On Tue, 2009-02-03 at 01:10 -0500, DJ Delorie wrote: > > 3. I need to connect the output from my onboard switching power supply to > > the corresponding planes (5.1V/2.2A). Do you have any recommendations how > > to connect a high current trace to a plane? > > Multiple solid-connected vias. The "width" of the trace will be the > circumference of the via's hole.
I'm no expert, but you might want to use several - ought to help achieve a lower inductance connection. Also, the plating inside a via starts at no copper.. the tracks on your other layers, which start with a certain weight of copper, and are plated up from that. Unless the plating process is more aggressive in vias, this ought to mean your vias has less copper thickness. Why not just connect the switching components directly to the appropriate power plane with a number of vias each? -- Peter Clifton Electrical Engineering Division, Engineering Department, University of Cambridge, 9, JJ Thomson Avenue, Cambridge CB3 0FA Tel: +44 (0)7729 980173 - (No signal in the lab!) _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
