Some quick comments: Your holes are 35 mil, the spec says 59 mil
Inner ring is 0.28in diam, spec says 0.30in Outer ring is 0.824-0.848in diam, spec says 0.87in. Note: radial layouts like this really want to be done by a perl script or other program, which can position the pins more precisely. Even if you just have it dump the pins and you add everything else manually, it's better than doing all those pins by hand. Since the copper pads will be used for mechanical strength, make them MUCH bigger than you have. The default location for the refdes interferes with the other silk; better to move it just below pins 6/7 Your pin A seems to have a thermal to layer 9 pre-defined. You should use the Attribute() syntax to include copyright and authorship information in your element; regular comments will not be preserved in a layout. Your arcs, for some reason, have origins at various off-by-one coordinates. Note that the file format *does* allow full circles; it's only the GUI that limits you to creating 90 degree arcs. Create one arc in the GUI, and later edit the .fp file by hand to change the angles to "0 360". _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
