I'll give it a whirl! Thanks, Ethan
Steve Meier wrote: > A demonstration of why one should do a minimal test before sending out > code. > > Looks like the previous email had a version where I am working on nets. > > For those who care try this version: > > > On Thu, 2008-11-13 at 09:20 -0800, Steve Meier wrote: > >> I have done a fair amount of work on translating entire PADs ASCII file >> format projects into PCB file format. >> >> This includes translating the embedded foot prints. >> >> The attached python script does a translation minus three points >> ( thermals, netlist, pin numbers are numerically listed and not the >> alpha numeric that devices such as BGAs use) >> >> Also, it generates multiple overlapping vias that PCB complains about >> and then eliminates all but one. >> >> You might try to use it to translate the TI foot prints. Or if you like >> modify it to translate the TI foot prints. >> >> Steve Meier >> >> _______________________________________________ >> geda-user mailing list >> [email protected] >> http://www.seul.org/cgi-bin/mailman/listinfo/geda-user >> >> ------------------------------------------------------------------------ >> >> >> >> _______________________________________________ >> geda-user mailing list >> [email protected] >> http://www.seul.org/cgi-bin/mailman/listinfo/geda-user _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
