Hi, On Tue, 2009-03-31 at 22:57 +0200, Stefan Salewski wrote: > On Tue, 2009-03-31 at 11:26 +0100, richard wrote: > > > I need footprints for two capacitors, both through hole. > > I made a mistake with the letters in the filenames. > > >CAPA-2750P-3050W-1900H__Panasonic.fp > >CAPA-3750P-4150L-1800W__EPCOS.fp > > Of course it should be > > CAPA-2750P-3050L-1900W__Panasonic.fp > CAPA-3750P-4150L-1800W__EPCOS.fp >
IIRC, these should be named CAPR: CAPR-2750P-3050L-1900W__Panasonic.fp CAPR-3750P-4150L-1800W__EPCOS.fp BTW, according to IPC7351 for CAPR type footprints the height should be included, and length and width change positions: CAPR2750-1900X3050X2600.fp CAPR2750-1900X3050X2950.fp CAPR3750-1800X4150X3250.fp that is: $Type $Pitch "-" $Width "X" $Length "X" $Height Maybe even better is to state the lead diameter (d), which may vary across vendors, as well: CAPR-2750P-3050L-1900W-2600H_80d_Panasonic.fp CAPR-2750P-3050L-1900W-2950H_80d_Panasonic.fp CAPR-3750P-4150L-1800W-3250H_100d_EPCOS.fp Just my EUR 0.02 on this subject. Kind regards, Bert Timmerman > See > > http://www.luciani.org/geda/pcb/footprint-name-spec.pdf > > > > > _______________________________________________ > geda-user mailing list > [email protected] > http://www.seul.org/cgi-bin/mailman/listinfo/geda-user _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
