On Thu, 2008-01-31 at 16:12 -0500, Ian Chapman wrote: > Gee thanks guys. I now understand a bit about make and makefiles. I > guess when I tried to install gEDA from the tarball if you remember it > stopped as it could not find a directory. The gschem worked okay > invoked from a terminal and I have 13 pages so that was okay. I've even > got as far as importing them into PCB and looking at the footprints. In > the process redef and gsch2pcb suggested a get-apps that worked out > fine. > > I updated Peter's Makefile with > > "schematic_all_pages.ps: Sheet01.ps Sheet02.ps Sheet03.ps Sheet04.ps > Sheet05.ps Sheet06.ps Sheet07.ps Sheet08.ps Sheet09.ps Sheet10.ps > Sheet11.ps Sheet12.ps Sheet13.ps" > > and it ran through all the pages only it could not find print.scm in > directory /usr/share/gEDA/scheme/ , there is a pile of other dot.scm > files there so I guess I lost a bit form the tarball. So I'm a bit > higher on that learning curve just need to get print.scm. Ian
I lost track which gschem you're using, and whether it came from Ubuntu or the tarball. Have a look in /usr/share/gEDA/scheme/ /usr/local/share/gEDA/scheme/ ~/geda/share/gEDA/scheme/ Its odd that it isn't present.. I've attached a copy. You can run it from anywhere of course. -- Peter Clifton Electrical Engineering Division, Engineering Department, University of Cambridge, 9, JJ Thomson Avenue, Cambridge CB3 0FA Tel: +44 (0)7729 980173 - (No signal in the lab!)
;; $Id$ ;; ;; This file may be used to print gschem schematics from the ;; command line. Typical usage is: ;; ;; gschem -p -o mysch.ps -s /path/to/this/file/print.scm mysch.sch ;; ;; The schematic in "mysch.sch" will be printed to the file "mysch.ps" ;; Uncomment these to override defaults when printing from the command line ;(output-orientation "portrait") ;(output-type "limits") ;(output-color "enabled") ;(output-text "ps") ; You need call this after you call any rc file function (gschem-use-rc-values) ; filename is specified on the command line (gschem-postscript "dummyfilename") (gschem-exit)
_______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
