Stuart,
Thanks for the quick response.
I checked my system and libxaw7 is installed. There is a package called
libxaw7-dev that is not installed; could this be the problem?
I don't know whether Debian removed bzlib recently or not but I can get it
installed I think.
Once these dependency issues are solved, how should I go about reinstalling
ngspice and icarus verilog? Can I simply rerun the installer and it will
figure out which is already installed correctly? ngspice doesn't seem to
have any files under bin. There are couple iverilog files under bin so it
seems it was partially installed. Should I delete the verilog binaries?
Ed
----- Original Message -----
From: "Stuart Brorson" <[EMAIL PROTECTED]>
To: "gEDA user mailing list" <[email protected]>
Sent: Tuesday, May 08, 2007 9:01 AM
Subject: Re: gEDA-user: Install Log
Thanks for the report. Here are the two failures I found:
Ngspice:
-----------------------------------------------------------
/home/ed/gEDA/geda-sources/ngspice/ng-spice-rework-17
./configure --prefix=/home/ed/gEDA/geda-install --enable-xspice
--with-readline=yes
[.... snip! ....]
checking for main in -lXaw... no
configure: error: Couldn't find Xaw library
------------------------------------------------------------
This one is very strange! AFAIK, the Xaw library is a base library
used for X windows. Why is this missing from Debian? I don't know
what to tell you......
Icarus Verilog:
-------------------------------------------------------------
[.... snip! .....]
make install
for dir in vvp vpi tgt-stub tgt-null tgt-vvp libveriuser cadpli; do (cd
$dir ; make all); done
make[1]: Entering directory
`/home/ed/gEDA/geda-sources/icarus/verilog-20061210/vvp'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory
`/home/ed/gEDA/geda-sources/icarus/verilog-20061210/vvp'
make[1]: Entering directory
`/home/ed/gEDA/geda-sources/icarus/verilog-20061210/vpi'
gcc -DHAVE_CVS_IDENT=1 -I. -I./.. -I. -I.. -D_LARGEFILE_SOURCE=1
-D_FILE_OFFSET_BITS=64 -DHAVE_CONFIG_H -fPIC -Wall -g -O2 -MD -c
sys_lxt.c
-o sys_lxt.o
In file included from sys_lxt.c:24:
lxt_write.h:33:19: bzlib.h: No such file or directory
sys_lxt.c: In function `install_dumpvars_callback':
sys_lxt.c:296: warning: long unsigned int format, different type arg (arg
3)
make[1]: *** [sys_lxt.o] Error 1
make[1]: Leaving directory
`/home/ed/gEDA/geda-sources/icarus/verilog-20061210/vpi'
----------------------------------------------------------------
You system is lacking the bzlib (a library used for compression). I
suggest Googling around to see if you can find it and install it.
I don't know if the error in sys_lxt is caused by the missing bzlib or
somethign else.
Maybe I need to put a dependency check into the installer for bzlib?
I haven't seen this dependency missing before? Did Debian remove this
lib? Or did Steve put a new dependency into Icarus?
Stuart
_______________________________________________
geda-user mailing list
[email protected]
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
_______________________________________________
geda-user mailing list
[email protected]
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
