DJ Delorie <[EMAIL PROTECTED]> writes: > http://www.delorie.com/house/furnace/pcb2/
So far, everything is working just fine. I'll probably end up tweaking some of the LEDs' resistors to get the apparent intensity consistent, but so far all the functionality is there. I've got blinky lights! (see photo). The folks at Acon offered to tweak my power modules for the higher voltage, which is cool. For now, it's plugged in to a 5v power supply. Tested so far: * bulk power supply works (24vac -> 36vdc) * AC sensor opto works (checked with scope) * gumstix boots * serial level converter works * in-circuit programming works (all five chips) * all R8C's run * all LEDs light up Still haven't tested the i2c bus, triac drivers, or I/O modules. After that, I get to spend some quality time writing software. _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
