> There are some pictures of my current project on the net: > http://www.cl-projects.de/projects/glcd_controller/
Inspired by the detailing around pins on that PCB, I wounder how easy it would be to make PCB output like the attached glcd-clearances.png? (This is a re-coloured zoom in on a couple of the pins from the above project). PCB's output, pcb_clearances.png shows sharp copper edges where clipping against a polygon occurs. This can often leave thin slivers of track which may / may not connect in production. If its possible to detect these thin slivers and cut them out (if below some minimum width), possible rounding their ends as shown? Regards, Peter C
<<attachment: glcd-clearances.png>>
<<attachment: pcb_clearance.png>>
_______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
