On Thu, 2008-10-23 at 21:56 +0200, Stefan Salewski wrote: > Am Donnerstag, den 23.10.2008, 15:01 +0200 schrieb Stefan Salewski: > > pcb version 20080202 GTK > > > > When I click in the drawing area with active line tool nothing visible > > happens, the thin red outlines of the trace are not drawn. After second > > mouse click trace become visible, but red outlines are still missing. > > Selecting an other tool and than selecting line tool again does not help > > -- outlines are again invisible. > > > > After some testing I find: If I select "Crosshair shows DRC clearance" > > outline is drawn again, and if I deselect this menu point, all is OK > > again. > > > > Happened just again: > > Seems not be related to undo. I was not able to enforce this bug, but > after a few hours of working it occurs. Additional observation: > The outline, which is drawn when the SEL tool is active and elements are > moved is not drawn if this bug is active. The outline of via tool (red > circle) is also broken. After selecting "Crosshair shows DRC > clearance" (and maybe deselecting again) all works again.
Note to self and other PCB developers, I wonder if the problem is that the GC used for outline drawing is getting left setup with the incorrect colour. -- Peter Clifton Electrical Engineering Division, Engineering Department, University of Cambridge, 9, JJ Thomson Avenue, Cambridge CB3 0FA Tel: +44 (0)7729 980173 - (No signal in the lab!) _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
