On Mon, Feb 16, 2009 at 6:05 PM, Ales Hvezda <[email protected]> wrote: > Hi Matt, > >>In many of my schematics, I would have multiple power symbols, and >>when I wanted them to be the same, I just connected them. However, >>that no longer works! The netlister is making them separate nets. > > I cannot seem to reproduce this in a simple schematic. Could > you do me a favor and take a look at the below schematic, netlist it with > your gnetlist (on your machine), and let me know if: > > 1) it matches what you are doing in your large schematic
Only partially. I am using multiple sheets, and have many different power connectors. I have tried to reproduce it with a smaller schematic and was unsuccessful. > 2) it netlists correctly or incorrectly for you. Your example netlists correctly. > I might not have interpreted your schematics correctly and maybe I am > missing something subtle. Did you see the same problem? The netlist I sent in the tarball shows the problem. If you rerun the netlister, do you get the same output as the netlist I sent you? If so, you have reproduced the problem :) I will try making a smaller test case again, but haven't had luck so far. I would feel better if I knew that you saw the problem in the netlist I sent. Thanks, Matt _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
