On Mon, 2007-11-26 at 19:53 -0500, Ales Hvezda wrote: > > At the FreeDog meeting, it was mentioned that there'd be a new stable & > > unstable release soon(ish). > > > > Is there a timescale for this actually happening? > > > > *pokes Ales* > > Right now I am highly time constrained. I am hoping that once my > immediate time constrains are gone (by 12/13 or so), I should have > a ton more time to work on some releases. > > However, while I'm here, I've been playing with gaf master and noticed > the following: > > 1) run gschem > 2) place a component say 7400-1.sym > 3) Mirror the above component > 4) save the schematic and exit gschem > 5) launch gschem using the saved schematic and move or copy the component > 6) save the schematic and exit gschem > > Look at the schematic and notice the coords on the component are > incorrect. I know this used to work. :)
Gah, almost certainly my fault... I see the symptom, and I know roughly where to start looking. I'll fix it unless anyone beats me to it. -- Peter Clifton Electrical Engineering Division, Engineering Department, University of Cambridge, 9, JJ Thomson Avenue, Cambridge CB3 0FA Tel: +44 (0)7729 980173 - (No signal in the lab!) _______________________________________________ geda-dev mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-dev
