I haven't looked in the library, but this part should be there. Instead of looking for a TQFP, look for a QFP or a PQFP. This is an old footprint and should be very common.
If all else fails, you can download a footprint dimension library from PCB Libraries at http://www.pcblibraries.com/. The footprint you need looks to be the QFP65P1600X2200X160-100L. This does not match the height of your part, 1.6 mm vs. 1.4 mm. But otherwise has the same dimensions. Rick At 09:43 AM 5/9/2008, you wrote: >Hello, > >I need a 100-pin TQFP footprint with 0.65mm pitch: > >100-Pin Thin Plastic Quad Flat pack (14 x 20 x 1.4 mm) (51-85050) > >In datasheet > >http://download.cypress.com.edgesuite.net/design_resources/datasheets/contents/cy7c1380d_8.pdf > >is the exact dimension of land pattern not given, and I was not able to >find it somewhere else. So my home made footprint will only be an >approximation. > >Has someone the correct footprint or the exact pad dimensions? > >Thanks in advance > >Stefan Salewski > > > > >_______________________________________________ >geda-user mailing list >geda-user@moria.seul.org >http://www.seul.org/cgi-bin/mailman/listinfo/geda-user Arius - A Signal Processing Solutions Company Specializing in DSP and FPGA design URL http://www.arius.com 4 King Ave 301-682-7772 Voice Frederick, MD 21701-3110 301-682-7666 FAX _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
