I fixed one problem and the symbol looks better. Use the attached Symbol instead.
I think that gschem adds the pin number to the pin for the schematic,
and assumes the angle is always 0, instead of using the angle from the
pinnumber.
I have not dove into the source for gschem but that is my first guess.
Can anyone verify this?
Kip
On Sun, 2008-10-05 at 17:55 -0500, Kipton Moravec wrote:
> v 20050313 1
> T 0 -420 8 10 0 0 270 0 1
> parts=1
> T 4700 11250 8 21 1 1 270 0 1
> device=AT32AP7000
> T 3200 10650 8 17 1 1 270 0 1
> value=32-BIT MICROCONTROLLER
> T 5250 10060 8 17 1 1 270 0 1
> footprint=CTBGA256
> T 5750 9440 8 25 1 1 270 0 1
> refdes=U?
> P 8100 20150 8100 19950 1 0 0
> {
> T 8170 20370 5 10 0 0 270 1 1
> pintype=in
> T 8100 19950 5 10 0 1 270 6 1
> pinseq=1
> T 8100 19950 5 10 0 1 270 6 1
> pinnumber=T16
> T 8100 19950 5 10 1 1 270 1 1
> pinlabel=VDDIO14
> }
>
> This is the start of a symbol file. I do not understand why I see a T16
> on my pin.
>
> Currently I have visibility turned off for pinnumber=T16
> And the T16 at 270 degrees is not showing up. But there is another T16
> at 0 degrees that persists.
>
> The T16 at 0 degrees runs into the other 0 degree pin labels and makes a
> mess.
> All my pins have two instances of the pinnumber being displayed.
>
> I searched the file for another instance of T16 and it does not appear
> in my file.
>
> Attached is the whole symbol file. (with T16 at 270 Degrees turned off).
> It is on the top line.
>
> Any ideas? Assume that I do not know what I am doing.
>
> I am using convert_sym to convert the symbols from ViewDraw to gEDA. I
> will fix convert_sym if I know what it should be.
>
> Could someone open this up in a schematic and verify you are seeing the
> same thing I am seeing, so I will know if it is something with my gschem
> or with the symbol.
>
>
>
> _______________________________________________
> geda-dev mailing list
> [email protected]
> http://www.seul.org/cgi-bin/mailman/listinfo/geda-dev
--
Kipton Moravec AE5IB
"Always do right; this will gratify some people and astonish the rest."
--Mark Twain
at32ap7000-1.sym
Description: application/geda-schematic
_______________________________________________ geda-dev mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-dev
