I got this error running PCB under valgrind, when placing an AMP_MICTOR_767054_4.fp
==22978== Source and destination overlap in memcpy(0x89BFE70, 0x89BFE70, 300) ==22978== at 0x4024346: memcpy (mc_replace_strmem.c:116) ==22978== by 0x806FC26: MoveElementToBuffer (buffer.c:441) ==22978== by 0x80C79C4: MoveObjectToRemoveUndoList (undo.c:1213) ==22978== by 0x80B777E: RemoveElement (remove.c:526) ==22978== by 0x80B6B8D: RemoveObject (remove.c:556) ==22978== by 0x80607E6: NotifyMode (action.c:1520) ==22978== by 0x8061EFC: ActionMode (action.c:3061) ==22978== by 0x80CAF63: hid_actionv (actions.c:219) ==22978== by 0x80CAB1E: hid_parse_actions (actions.c:287) ==22978== by 0x80E6EE1: ghid_menu_cb (gui-top-window.c:629) ==22978== by 0x46F4C08: g_cclosure_marshal_VOID__VOID (gmarshal.c:77) ==22978== by 0x46E7771: g_closure_invoke (gclosure.c:490) (This was with the old library window code). I take it by valgrind's complaint, that this is a bad thing. Best wishes, -- Peter Clifton Electrical Engineering Division, Engineering Department, University of Cambridge, 9, JJ Thomson Avenue, Cambridge CB3 0FA Tel: +44 (0)7729 980173 - (No signal in the lab!) _______________________________________________ geda-dev mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-dev
