell <nat...@acm.org>, Nathaniel Shead
<nathanielosh...@gmail.com>, Patrick Bernardi <berna...@adacore.com>, Patrick
Palka <ppa...@redhat.com>, Paul Thomas <pa...@gcc.gnu.org>, Paul-Antoine Arras
<p...@codesourcery.com>, Philipp Tomsich <philipp.toms...@vrull.eu>, Piotr
Trojanek <troja...@adacore.com>, Prathamesh Kulkarni
<prathamesh.kulka...@linaro.org>, Qing Zhao <qing.z...@oracle.com>, Quentin
Ochem <oc...@adacore.com>, Rainer Orth <r...@cebitec.uni-bielefeld.de>, Ramana
Radhakrishnan <ramana....@gmail.com>, Rasmus Villemoes
<r...@rasmusvillemoes.dk>, Richard Biener <rguent...@suse.de>, Richard Purdie
<richard.pur...@linuxfoundation.org>, Ronan Desplanques
<desplanq...@adacore.com>, Sam James <s...@gentoo.org>, Sandra Loosemore
<san...@codesourcery.com>, Scott Snyder <s...@li-snyder.org>, Sebastian Huber
<sebastian.hu...@embedded-brains.de>, Sebastian Pop <s...@amazon.com>, Siddhesh
Poyarekar <siddh...@gotplt.org>, Sinan <sinan....@linux.alibaba.com>, Srinath
Parvathaneni <srinath.parvathan...@arm.com>, Stam Markianos-Wright
<stam.markianos-wri...@arm.com>, Steve Baird <ba...@adacore.com>, Steve Kargl
<ka...@gcc.gnu.org>, Surya Kumari Jangala <jskum...@linux.ibm.com>, Tamar
Christina <tamar.christ...@arm.com>, Thomas Schwinge <tho...@codesourcery.com>,
Tobias Burnus <tob...@codesourcery.com>, Torbjörn SVENSSON
<torbjorn.svens...@foss.st.com>, Uros Bizjak <ubiz...@gmail.com>, Vladimir N.
Makarov <vmaka...@redhat.com>, Weimin Pan <weimin....@oracle.com>, Wilco
Dijkstra <wdijk...@arm.com>, Wilco Dijkstra <wilco.dijks...@arm.com>, Will
Hawkins <wh...@obs.cr>, Xi Ruoyao <xry...@xry111.site>, Xionghu Luo
<xionghu...@tencent.com>, Yannick Moy <m...@adacore.com>, Yixuan Chen
<chenyix...@iscas.ac.cn>, YunQiang Su <yunqiang...@cipunited.com>, Yuri Gribov
<y.gri...@samsung.com>, bors[bot]
<26634292+bors[bot]@users.noreply.github.com>, konglin1
<lingling.k...@intel.com>, liuhongt <hongtao....@intel.com>, mtsamis
<manolis.tsa...@vrull.eu>
Steps:
- 0: worker_preparation ( success )
- 1: git checkout ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/179/builds/306/steps/1/logs/stdio
- 2: rm -rf gccrs-build ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/179/builds/306/steps/2/logs/stdio
- 3: configure ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/179/builds/306/steps/3/logs/stdio
- 4: make ( warnings )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/179/builds/306/steps/4/logs/stdio
- warnings (35):
https://builder.sourceware.org/buildbot/#builders/179/builds/306/steps/4/logs/warnings__35_
- 5: make check ( warnings )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/179/builds/306/steps/5/logs/stdio
- rust.sum:
https://builder.sourceware.org/buildbot/#builders/179/builds/306/steps/5/logs/rust_sum
- rust.log:
https://builder.sourceware.org/buildbot/#builders/179/builds/306/steps/5/logs/rust_log
- warnings (6):
https://builder.sourceware.org/buildbot/#builders/179/builds/306/steps/5/logs/warnings__6_
- 6: grep unexpected rust.sum ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/179/builds/306/steps/6/logs/stdio
- 7: prep ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/179/builds/306/steps/7/logs/stdio
- 8: build bunsen.cpio.gz ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/179/builds/306/steps/8/logs/stdio
- 9: fetch bunsen.cpio.gz ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/179/builds/306/steps/9/logs/stdio
- 10: unpack bunsen.cpio.gz ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/179/builds/306/steps/10/logs/stdio
- 11: pass .bunsen.source.gitname ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/179/builds/306/steps/11/logs/stdio
- 12: pass .bunsen.source.gitdescribe ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/179/builds/306/steps/12/logs/stdio
- 13: pass .bunsen.source.gitbranch ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/179/builds/306/steps/13/logs/stdio
- 14: pass .bunsen.source.gitrepo ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/179/builds/306/steps/14/logs/stdio
- 15: upload to bunsen ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/179/builds/306/steps/15/logs/stdio
- 16: clean up ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/179/builds/306/steps/16/logs/stdio
- 17: rm -rf gccrs-build_1 ( success )
Logs:
- stdio:
https://builder.sourceware.org/buildbot/#builders/179/builds/306/steps/17/logs/stdio
--
Gcc-rust mailing list
Gcc-rust@gcc.gnu.org
https://gcc.gnu.org/mailman/listinfo/gcc-rust
