Yesterday I was pointed by someone to a bug in one of my slotted symbols at gedasymbols -- later I found two more related bugs.
It concerns Comp-Quad-LM339_Type-1.sym OpAmp-Dual-1.sym OpAmp-Quad-1.sym Bug should be fixed now, sorry if someone had trouble caused by these symbols. The error resulted from not carefully specifying pinseq. The symbols have something like slotdef=1:2,3,1 slotdef=2:6,5,7 slotdef=3:9,10,8 slotdef=4:13,12,14 meaning is: Use number 2 for first pin of slot 1, and numbers 6,9,13 for this pin in the other slots. But of course this works only if pinseq is correct for the 3 involved pins, i.e. it should be 1 for pin with number 2 (I forgot to change this...) I think this is an error which may occur when someone works not carefully enough, and it is not reported by gsymcheck 1.4.3. gsymcheck even gives no warning if slot 1 has only 3 pins, but used pinseq 4,5,6. (Do we really SHOULD need pinseq for slotted parts? It may work without, by just replacing 2,3,1 from first slot to 6,5,7 for second -- if programmed to do so.) OK, I think we can not expect much help from gsymcheck, so we should work carefully. Best wishes, Stefan Salewski _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
