Good day, is it intended that text is rotated in such a way that you have to turn your head right (i.e. reading from top to bottom). AFAIK all standards concerning texts (e.g. DIN 406) in technical drawings demand that text is never to align in such a way and that text must always be readable either from the bottom or from the right hand side.
Greetings, Denis Grelich On Sun, 01 Feb 2009 13:36:15 +0100 Carlos Nieves Ónega <[email protected]> wrote: > Hi, > you can try attribute autoplacement. Look for "Autoplace > component/net/buses text attributes hook." in system-gschemrc. > > Attached is a PS, showing 4 groups of components. > > Each group has two columns, the left one is the component placed with > the default gschem configuration. The right one is with attribute > autoplacement on. > > Notice how the algorithm moves the refdes in the op-amp so it doesn't > intefere with pins. > > This feature can be used when rotating, or mirroring a component as > well. > > Regards, > > Carlos > > El mié, 28-01-2009 a las 17:12 +0000, Kai-Martin Knaak escribió: > > Hi, > > > > when working with gschem, I next to never want rotated text. > > However, by default attributes seem to stick to the graphics and > > rotate with it. I find myself unrotating the text after I rotated > > the symbol by 90°. An alternative is to select the graphics only. > > But this requires many mouse clicks (select symbol, click on each > > and every attribute while holding the shift key). > > > > Is there a way to configure gschem to not rotate or move the > > attributes while rotating a symbol? > > > > ---<(kaimartin)>--- > _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
