I wished I needed it for its intended purpose. The only success I had was with single sided 0.031
panels. Getting more heat and less pressure might improve the results. I use the blue Press-n-Peel
transfer film which may contribute to my poor results as it tends to move around until the ink sets.
George
On Thu, 2006-07-27 at 13:26 -0500, John Griessen wrote:
Here's a detailed description of using photo printing paper (Epson or Staples) to make a transfer of etch resist from the laser printer toner. http://www.fullnet.com/u/tomg/gooteepc.htm Besides an iron, a pouch laminating heater-roller machine is good for this. John G Igor2 wrote: > Well, many problems, and probably it won't work for the first try, but > once you learn the settings of the printer, the temperature of the iron, > the quality of the paper, it's a nice method for hobby projects :) _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
_______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
