joe tarantino wrote:
On 3/7/07, *Peter Baxendale* <[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>> wrote:
On Tue, 2007-03-06 at 22:02 -0800, Dave N6NZ wrote:
> What is the easiest way to create "thermal vias"? Not a via with a
> thermal relief -- I can do that :) .. but a via with no thermal
relief
> punched into polygons on both sides of the board that ends up getting
> filled with solder to help create a large thermal mass to be used
as a
> heat sink.
I thought you just put a thermal relief on the via and then shift
clicked on it to cycle through to the one with no relief. Or isn't that
what you meant?
_______________________________________________
geda-user mailing list
[email protected] <mailto:[email protected]>
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
<http://www.seul.org/cgi-bin/mailman/listinfo/geda-user>
Depends on how new your version of PCB is. Peter's suggestion is
appropriate for recent releases since this feature was added not too
long ago. I'm running 20060822. If Dave is using an older
version, then my suggestion is appropriate.
Ahhh... that answers my question. Time to update.
-dave
Joe T
------------------------------------------------------------------------
_______________________________________________
geda-user mailing list
[email protected]
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
_______________________________________________
geda-user mailing list
[email protected]
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
