http://www.delorie.com/pcb/smd-challenge/insanity_II.jpg
I kinda mangled the pads a little, but it won't matter - I can still solder them. The parts are 3x 0.5mm pitch CSP, some 0201 discretes, and an 0402 LED. The big pins are 0.1" apart. Mostly 6/6 rules (some 5 mil traces), with 13 mil holes (the big ones will get drilled out to 26 mil). The etch was done with photomasks instead of toner transfer, see [1] for details. [1] http://www.delorie.com/pcb/inkjet/ _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
