Hello, there exists a few footprints which define mounting holes with 0x09 id. This seems to indicate a mounting hole without copper area and is used for example for the CON_USB_TYPEB__Keystone_924 connector created by John Luciani:
Element[0x0 "CON_USB_TYPEB__Keystone_924" "" "" 23700 59000 0 -7000 0 100 0x0] ( Pin[18800 59000 6600 2000 8600 4600 "" "1" 0x01] Pin[28600 59000 6600 2000 8600 4600 "" "2" 0x01] Pin[28600 51200 6600 2000 8600 4600 "" "3" 0x01] Pin[18800 51200 6600 2000 8600 4600 "" "4" 0x01] Pin[0 40500 11000 2000 13000 11000 "" "5" 0x09] Pin[47400 40500 11000 2000 13000 11000 "" "6" 0x09] ElementLine[0 34500 0 0 1000] ElementLine[0 0 47400 0 1000] ElementLine[47400 0 47400 34500 1000] ElementLine[0 46500 0 64000 1000] ElementLine[0 64000 47400 64000 1000] ElementLine[47400 64000 47400 46500 1000] ElementArc[0 40500 6000 6000 0 360 1000] ElementArc[47400 40500 6000 6000 0 360 1000] ) Datasheet of this device is: http://www.keyelco.com/products/specs/spec144.asp Is this type of mounting hole for fixating the device without soldering? (Only bending the metal?) Best regards Stefan Salewski _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
