I don't think the bracket is missing from the end...my
json_encode.php(having to use this- provided- as client is using php4 and
can't use the built-in json_encode function) has:
if ($isList)
{
foreach ($a as $v) $result[] = json_encode($v);
return '[' . join(',', $result) . ']';
}
I only copied part of the result as there is too much data to display. I
think there is about 256 rows.
Could something be truncating the result and thus meaning no end bracket?
Meerkat.
> -----Original Message-----
> From: [email protected] [mailto:[email protected]]
> On Behalf Of Oblygre
> Sent: Thursday, February 19, 2009 6:14 PM
> To: Gears Users
> Subject: [gears-users] Re: serverresponse
>
>
> There is missing on end bracket ] in you data....
> Try to locate it.
> Here is the def: http://www.json.org/
>
> On Feb 19, 4:44 pm, "meerkat" <[email protected]> wrote:
> > In the catch statement which is now:
> > try
> > {
> > eval("dataarr="+message.body);
> > wp.sendMessage("Valid data found, start adding to local
> db");
> > }
> > catch (ex)
> > {
> > wp.sendMessage("Error Tosca: No valid data found. Data
> > was:"+message.body,message.sender);
> >
> > I thought it looked valid data too.:-(
> >
> >
> >
> > > -----Original Message-----
> > > From: [email protected] [mailto:gears-
> [email protected]]
> > > On Behalf Of Oblygre
> > > Sent: Thursday, February 19, 2009 2:08 PM
> > > To: Gears Users
> > > Subject: [gears-users] Re: serverresponse
> >
> > > You data look valid.
> > > Where is you wp.sendMessage located which shows this message?
> > > and did you fix this (shown under) as described earlier? If its coming
> > > from this, I understand, otherwise I don't have a clue.
> > > **from Feb 18, 8:31 pm ********************
> > > And here, no error but a wrong feedback to the user:
> > > eval("dataarr="+serverresponse);
> > > wp.sendMessage("Error: No valid data found. Data
> > > was:"+serverresponse,message.sender); //This line is only executed if
> > > the eval goes ok, so it should return some ok status like "Valid data
> > > found, start adding to local db"
> > > **********************
> > > On Feb 19, 10:21 am, "meerkat" <[email protected]> wrote:
> > > > Hello,
> > > > Now getting the message:
> > > > Error: No valid data found. Data
> >
> > >
> was:[{"order_id":"033665136312108","order_no":"10000","order_no_iteration"
> > > :"
> >
> > >
> 1","estimated_completion_date":"1211491800","other_contact_tel":"077100826
> > > 29
> >
> > >
> "},{"order_id":"720448404212108","order_no":"10001","order_no_iteration":"
> > > 1"
> > > > ,"estimated_completion_date":"1210894200","other_contact_tel":""},{"
> orde
> > > r_id
> >
> > >
> ":"469387193612108","order_no":"10002","order_no_iteration":"1","estimated
> > > _c
> > > > ompletion_date":"1211491800","other_contact_tel":"07710082629"}
> >
> > > > What do I need to do to make data valid?
> > > > Thanks, meerkat.
> >
> > > > > -----Original Message-----
> > > > > From: [email protected] [mailto:gears-
> > > [email protected]]
> > > > > On Behalf Of Oblygre
> > > > > Sent: Thursday, February 19, 2009 6:45 AM
> > > > > To: Gears Users
> > > > > Subject: [gears-users] Re: serverresponse
> >
> > > > > You can remove the if(1) construct, it dosen't do anything....
> >
> > > > > try change
> > > > > wp.sendMessage("Error in workerPool: "+errorObject.message+" on
> > > > > line"+errorObject.lineNumber,message.sender); And get " message
> is
> > > > > not
> > > > > defined"
> > > > > to
> > > > > wp.sendMessage("Error in workerPool",message.sender);
> >
> > > > > Im my last response I asked to you remove the serverresponse and
> > > > > replace with message.body
> > > > > Try that
> >
> > > > > On Feb 18, 10:58 pm, "meerkat" <[email protected]> wrote:
> > > > > > Tried wp.sendMessage("Error in workerPool:
> > > "+errorObject.message+" on
> > > > > > line"+errorObject.lineNumber,message.sender); And get " message
> is
> > > not
> > > > > > defined"
> > > > > > Still get "serverresponse is not defined" in-
> > > > > > catch (ex)
> > > > > > {
> > > > > > wp.sendMessage("Error: No valid data found. Data
> > > > > > was:"+serverresponse,message.sender);
> >
> > > > > > return;
> > > > > > }
> > > > > > Thanks.
> >
> > > > > > What is if(1) testing by the way?
> >
> > > > > > > -----Original Message-----
> > > > > > > From: [email protected] [mailto:gears-
> > > > > [email protected]]
> > > > > > > On Behalf Of Oblygre
> > > > > > > Sent: Wednesday, February 18, 2009 9:19 PM
> > > > > > > To: Gears Users
> > > > > > > Subject: [gears-users] Re: serverresponse
> >
> > > > > > > Replace your
> > > > > > > alert("Error in workerPool: "+errorObject.message+" on
> > > > > > > line"+errorObject.lineNumber);
> > > > > > > with
> > > > > > > wp.sendMessage("Error in workerPool:
> "+errorObject.message+" on
> > > > > > > line"+errorObject.lineNumber,message.sender);
> >
> > > > > > > The next I don't understand, but we can try
> > > > > > > commenting out
> > > > > > > // var serverresponse= message.body;
> > > > > > > and
> > > > > > > try change
> > > > > > > eval("dataarr="+serverresponse);
> > > > > > > to
> > > > > > > eval("dataarr="+message.body);
> >
> > > > > > > Another thing:
> > > > > > > The
> > > > > > > if (1)
> > > > > > > {
> > > > > > > construct can be removed...
> >
> > > > > > > Br
> >
> > > > > > > Olav
> > > > > > > On Feb 18, 9:43 pm, "meerkat" <[email protected]> wrote:
> > > > > > > > Thanks Olav for taking the time to help me.
> > > > > > > > I now have 2 errors in databaseworker.js:
> > > > > > > > "alert is not defined" at-
> > > > > > > > wp.onerror = function(errorObject)
> > > > > > > > {
> > > > > > > > alert("Error in workerPool:
> "+errorObject.message+" on
> > > > > > > > line"+errorObject.lineNumber);
> > > > > > > > };
> >
> > > > > > > > And: "serverresponse is not defined" at -
> > > > > > > > catch (ex)
> > > > > > > > {
> > > > > > > > wp.sendMessage("Error: No valid data found. Data
> > > > > > > > was:"+serverresponse,message.sender);
> >
> > > > > > > > return;
> > > > > > > > }
> >
> > > > > > > > What should I change?
> > > > > > > > meerkat
> >
> > > > > > > > > -----Original Message-----
> > > > > > > > > From: [email protected] [mailto:gears-
> > > > > > > [email protected]]
> > > > > > > > > On Behalf Of Oblygre
> > > > > > > > > Sent: Wednesday, February 18, 2009 7:32 PM
> > > > > > > > > To: Gears Users
> > > > > > > > > Subject: [gears-users] Re: serverresponse
> >
> > > > > > > > > A quick answer:
> > > > > > > > > In databaseworker.js:
> > > > > > > > > What is ex.message? I think your error is here:
> > > > > > > > > line: wp.sendMessage(ex.message,message.sender);
> > > > > > > > > Try replace this line with
> > > > > > > > > wp.sendMessage("Error: No valid data found. Data
> > > > > > > > > was:"+serverresponse,message.sender);
> >
> > > > > > > > > And here, no error but a wrong feedback to the user:
> > > > > > > > > eval("dataarr="+serverresponse);
> > > > > > > > > wp.sendMessage("Error: No valid data found. Data
> > > > > > > > > was:"+serverresponse,message.sender); //This line is only
> > > > > executed if
> > > > > > > > > the eval goes ok, so it should return some ok status like
> > > "Valid
> > > > > data
> > > > > > > > > found, start adding to local db"
> >
> > > > > > > > > Try and report back...
> >
> > > > > > > > > Sorry for my late reply, I been very busy lately...
> >
> > > > > > > > > Olav
> >
> > > > > > > > > On Feb 18, 2:23 pm, "meerkat" <[email protected]> wrote:
> > > > > > > > > > Have you had a chance to look at the serverresponse code
> > yet?
> > > I
> > > > > am
> > > > > > > still
> > > > > > > > > > stuck :-(
> > > > > > > > > > Thanks.
> >
> > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > From: [email protected] [mailto:gears-
> > > > > > > > > [email protected]]
> > > > > > > > > > > On Behalf Of meerkat
> > > > > > > > > > > Sent: Tuesday, February 17, 2009 10:14 AM
> > > > > > > > > > > To: [email protected]
> > > > > > > > > > > Subject: [gears-users] Re: workerpool messages
> >
> > > > > > > > > > > And here is the code from the php page that creates
> the
> > > json:
> >
> > > > > > > > > > > while($obj = mysql_fetch_object($rs))
> > > > > > > > > > > {
> > > > > > > > > > > $arr[] = $obj;
> >
> > > > > > > > > > > }
> > > > > > > > > > > $serverresponse = json_encode($arr);
> > > > > > > > > > > echo $serverresponse;
> >
> > > > > > > > > > > ( I am having to use php4)
> >
> > > > > > > > > > > Thanks
> >
> > > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > > From: [email protected] [mailto:gears-
> > > > > > > > > [email protected]]
> > > > > > > > > > > > On Behalf Of Oblygre
> > > > > > > > > > > > Sent: Tuesday, February 17, 2009 8:12 AM
> > > > > > > > > > > > To: Gears Users
> > > > > > > > > > > > Subject: [gears-users] Re: workerpool messages
> >
> > > > > > > > > > > > Please post the relevant code so its easier for us
> to
> > > help
> > > > > you
> > > > > > > > > > > > :--))))))))))
> > > > > > > > > > > > Olav
> >
> > > > > > > > > > > > On Feb 16, 12:36 pm, "meerkat" <[email protected]>
> wrote:
> > > > > > > > > > > > > Hi,
> > > > > > > > > > > > > In my main Gears file I have "alert(data);" and
> the
> > > > > correct
> > > > > > > data
> > > > > > > > > is
> > > > > > > > > > > > there. I
> > > > > > > > > > > > > get the message "Status: "36117 byte(s) read from
> main
> > > DB,
> > > > > > > adding
> > > > > > > > > data
> > > > > > > > > > > > to
> > > > > > > > > > > > > local DB".
> >
> > > > > > > > > > > > > Where do I set " var serverresponse=message.body;"
> If
> > > I
> > > > > put it
> > > > > > > in
> > > > > > > > > > > > > databaseworker.js I get "message is not defined"
> > error.
> > > > > > > > > > > > > Thanks, meerkat
> >
> > > > > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > > > > From: [email protected]
> [mailto:gears-
> > > > > > > > > > > > [email protected]]
> > > > > > > > > > > > > > On Behalf Of Oblygre
> > > > > > > > > > > > > > Sent: Monday, February 16, 2009 6:03 AM
> > > > > > > > > > > > > > To: Gears Users
> > > > > > > > > > > > > > Subject: [gears-users] Re: workerpool messages
> >
> > > > > > > > > > > > > > You get the error beacuse data in your
> > > serverresponse
> > > > > > > variable
> > > > > > > > > > > > > > contains not valid json data.
> > > > > > > > > > > > > > Try
> > > > > > > > > > > > > > wp.sendMessage("Error: No valid data found. Data
> > > > > > > > > > > > > > was:"+serverresponse,message.sender);
> > > > > > > > > > > > > > to have a look at the data your getting.
> > > > > > > > > > > > > > Serverresponse varaiable must be set to the
> recived
> > > data
> > > > > > > from
> > > > > > > > > the
> > > > > > > > > > > > > > parent script.
> > > > > > > > > > > > > > In my example over, serverresponse must be set
> to
> > > > > > > message.body
> > > > > > > > > > > > > > var serverresponse=message.body;
> >
> > > > > > > > > > > > > > On Feb 15, 8:01 pm, "meerkat" <[email protected]>
> > > wrote:
> > > > > > > > > > > > > > > OK, now getting wp messages on screen.
> > > > > > > > > > > > > > > In main html file I am getting "undefined" for
> > > > > > > > > > > > > > "workerPool.sendMessage(data,
> > > > > > > > > > > > > > > childWorkerId)".
> >
> > > > > > > > > > > > > > > I have done, for testing purposes,
alert(data);
> > > and
> >
> > > > > > > > > > > > > alert(childWorkerId);
> >
> > > > > > > > > > > > > > > and they are returning the correct values
> > > > individually.
> > > > > So
> >
> > ...
> >
> > read more »
