William Estrada wrote: > Hi group, > > Does anyone have a sym file for the FT232RL? > > FWIW - I'm using the FT232RL in a converter that switches 7A at 350VDC without problems. My circuit doesn't have the 47pF caps on the signal lines and the shield is connected to ground on the target board, which is 4 layers. I flooded the signal layers with additional copper and hooked every thing to ground it a reasonable density of vias.
As for the footprint, I found that the pads DJ's footprint were a bit too short for me to solder comfortably - I added 20 mils to the outside dimension on both sides and it was a lot easier. Of course, DJ made the front end really easy with the symbol, footprint & guinea pig board. Thanks, DJ! -Ethan _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
