That depends on whether you are going to re-use
them. They cut very easily with a utility knife.
The other way is to run a putty knife between the
glass and the plastic all the way around, breaking
the silicon glue bond (which isn't real strong),
then with a little wiggle and pull, you can
usually just pry it up easily. Beware that you
loose a lot of structural integrity without the
plastic angle, be careful it does not come apart,
especially if you move it.
--
Regards...
|===================>
Chuck Snyder
Pittsburgh PA, USA
Rhac 'n Roll
<http://home.netcom.com/~deadrats/h.htm>
GGA <http://www.gekkota.com>
###########################################################################
THE GLOBAL GECKO ASSOCIATION LISTSERV
WebSite: www.gekkota.com Archive: [EMAIL PROTECTED]/
The GGA takes no responsibility for the contents of these postings.
###########################################################################
