George
On Wed, 2006-07-26 at 23:07 -0500, John Griessen wrote:
Yep. Speed of getting a new rev. is about the only motivation with those prices George put out from the per square inch shops. After I get my prototype iterating done and the design/test process slows down, I'm trying a Hong Kong fab shop that sent me some FR-1 to experiment with EZ drilling and EZ bake conductive ink jumpers before getting FR-4 boards made for production. 2 layers? Only with additive conductive ink and SMT jumpers. 3 layers and up? Maybe some conductive ink ground planes for opposite side. striplines? nahhh.... I'll hire a fab shop. John G John Luciani wrote: > On 7/26/06, Dan McMahill <[EMAIL PROTECTED]> wrote: I could easily >> see it getting somewhat close or maybe close enough to where the time >> spent etching your own covers the rest of the cost of having the board >> made by a real board house. > > Don't forget the time spent drilling out for any through-hole components > and the time spent installing jumper vias. > > (* jcl *) > _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
_______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
